Ok that is good news. Have then same issue when turing off and on wifi. Need to take a look at this.
Hedwin 2010/10/14 manish shakya <[email protected]>: > I am connected to one of the AP and I could ping. > > 2010/10/14 manish shakya <[email protected]> >> >> Hi Hedwin, >> >> Thanks for you patch. Now , Android Wifi Settings GUI is working.I can >> see list wireless networks available. >> >> Those are the things I did >> 1) in drivers/mmc/host/omap_hsmmc.c I did following >> >> static const struct mmc_host_ops omap_hsmmc_ops = { >> .enable = omap_hsmmc_enable_fclk, >> // .disable = omap_hsmmc_disable_fclk, >> .request = omap_hsmmc_request, >> ... >> >> 2) Used SIOCSIWPRIV from you patch. >> >> 3) Used Android Socket >> >> Till now, I haven't seen vold error. >> >> Problems that I am facing right now. >> 1) Wifi is not able to connect with AP. Wifi is always in scanning mode. >> When I try to connect with AP, GUI Shows Obaintaing IP form XXYY then show >> DISCONNECTED and then shows Scanning >> 2) Once I turned off WIfi. I can't turn it on again. >> >> I guess problem is in dhcp. >> >> With Regards, >> Manish >> 2010/10/13 manish shakya <[email protected]> >>> >>> Thanks.. >>> >>> 2010/10/13 hedwin <[email protected]> >>>> >>>> Attached. >>>> >>>> Change is in drivers/mmc/host/omap_hsmmc.c >>>> For now I commented the clk_disable. Need to take a closer to figure >>>> out what is wrong. >>>> Also saw a thread in the linux-omap kernel mailing list about the very >>>> problem. >>>> >>>> Hedwin >>>> >>>> >>>> On Wed, Oct 13, 2010 at 11:32 PM, manish shakya <[email protected]> >>>> wrote: >>>> > Hi Hedwin, >>>> > >>>> > Didn't find that patch. Can you send me link? >>>> > >>>> > On Thu, Oct 14, 2010 at 1:08 AM, hedwin <[email protected]> >>>> > wrote: >>>> >> >>>> >> The kernel patch (0001-Update-for-IGEPv2-Wifi-support.patch) already >>>> >> adds the basic SIOCSIWPRIV stuff to the libertas wireless driver. >>>> >> In eclair it is good enough to get wireless running. >>>> >> >>>> >> Hedwin >>>> >> >>>> >> >>>> >> >>>> >> On Wed, Oct 13, 2010 at 10:58 PM, manish shakya <[email protected]> >>>> >> wrote: >>>> >> > >>>> >> > I came to know SIOCSIWPRIV is required in froyo also. Do you have >>>> >> > any >>>> >> > idea >>>> >> > how it should be implement SIOCSIWPRIV? >>>> >> > >>>> >> > >>>> >> > On Wed, Oct 13, 2010 at 11:57 PM, hedwin <[email protected]> >>>> >> > wrote: >>>> >> >> >>>> >> >> Hmm, interesting. Thnx for the feedback. >>>> >> >> >>>> >> >> The vold change was needed in eclair to ignore no SD-card readers >>>> >> >> connected to an mmc interface but vold has changed in froyo so a >>>> >> >> different setup in vold >>>> >> >> could that be the reason that it is not needed anymore. >>>> >> >> Same for SIOCSIWPRIV it is required in by the eclair Wifi layer >>>> >> >> without it doesn't work >>>> >> >> >>>> >> >> The error your seeing is also socket related, it is the connection >>>> >> >> between Wifi and wpa_supplicant. Since creating sockets this way >>>> >> >> gave >>>> >> >> me >>>> >> >> quite a headache I switched to using the sockets in the android >>>> >> >> namespace. >>>> >> >> >>>> >> >> Hedwin >>>> >> >> >>>> >> >> >>>> >> >> On Wed, Oct 13, 2010 at 8:34 PM, manish shakya >>>> >> >> <[email protected]> >>>> >> >> wrote: >>>> >> >> > Hi Hedwin, >>>> >> >> > >>>> >> >> > I have solved Timeout problem as you have said in your post.I >>>> >> >> > could >>>> >> >> > not >>>> >> >> > see >>>> >> >> > the need of SIOCSIWPRIV and vold. In my case, permission for >>>> >> >> > sockets >>>> >> >> > are >>>> >> >> > fine. I tried both unix socket and android socket but both of >>>> >> >> > them >>>> >> >> > didn't >>>> >> >> > work. >>>> >> >> > >>>> >> >> > After solving timeout problem,I think ,WPA Supplicant is working >>>> >> >> > fine. >>>> >> >> > It >>>> >> >> > can scan AP and tries to connect with one one AP but it fails. >>>> >> >> > Here >>>> >> >> > is a >>>> >> >> > log >>>> >> >> > I get: >>>> >> >> > >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>>> >> >> > ifi_flags=0x1003 >>>> >> >> > ([UP]) >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface >>>> >> >> > 'wlan0' >>>> >> >> > added >>>> >> >> > D/wpa_supplicant( 1349): Received 731 bytes of scan results (4 >>>> >> >> > BSSes) >>>> >> >> > D/wpa_supplicant( 1349): Scan results: 4 >>>> >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-SCAN-RESULTS Ready >>>> >> >> > D/wpa_supplicant( 1349): Selecting BSS from priority group 0 >>>> >> >> > D/wpa_supplicant( 1349): Try to find WPA-enabled AP >>>> >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' >>>> >> >> > wpa_ie_len=26 >>>> >> >> > rsn_ie_len=0 caps=0x11 >>>> >> >> > D/wpa_supplicant( 1349): skip - SSID mismatch >>>> >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' >>>> >> >> > wpa_ie_len=0 >>>> >> >> > rsn_ie_len=0 caps=0x11 >>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>>> >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' >>>> >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 >>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>>> >> >> > D/wpa_supplicant( 1349): 3: 00:12:17:65:d9:4e ssid='Seminar ' >>>> >> >> > wpa_ie_len=0 >>>> >> >> > rsn_ie_len=0 caps=0x1 >>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>>> >> >> > D/wpa_supplicant( 1349): Try to find non-WPA AP >>>> >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' >>>> >> >> > wpa_ie_len=26 >>>> >> >> > rsn_ie_len=0 caps=0x11 >>>> >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch >>>> >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' >>>> >> >> > wpa_ie_len=0 >>>> >> >> > rsn_ie_len=0 caps=0x11 >>>> >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch >>>> >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' >>>> >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 >>>> >> >> > D/wpa_supplicant( 1349): selected non-WPA AP >>>> >> >> > 94:44:52:62:94:31 >>>> >> >> > ssid='Belkin.3431' >>>> >> >> > I/wpa_supplicant( 1349): Trying to associate with >>>> >> >> > 94:44:52:62:94:31 >>>> >> >> > (SSID='Belkin.3431' freq=2412 MHz) >>>> >> >> > D/wpa_supplicant( 1349): Cancelling scan request >>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE >>>> >> >> > D/wpa_supplicant( 1349): Automatic auth_alg selection: 0x1 >>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing AP WPA IE >>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing AP RSN IE >>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE >>>> >> >> > D/wpa_supplicant( 1349): No keys have been configured - skip key >>>> >> >> > clearing >>>> >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_set_drop_unencrypted >>>> >> >> > D/wpa_supplicant( 1349): State: SCANNING -> ASSOCIATING >>>> >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-STATE-CHANGE id=-1 state=3 >>>> >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_set_operstate: >>>> >> >> > operstate >>>> >> >> > 0->0 >>>> >> >> > (DORMANT) >>>> >> >> > D/wpa_supplicant( 1349): WEXT: Operstate: linkmode=-1, >>>> >> >> > operstate=5 >>>> >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_associate >>>> >> >> > D/wpa_supplicant( 1349): Setting authentication timeout: 10 sec >>>> >> >> > 0 >>>> >> >> > usec >>>> >> >> > D/wpa_supplicant( 1349): EAPOL: External notification - >>>> >> >> > portControl=ForceAuthorized >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>>> >> >> > ifi_flags=0x1003 >>>> >> >> > ([UP]) >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface >>>> >> >> > 'wlan0' >>>> >> >> > added >>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b06 len=8 >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>>> >> >> > ifi_flags=0x1003 >>>> >> >> > ([UP]) >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface >>>> >> >> > 'wlan0' >>>> >> >> > added >>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b04 len=12 >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>>> >> >> > ifi_flags=0x1003 >>>> >> >> > ([UP]) >>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface >>>> >> >> > 'wlan0' >>>> >> >> > added >>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b1a len=19 >>>> >> >> > >>>> >> >> > >>>> >> >> > Interface wlan0 is added a lot of times.why?? >>>> >> >> > >>>> >> >> > >>>> >> >> > I also get following error. >>>> >> >> > E/WifiHW ( 1178): Unable to open connection to supplicant on >>>> >> >> > "/data/system/wpa_supplicant/wlan0": No such file or directory >>>> >> >> > >>>> >> >> > >>>> >> >> > With Regards, >>>> >> >> > Manish Shakya >>>> >> >> > >>>> >> >> > On Wed, Oct 13, 2010 at 10:23 AM, hedwin >>>> >> >> > <[email protected]> >>>> >> >> > wrote: >>>> >> >> >> >>>> >> >> >> kernel version is 2.6.32 but it is done in eclair. But what >>>> >> >> >> I've >>>> >> >> >> seen >>>> >> >> >> sofar is that there is not that much difference compared to >>>> >> >> >> froyo. >>>> >> >> >> >>>> >> >> >> ok, let me know if you run into issues. >>>> >> >> >> >>>> >> >> >> Cheers, >>>> >> >> >> Hedwin >>>> >> >> >> >>>> >> >> >> >>>> >> >> >> On Wed, Oct 13, 2010 at 4:07 PM, manish shakya >>>> >> >> >> <[email protected]> wrote: >>>> >> >> >> > Hi Hedwin, >>>> >> >> >> > >>>> >> >> >> > Thanks. Good to know you made wifi working. Which version of >>>> >> >> >> > kernel >>>> >> >> >> > are >>>> >> >> >> > you using ? I am using kernel 2.6.32 and Android 2.2 . >>>> >> >> >> > >>>> >> >> >> > I am going through you posts in rowboat mailing list. I will >>>> >> >> >> > update >>>> >> >> >> > my >>>> >> >> >> > findings. >>>> >> >> >> > >>>> >> >> >> > >>>> >> >> >> > On Wed, Oct 13, 2010 at 5:49 AM, hedwin >>>> >> >> >> > <[email protected]> >>>> >> >> >> > wrote: >>>> >> >> >> >> >>>> >> >> >> >> Hi >>>> >> >> >> >> >>>> >> >> >> >> Made android wifi work on a IGEPv2 board. This board also >>>> >> >> >> >> uses a >>>> >> >> >> >> Marvell >>>> >> >> >> >> chip. >>>> >> >> >> >> You can find my patches in the android rowboat mailing list. >>>> >> >> >> >> >>>> >> >> >> >> Btw the problem you encounter is due to the fact that the >>>> >> >> >> >> mmc >>>> >> >> >> >> gets >>>> >> >> >> >> disabled while wifi is still operational. >>>> >> >> >> >> >>>> >> >> >> >> Hedwin. >>>> >> >> >> >> >>>> >> >> >> >> On Tue, Oct 12, 2010 at 4:56 PM, Manish >>>> >> >> >> >> <[email protected]> >>>> >> >> >> >> wrote: >>>> >> >> >> >> > Hi , >>>> >> >> >> >> > >>>> >> >> >> >> > There is no place to generate those bin files. >>>> >> >> >> >> > >>>> >> >> >> >> > On Oct 12, 8:01 am, manish shakya >>>> >> >> >> >> > <[email protected]> >>>> >> >> >> >> > wrote: >>>> >> >> >> >> >> Hi Hairui >>>> >> >> >> >> >> >>>> >> >> >> >> >> Thanks for your response. >>>> >> >> >> >> >> >>>> >> >> >> >> >> Let me try to re-compiling the modules and generate >>>> >> >> >> >> >> sd8686.bin >>>> >> >> >> >> >> and >>>> >> >> >> >> >> sd8686_helper.bin files. >>>> >> >> >> >> >> BTW, what are those bin files for? >>>> >> >> >> >> >> >>>> >> >> >> >> >> ManishOn Mon, Oct 11, 2010 at 11:11 PM, hairui >>>> >> >> >> >> >> <[email protected]> >>>> >> >> >> >> >> wrote: >>>> >> >> >> >> >> > Maybe you should re-compile the modules for yourself >>>> >> >> >> >> >> > arch >>>> >> >> >> >> >> > which >>>> >> >> >> >> >> > you >>>> >> >> >> >> >> > chose to use the prebuild one. >>>> >> >> >> >> >> >>>> >> >> >> >> >> > On 10月12日, 上午2时50分, manish shakya >>>> >> >> >> >> >> > <[email protected]> >>>> >> >> >> >> >> > wrote: >>>> >> >> >> >> >> > > Hi everyone, >>>> >> >> >> >> >> >>>> >> >> >> >> >> > > I am trying to make Marvell Wifi to work on overo >>>> >> >> >> >> >> > > board >>>> >> >> >> >> >> > > running >>>> >> >> >> >> >> > > Android. >>>> >> >> >> >> >> > I >>>> >> >> >> >> >> > > am using 2.6.32 linux kernel and Android 2.2. I have >>>> >> >> >> >> >> > > put >>>> >> >> >> >> >> > > all >>>> >> >> >> >> >> > > files( >>>> >> >> >> >> >> > > libertas_sdio.ko, sd8686.bin,sd8686_helper.bin etc) >>>> >> >> >> >> >> > > in >>>> >> >> >> >> >> > > required >>>> >> >> >> >> >> > > place. >>>> >> >> >> >> >> > > I am using d8686.bin,sd8686_helper.bin from console >>>> >> >> >> >> >> > > prebuilt >>>> >> >> >> >> >> > > image >>>> >> >> >> >> >> > (2.6.34 >>>> >> >> >> >> >> > > linux ) from gumstix.It seems that libertas driver is >>>> >> >> >> >> >> > > loaded >>>> >> >> >> >> >> > > and >>>> >> >> >> >> >> > > driver >>>> >> >> >> >> >> > is >>>> >> >> >> >> >> > > able to find MAC address of the chip. But the problem >>>> >> >> >> >> >> > > is >>>> >> >> >> >> >> > > there >>>> >> >> >> >> >> > > are >>>> >> >> >> >> >> > > a lot >>>> >> >> >> >> >> > of >>>> >> >> >> >> >> > > time out after that. It seems chip is not getting >>>> >> >> >> >> >> > > command send by the processor. Below is log that I >>>> >> >> >> >> >> > > get: >>>> >> >> >> >> >> >>>> >> >> >> >> >> > > libertas_sdio: Libertas SDIO driver >>>> >> >> >> >> >> > > libertas_sdio: Copyright Pierre Ossman >>>> >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting >>>> >> >> >> >> >> > > sd8686_helper.bin >>>> >> >> >> >> >> > > init: untracked pid 1221 exited >>>> >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting >>>> >> >> >> >> >> > > sd8686.bin >>>> >> >> >> >> >> > > init: untracked pid 1224 exited >>>> >> >> >> >> >> > > libertas: 00:19:88:37:0e:dd, fw 9.70.7p0, cap >>>> >> >> >> >> >> > > 0x00000303 >>>> >> >> >> >> >> > > libertas: wlan0: Marvell WLAN 802.11 adapter >>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: Received result 0 to command 6 after 1 >>>> >> >> >> >> >> > > retries >>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x0013 >>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x0013 failed: -110 >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x0010 >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x0010 >>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x0006 >>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x0006 failed: -110 >>>> >> >> >> >> >> > > libertas: SCAN_CMD failed >>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x0028 >>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout >>>> >> >> >> >> >> > > (#1) >>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout >>>> >> >> >> >> >> > > (#2) >>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout >>>> >> >> >> >> >> > > (#3) >>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting command >>>> >> >> >> >> >> > > 0x002f >>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x002f failed: -110 >>>> >> >> >> >> >> >>>> >> >> >> >> >> > > Any ideas would be really appreciated. >>>> >> >> >> >> >> >>>> >> >> >> >> >> > > Manish Shakya >>>> >> >> >> >> >> >>>> >> >> >> >> >> > -- >>>> >> >> >> >> >> > unsubscribe: >>>> >> >> >> >> >> > >>>> >> >> >> >> >> > >>>> >> >> >> >> >> > >>>> >> >> >> >> >> > >>>> >> >> >> >> >> > [email protected]<android-porting%[email protected]> >>>> >> >> >> >> >> > website:http://groups.google.com/group/android-porting >>>> >> >> >> >> >> >>>> >> >> >> >> >> >>>> >> >> >> >> > >>>> >> >> >> >> > -- >>>> >> >> >> >> > unsubscribe: [email protected] >>>> >> >> >> >> > website: http://groups.google.com/group/android-porting >>>> >> >> >> >> > >>>> >> >> >> > >>>> >> >> >> > >>>> >> >> >> > >>>> >> >> >> > -- >>>> >> >> >> > Manish Shakya >>>> >> >> >> > http://www.manishshakya.com.np >>>> >> >> >> > http://secs.oakland.edu/~ganesan/iMX/ >>>> >> >> >> > >>>> >> >> > >>>> >> >> > >>>> >> >> > >>>> >> >> > -- >>>> >> >> > Manish Shakya >>>> >> >> > http://www.manishshakya.com.np >>>> >> >> > http://secs.oakland.edu/~ganesan/iMX/ >>>> >> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > -- >>>> >> > Manish Shakya >>>> >> > http://www.manishshakya.com.np >>>> >> > http://secs.oakland.edu/~ganesan/iMX/ >>>> >> > >>>> >> >>>> >> -- >>>> >> unsubscribe: [email protected] >>>> >> website: http://groups.google.com/group/android-porting >>>> > >>>> > >>>> > >>>> > -- >>>> > Manish Shakya >>>> > http://www.manishshakya.com.np >>>> > http://secs.oakland.edu/~ganesan/iMX/ >>>> > >>> >>> >>> >>> -- >>> Manish Shakya >>> http://www.manishshakya.com.np >>> http://secs.oakland.edu/~ganesan/iMX/ >> >> >> >> -- >> Manish Shakya >> http://www.manishshakya.com.np >> http://secs.oakland.edu/~ganesan/iMX/ > > > > -- > Manish Shakya > http://www.manishshakya.com.np > http://secs.oakland.edu/~ganesan/iMX/ > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
