all the encoder setting calls fails., probably when u use google tree code, pv sw-encoders are used, where as q-com hw accelerated encoders should be used.
to rule out that, try with very low resolution like QCIF, lower mbps settings? PS. of course, 'm not sure if google tree code should be expected to be working out-of-the-box for all the use-cases in nexus On Fri, Oct 22, 2010 at 2:19 AM, Tomasz Zawada <[email protected]> wrote: > Hi, > > I did a simple source Android build from the head/trunk. > > When installed on my Nexus One everything seems fine except for the > camera app. > The app launches but there is no preview at all and when switched to > Video it crashes. > > Any ideas? > > > This is the output from logcat on the photo mode: > > > 10-21 22:46:18.519: INFO/ActivityManager(85): Starting activity: > Intent { act=android.intent.action.MAIN > cat=[android.intent.category.LAUNCHER] flg=0x10200000 > cmp=com.android.camera/.Camera } > 10-21 22:46:18.569: INFO/WindowManager(85): Setting rotation to 1, > animFlags=1 > 10-21 22:46:18.609: INFO/ActivityManager(85): Config changed: > { scale=1.0 imsi=234/10 loc=en_GB touch=3 keys=1/1/2 nav=3/1 orien=2 > layout=34 uiMode=17 seq=8} > 10-21 22:46:18.739: DEBUG/QualcommCameraHardware(59): createInstance: > E > 10-21 22:46:18.739: DEBUG/QualcommCameraHardware(59): Storing the > current target type as 1 > 10-21 22:46:18.739: DEBUG/QualcommCameraHardware(59): constructor EX > 10-21 22:46:18.739: DEBUG/QualcommCameraHardware(59): startCamera E > 10-21 22:46:18.739: DEBUG/QualcommCameraHardware(59): loading > liboemcamera at 0xb0016100 > 10-21 22:46:18.739: INFO/QualcommCameraHardware(59): Set main cam and > main cam only > 10-21 22:46:18.739: INFO/mm-camera-mmap(59): set sensor selection :0 > 10-21 22:46:18.899: VERBOSE/RenderScript_jni(166): surfaceDestroyed > 10-21 22:46:18.959: INFO/QualcommCameraHardware(59): Open Device > node : /dev/msm_camera/control0 > 10-21 22:46:18.959: INFO/mm-camera-config(59): cam_conf fd > cfgctrl.camfd:0 > 10-21 22:46:18.959: INFO/mm-camera-config(59): Open config device > node : /dev/msm_camera/config0 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration]:ctrlfd:21 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] read fuse ID fail > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] cfg.fuse_id_word1:0x0 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] cfg.fuse_id_word2:0x0 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] cfg.fuse_id_word3:0x0 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] cfg.fuse_id_word4:0x0 > 10-21 22:46:18.959: DEBUG/mm-camera-s5k3e2fx_u(59): lcd type = 0 > 10-21 22:46:18.959: INFO/(59): [AWB Calibration] rg_ratio_GS_table[0]: > 0.733340 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] rg_ratio_GS_table[1]: > 0.733340 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] rg_ratio_GS_table[2]: > 0.716810 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] bg_ratio_GS_table[0]: > 0.601600 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] bg_ratio_GS_table[1]: > 0.601600 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] bg_ratio_GS_table[2]: > 0.590178 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] > sfuse.fuse_id_word1:0x0 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] > sfuse.fuse_id_word2:0x0 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] > sfuse.fuse_id_word3:0x0 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] > sfuse.fuse_id_word4:0x0 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] fuse_id : 0x0, 0x0, > 0x0, 0x0 > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] fail to read /data/ > awb_cal > 10-21 22:46:18.969: INFO/(59): [AWB Calibration] fail to read from > file:/sys/android_camera_awb_cal/awb_cal > 10-21 22:46:18.979: INFO/mm-camera-aec(59): Touch AEC == numRegions: > 256 > 10-21 22:46:18.979: INFO/mm-camera-aec(59): Touch AEC aecCtrl- >>aec_state.aec_algo:1 > 10-21 22:46:18.979: INFO/QualcommCameraHardware(59): startCamera: > camsensor name s5k3e2fx, flash 1 > 10-21 22:46:18.979: DEBUG/QualcommCameraHardware(59): startCamera X > 10-21 22:46:18.979: DEBUG/QualcommCameraHardware(59): > initDefaultParameters E > 10-21 22:46:18.979: DEBUG/QualcommCameraHardware(59): product 5 > 10-21 22:46:18.979: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 1, length 32 > 10-21 22:46:18.989: ERROR/QualcommCameraHardware(59): > native_access_parm: error (No such file or directory): fd 20, type 1, > length 32, status 0 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 64, length 4 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 65, length 4 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 66, length 4 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): requested > preview size 768 x 432 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): requested > picture size 1024 x 768 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): value:21407, > country value:214, country code:214 > 10-21 22:46:18.989: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 21, length 4 > 10-21 22:46:18.999: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 14, length 4 > 10-21 22:46:18.999: DEBUG/QualcommCameraHardware(59): setFlash 0 > 10-21 22:46:18.999: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 49, length 4 > 10-21 22:46:18.999: DEBUG/mm-camera-ctrlcmd(59): In > config_proc_CAMERA_SET_PARM_LED_MODE: 0 > 10-21 22:46:18.999: INFO/QualcommCameraHardware(59): Set zoom=0 20 > 10-21 22:46:18.999: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 2, length 4 > 10-21 22:46:18.999: INFO/QualcommCameraHardware(59): Setting Contrast > is 5 > 10-21 22:46:18.999: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 6, length 4 > 10-21 22:46:18.999: INFO/QualcommCameraHardware(59): Setting > Brightness is 3 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 7, length 4 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 12, length 4 > 10-21 22:46:19.009: INFO/mm-camera-ctrlcmd(59): md.d.aec_mode.aec_mode: > 1 > 10-21 22:46:19.009: INFO/mm-camera-aec(59): Touch AEC == numRegions: > 256 > 10-21 22:46:19.009: INFO/mm-camera-aec(59): Touch AEC aecCtrl- >>aec_state.aec_algo:1 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): not defined > touch-focus yet, or AP without touch-focus function > 10-21 22:46:19.009: INFO/QualcommCameraHardware(59): Before Setting > coordinate x:384 y:216 > 10-21 22:46:19.009: INFO/QualcommCameraHardware(59): Setting > coordinate x:2 y:2 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 60, length 28 > 10-21 22:46:19.009: INFO/mm-camera 8x vfe(59): vfe_set_coordinate x:2 > y:2 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 26, length 4 > 10-21 22:46:19.009: DEBUG/mm-camera-ctrlcmd(59): md.d.aec_iso_mode = 0 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 62, length 4 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 8, length 4 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): virtual > android::status_t android::QualcommCameraHardware::setParameters(const > android::CameraParameters&), final_rc=0 > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): > initDefaultParameters X > 10-21 22:46:19.009: DEBUG/QualcommCameraHardware(59): createInstance: > X created hardware=0x44b78 > 10-21 22:46:19.019: DEBUG/Camera(435): app passed NULL surface > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): requested > preview size 640 x 480 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): requested > picture size 2048 x 1536 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): value:21407, > country value:214, country code:214 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 21, length 4 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 14, length 4 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): setFlash 1 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 49, length 4 > 10-21 22:46:19.029: DEBUG/mm-camera-ctrlcmd(59): In > config_proc_CAMERA_SET_PARM_LED_MODE: 1 > 10-21 22:46:19.029: INFO/QualcommCameraHardware(59): Set zoom=0 20 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 2, length 4 > 10-21 22:46:19.029: INFO/QualcommCameraHardware(59): Setting Contrast > is 5 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 6, length 4 > 10-21 22:46:19.029: INFO/QualcommCameraHardware(59): Setting > Brightness is 3 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 7, length 4 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 12, length 4 > 10-21 22:46:19.029: INFO/mm-camera-ctrlcmd(59): md.d.aec_mode.aec_mode: > 1 > 10-21 22:46:19.029: INFO/mm-camera-aec(59): Touch AEC == numRegions: > 256 > 10-21 22:46:19.029: INFO/mm-camera-aec(59): Touch AEC aecCtrl- >>aec_state.aec_algo:1 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): not defined > touch-focus yet, or AP without touch-focus function > 10-21 22:46:19.029: INFO/QualcommCameraHardware(59): Before Setting > coordinate x:320 y:240 > 10-21 22:46:19.029: INFO/QualcommCameraHardware(59): Setting > coordinate x:2 y:2 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 60, length 28 > 10-21 22:46:19.029: INFO/mm-camera 8x vfe(59): vfe_set_coordinate x:2 > y:2 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 26, length 4 > 10-21 22:46:19.029: DEBUG/mm-camera-ctrlcmd(59): md.d.aec_iso_mode = 0 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 62, length 4 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 8, length 4 > 10-21 22:46:19.029: DEBUG/QualcommCameraHardware(59): virtual > android::status_t android::QualcommCameraHardware::setParameters(const > android::CameraParameters&), final_rc=0 > 10-21 22:46:19.039: VERBOSE/camera(435): startPreview > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): startPreview E > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initPreview E: > preview size=640x480 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initPreview E: > preview size=640x480 videosize = 640 x 480 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initPreview : > preview size=640x480 videosize = 640 x 480 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): pmem pool /dev/ > pmem_adsp ioctl(fd = 32, PMEM_GET_SIZE) is 2097152 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): > mBufferSize=460800, mAlignedBufferSize=524288 > 10-21 22:46:19.039: ERROR/QualcommCameraHardware(59): num_buffers = 4 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 30, reg = 0 buffer = 0x40e19000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 30, reg = 0 buffer = 0x40e99000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 30, reg = 0 buffer = 0x40f19000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 30, reg = 0 buffer = 0x40f99000 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initREcord E > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): pmem pool /dev/ > pmem_adsp ioctl(fd = 35, PMEM_GET_SIZE) is 4194304 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): > mBufferSize=460800, mAlignedBufferSize=524288 > 10-21 22:46:19.039: ERROR/QualcommCameraHardware(59): num_buffers = 8 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41019000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41099000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41119000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41199000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41219000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41299000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41319000 > 10-21 22:46:19.039: INFO/QualcommCameraHardware(59): register_buf: > camfd = 33, reg = 0 buffer = 0x41399000 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1090621440 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1091145728 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1091670016 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1092194304 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1092718592 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1093242880 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1093767168 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initRecord : > record heap , video buffers buffer=1094291456 fd=35 y_off=0 > cbcr_off=307200 > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): initREcord X > 10-21 22:46:19.039: DEBUG/QualcommCameraHardware(59): > native_access_parm: fd 20, type 1, length 32 > 10-21 22:46:19.059: DEBUG/QualcommCameraHardware(59): initpreview > before cam_frame thread carete , video frame buffer=1092194304 fd=35 > y_off=0 cbcr_off=307200 > 10-21 22:46:19.059: DEBUG/QualcommCameraHardware(59): initPreview X: 1 > 10-21 22:46:19.059: DEBUG/mm-camera 8x vfe(59): vfe_enable_vfe: ctrl- >>state is 0 > 10-21 22:46:19.059: DEBUG/mm-camera 8x vfe(59): vfe_enable_vfe: set > ctrl->state = CAMERA_STATE_VFE_ENABLED > 10-21 22:46:19.069: DEBUG/QualcommCameraHardware(59): frame_thread E > 10-21 22:46:19.069: INFO/mm-camera(59): Open Device node : /dev/ > msm_camera/frame0 > 10-21 22:46:19.109: ERROR/mm-camera 8x vfe(59): > vfe_util_updaterollofftbl: sensor doesn't support rolloff correction > by VFE > 10-21 22:46:19.186: DEBUG/QualcommCameraHardware(59): startPreview X > 10-21 22:46:19.219: INFO/ActivityManager(85): Displayed activity > com.android.camera/.Camera: 646 ms (total 646 ms) > 10-21 22:46:19.219: ERROR/mm-camera-config(59): cam_conf: > MSM_CAM_IOCTL_GET_STATS failed!! > 10-21 22:46:19.219: ERROR/mm-camera-config(59): cam_conf: get > MSM_CAM_IOCTL_GET_STATS failed but cam_conf_exit=0 > 10-21 22:46:19.269: WARN/IInputConnectionWrapper(166): showStatusIcon > on inactive InputConnection > 10-21 22:46:19.449: VERBOSE/GLRootView(435): onSurfaceChanged: > 645x480, gl10: com.google.android.gles_jni.gli...@450ac948 > 10-21 22:46:19.449: VERBOSE/GLRootView(435): layout content pane > 645x480 > 10-21 22:46:20.310: INFO/wpa_supplicant(304): CTRL-EVENT-DISCONNECTED > - Disconnect event - remove keys > 10-21 22:46:20.310: INFO/wpa_supplicant(304): CTRL-EVENT-STATE-CHANGE > id=0 state=0 BSSID=00:00:00:00:00:00 > 10-21 22:46:20.310: VERBOSE/WifiMonitor(85): Event [CTRL-EVENT- > DISCONNECTED - Disconnect event - remove keys] > 10-21 22:46:20.310: VERBOSE/WifiMonitor(85): Event [CTRL-EVENT-STATE- > CHANGE id=0 state=0 BSSID=00:00:00:00:00:00] > > > Log cat from Video mode: > > 10-21 22:48:05.079: INFO/ActivityManager(85): Displayed activity > com.android.camera/.VideoCamera: 424 ms (total 424 ms) > 10-21 22:48:05.089: VERBOSE/videocamera(435): initializeRecorder > 10-21 22:48:05.150: ERROR/audio_input(59): unsupported parameter: x- > pvmf/media-input-node/cap-config-interface;valtype=key_specific_value > 10-21 22:48:05.150: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=37:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.150: ERROR/CameraInput(59): Unsupported parameter(x- > pvmf/media-input-node/cap-config-interface;valtype=key_specific_value) > 10-21 22:48:05.150: ERROR/CameraInput(59): VerifiyAndSetParameter > failed on parameter #0 > 10-21 22:48:05.150: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=39:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.150: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=44:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.150: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=44:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.159: DEBUG/AuthorDriver(59): > setParamVideoEncodingBitrate() 3000000 > 10-21 22:48:05.159: WARN/AuthorDriver(59): Use default video fps range > [5 20] > 10-21 22:48:05.159: WARN/AuthorDriver(59): Intended video encoding > frame rate (24 fps) is too large and will be set to (20 fps) > 10-21 22:48:05.159: WARN/AuthorDriver(59): Use default video width > range [176 352] > 10-21 22:48:05.159: WARN/AuthorDriver(59): Intended video encoding > frame width (720) is too large and will be set to (352) > 10-21 22:48:05.159: WARN/AuthorDriver(59): Use default video height > range [144 288] > 10-21 22:48:05.159: WARN/AuthorDriver(59): Intended video encoding > frame height (480) is too large and will be set to (288) > 10-21 22:48:05.169: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=62:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.169: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=62:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.179: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=69:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.179: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=69:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.179: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=73:PVAuthorEngineNodeUtility::NodeCommandCompleted > 10-21 22:48:05.179: ERROR/PV(59): > PVLOG:TID(0x2a160):Time=73:PVAuthorEngineNodeUtility::NodeCommandCompleted: > Command failed - context=0x72fa8, status=0xfffffffb > 10-21 22:48:05.179: WARN/AuthorDriver(59): Use default video bps range > [192000 420000] > 10-21 22:48:05.179: WARN/AuthorDriver(59): Intended video encoding bit > rate (3000000 bps) is too large and will be set to (420000 bps) > 10-21 22:48:05.179: ERROR/AuthorDriver(59): Command 6 completed with > error -5 > 10-21 22:48:05.179: DEBUG/AndroidRuntime(435): Shutting down VM > 10-21 22:48:05.179: WARN/dalvikvm(435): threadid=1: thread exiting > with uncaught exception (group=0x4001d7f0) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): FATAL EXCEPTION: main > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): > java.lang.RuntimeException: setVideoEncoder failed. > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > android.media.MediaRecorder.setVideoEncoder(Native Method) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > android.media.MediaRecorder.setProfile(MediaRecorder.java:277) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > com.android.camera.VideoCamera.initializeRecorder(VideoCamera.java: > 900) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > com.android.camera.VideoCamera.access$300(VideoCamera.java:85) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > com.android.camera.VideoCamera > $MainHandler.handleMessage(VideoCamera.java:201) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > android.os.Handler.dispatchMessage(Handler.java:99) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > android.os.Looper.loop(Looper.java:123) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > android.app.ActivityThread.main(ActivityThread.java:4627) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > java.lang.reflect.Method.invokeNative(Native Method) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > java.lang.reflect.Method.invoke(Method.java:521) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > com.android.internal.os.ZygoteInit > $MethodAndArgsCaller.run(ZygoteInit.java:868) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) > 10-21 22:48:05.199: ERROR/AndroidRuntime(435): at > dalvik.system.NativeStart.main(Native Method) > 10-21 22:48:05.219: WARN/ActivityManager(85): Force finishing > activity com.android.camera/.VideoCamera > 10-21 22:48:05.259: INFO/WindowManager(85): Setting rotation to 0, > animFlags=1 > 10-21 22:48:05.279: INFO/ActivityManager(85): Config changed: > { scale=1.0 imsi=234/10 loc=en_GB touch=3 keys=1/1/2 nav=3/1 orien=1 > layout=34 uiMode=17 seq=9} > 10-21 22:48:05.729: WARN/ActivityManager(85): Activity pause timeout > for HistoryRecord{451bd940 com.android.camera/.VideoCamera} > 10-21 22:48:05.779: VERBOSE/RenderScript_jni(166): surfaceCreated > 10-21 22:48:05.779: VERBOSE/RenderScript_jni(166): surfaceChanged > > > > > My phone: > > Nexus One > Baseband: 32.36.00.28H_4.06.00.12_7 > Kernel: 2.6.32.9-27227-g3c98b0d > > -- > unsubscribe: [email protected] > website: http://groups.google.com/group/android-porting > -- Regards, Deva www.bittoggler.com -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
