Hi all, After completion of boot process i got console but fails to launch android desktop on froyo-dsp version of image Please help me in getting the Android desktop on froyo dsp version of image And observed some power management debug messages keeps prints in the console request_suspend_state: wakeup (0->0) at 188331054694 (2000-01-01 00:03:06.892120367 UTC) init: untracked pid 1516 exited request_suspend_state: wakeup (0->0) at 193324920652 (2000-01-01 00:03:11.885986325 UTC) init: untracked pid 1534 exited request_suspend_state: wakeup (0->0) at 198411407472 (2000-01-01 00:03:16.972473145 UTC) init: untracked pid 1552 exited ps -ae USER PID PPID VSIZE RSS WCHAN PC NAME # ps USER PID PPID VSIZE RSS WCHAN PC NAME root 1 0 308 216 c00bd7dc 0000cdbc S /init root 2 0 0 0 c006f240 00000000 S kthreadd root 3 2 0 0 c0061cfc 00000000 S ksoftirqd/0 root 4 2 0 0 c0085e8c 00000000 S watchdog/0 root 5 2 0 0 c006c220 00000000 S events/0 root 6 2 0 0 c006c220 00000000 S khelper root 10 2 0 0 c0074818 00000000 S async/mgr root 13 2 0 0 c006c220 00000000 S suspend root 183 2 0 0 c009abd8 00000000 S sync_supers root 185 2 0 0 c009b408 00000000 S bdi-default root 187 2 0 0 c006c220 00000000 S kblockd/0 root 196 2 0 0 c006c220 00000000 S omap2_mcspi root 207 2 0 0 c006c220 00000000 S ksuspend_usbd root 211 2 0 0 c020e094 00000000 S khubd root 220 2 0 0 c006c220 00000000 S twl4030-irqchip root 221 2 0 0 c01d9080 00000000 S twl4030-irq root 249 2 0 0 c006c220 00000000 S kmmcd root 264 2 0 0 c006c220 00000000 S musb_hdrc root 266 2 0 0 c006c220 00000000 S rpciod/0 root 273 2 0 0 c0086084 00000000 S khungtaskd root 274 2 0 0 c0096280 00000000 S kswapd0 root 276 2 0 0 c006c220 00000000 S aio/0 root 277 2 0 0 c006c220 00000000 S nfsiod root 278 2 0 0 c006c220 00000000 S crypto/0 root 285 2 0 0 c01a8828 00000000 S dsi root 429 2 0 0 c01ed954 00000000 S mtdblockd root 487 2 0 0 c006c220 00000000 S kondemand/0 root 488 2 0 0 c006c220 00000000 S kconservative/0 root 494 2 0 0 c006c220 00000000 S usbhid_resumer root 523 2 0 0 c026b004 00000000 S mmcqd root 528 2 0 0 c00ca978 00000000 S flush-179:0 root 529 2 0 0 c01166ec 00000000 S kjournald root 807 1 756 316 c005f9fc afd0eabc S /system/bin/sh system 809 1 820 268 c0279e6c afd0dcdc S /system/bin/servicemanager root 810 1 3756 528 ffffffff afd0e34c S /system/bin/vold root 811 1 3728 492 ffffffff afd0e34c S /system/bin/netd root 812 1 696 284 c02aeea0 afd0e66c S /system/bin/debuggerd root 813 1 1276 536 c0072ab4 afd0e34c S /system/bin/rild bluetooth 816 1 1280 580 c00bd7dc afd0ec8c S /system/bin/dbus-daemon root 817 1 816 260 c02aeea0 afd0e66c S /system/bin/installd keystore 818 1 1636 388 c02aeea0 afd0e66c S /system/bin/keystore root 819 1 3376 156 ffffffff 0000f474 S /sbin/adbd root 1028 1 22168 4376 ffffffff afd0dcdc S /system/bin/mediaserver root 1030 2 0 0 bf01b454 00000000 S DSPLINK_DPC_0 root 1031 2 0 0 bf01b454 00000000 S DSPLINK_DPC_1 root 1032 2 0 0 bf01b454 00000000 S DSPLINK_DPC_2 root 1034 2 0 0 bf01b454 00000000 S DSPLINK_DPC_3 root 1042 807 908 320 00000000 afd0da3c R ps cmemk module successfully installation log CMEMK module: built on Nov 9 2010 at 16:42:43 Reference Linux version 2.6.32 File /media/500_p1/Android/omap3evm/rowboat-android/froyo/external/ti-dsp/dvsdk_3_01_00_10/codec_engine_2_25_05_16/cetools/ packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c allocated heap buffer 0xc6000000 of size 0x4be000 cmemk initialized DSPLINK Module (1.65.00.02) created on Date: Nov 9 2010 Time: 17:44:04 SDMAK module: built on Nov 9 2010 at 16:42:48 Reference Linux version 2.6.32 File /media/500_p1/Android/omap3evm/rowboat-android/froyo/external/ti-dsp/dvsdk_3_01_00_10/codec_engine_2_25_05_16/cetools/ packages/ti/sdo/linuxutils/sdma/src/module/sdmak.c Boot log information Texas Instruments X-Loader 1.42 Starting OS Bootloader... No OOB scheme defined for oobsize 0 OneNAND: 0 kB 256 MiB U-Boot 2008.10-dirty (Oct 27 2009 - 19:10:08) OMAP35X-Family-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 EVM board + LPDDR/NAND In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 OMAP3_EVM # setenv bootargs_econ 'mem=80M console=tty0 console=ttyS0,115200n8 androidboot.console=ttyS0 root=/dev/mmcblk0p2 r w init=/init rootwait omap_vout.vid1_static_vrfb_alloc=y omap_vout.video1_numbuffers=3 omap_vout.video1_bufsize=614400 omap_v out.video2_numbuffers=0 i2c_bus=3,100';setenv bootcmd 'mmcinit;fatload mmc 0 0x81c00000 uImage;setenv bootargs $(bootargs_ec on);bootm 0x81c00000';run bootcmd reading uImage 2405852 bytes read ## Booting kernel from Legacy Image at 81c00000 ... Image Name: Linux-2.6.32 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2405788 Bytes = 2.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux.......................................................................................................... ............................................. done, booting the kernel. Linux version 2.6.32 (an...@anand-desktop) (gcc version 4.4.0 (GCC) ) #6 Tue Sep 28 15:43:46 IST 2010 CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 EVM Memory policy: ECC disabled, Data cache writeback OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp ) SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 Reserving 4194304 bytes SDRAM for VRAM Built 1 zonelists in Zone order, mobility grouping on. Total pages: 20320 Kernel command line: mem=80M console=tty0 console=ttyS0,115200n8 androidboot.console=ttyS0 root=/dev/mmcblk0p2 rw init=/init rootwait omap_vout.vid1_static_vrfb_alloc=y omap_vout.video1_numbuffers=3 omap_vout.video1_bufsize=614400 omap_vout.video2_nu mbuffers=0 i2c_bus=3,100 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 80MB = 80MB total Memory: 71720KB available (4156K code, 805K data, 168K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:402 Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz Reprogramming SDRC clock to 332000000 Hz GPMC revision 5.0 IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP GPIO hardware version 2.5 OMAP clockevent source: GPTIMER1 at 32768 Hz Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 omap3evmdc: Driver registration complete OMAP DMA hardware revision 4.0 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VAUX2_4030: 1800 mV normal standby regulator: VPLL2: 1800 mV normal standby regulator: VSIM: 1800 <--> 3000 mV normal standby regulator: VUSB1V5: 1500 mV normal standby regulator: VUSB1V8: 1800 mV normal standby twl_reg twl_reg.18: can't register VUSB1V8, -16 twl_reg: probe of twl_reg.18 failed with error -16 i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz Switching to clocksource 32k_counter musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. OMAP35x Linux PSP version 03.00.01.06 (OMAP3EVM) NetWinder Floating Point Emulator V0.97 (double precision) ashmem: initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. msgmni has been set to 140 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) OMAP DSS rev 2.0 OMAP DISPC rev 3.0 OMAP VENC rev 2 OMAP DSI rev 1.0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 console [ttyS0] enabled serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 brd: module loaded loop: module loaded omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) Creating 5 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000080000 : "xloader-nand" 0x000000080000-0x000000240000 : "uboot-nand" 0x000000240000-0x000000280000 : "params-nand" 0x000000280000-0x000000780000 : "linux-nand" 0x000000780000-0x000010000000 : "jffs2-nand" OneNAND driver initializing omap2-onenand omap2-onenand: Cannot request GPMC CS omap2-onenand: probe of omap2-onenand failed with error -16 smsc911x: Driver version 2008-10-21. smsc911x-mdio: probed eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1) net eth0: MAC Address: 00:50:c2:7e:8c:66 usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OMAP-EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd usb usb1: SerialNumber: ehci-omap.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbtest android init android_probe pdata: c046fa80 android_bind android_usb gadget: android_usb ready musb_hdrc musb_hdrc: MUSB HDRC host driver musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: MUSB HDRC host driver usb usb2: Manufacturer: Linux 2.6.32 musb-hcd usb usb2: SerialNumber: musb_hdrc hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected f_adb init android_register_function adb adb_bind_config f_mass_storage init android_register_function usb_mass_storage input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0 ads7846 spi1.0: touchscreen, irq 335 input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input1 using rtc device, twl_rtc, for alarms twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 twl_rtc twl_rtc: Power up reset detected. twl_rtc twl_rtc: Enabling TWL-RTC. i2c /dev entries driver Linux video capture interface: v2.00 tvp514x 3-005d: Registered to v4l2 master omap34xxcam!! usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' logger: created 64K log 'log_system' Advanced Linux Sound Architecture Driver Version 1.0.21. usbcore: registered new interface driver snd-usb-audio No device for DAI omap-mcbsp-dai-0 No device for DAI omap-mcbsp-dai-1 No device for DAI omap-mcbsp-dai-2 No device for DAI omap-mcbsp-dai-3 No device for DAI omap-mcbsp-dai-4 OMAP3 EVM SoC init asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok ALSA device list: #0: omap3evm (twl4030) TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 Power Management for TI OMAP3. SmartReflex driver initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) Waiting for root device /dev/mmcblk0p2... mmc0: new high speed SD card at address b368 mmcblk0: mmc0:b368 SD 1.88 GiB mmcblk0: p1 p2 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): recovery complete EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 168K Warning: unable to open an initial console. init: cannot open '/initlogo.rle' CMEMK module: built on Nov 9 2010 at 16:42:43 Reference Linux version 2.6.32 File /media/500_p1/Android/omap3evm/rowboat-android/froyo/external/ti-dsp/dvsdk_3_01_00_10/codec_engine_2_25_05_16/cetools/ packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c allocated heap buffer 0xc6000000 of size 0x4be000 cmemk initialized DSPLINK Module (1.65.00.02) created on Date: Nov 9 2010 Time: 17:44:04 SDMAK module: built on Nov 9 2010 at 16:42:48 Reference Linux version 2.6.32 File /media/500_p1/Android/omap3evm/rowboat-android/froyo/external/ti-dsp/dvsdk_3_01_00_10/codec_engine_2_25_05_16/cetools/ packages/ti/sdo/linuxutils/sdma/src/module/sdmak.c init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' # enabling adb adb_open request_suspend_state: wakeup (3->0) at 11775970456 (2000-01-01 00:00:10.337036129 UTC) init: untracked pid 815 exited request_suspend_state: wakeup (0->0) at 13415863039 (2000-01-01 00:00:11.976928712 UTC) init: untracked pid 883 exited .. .. .. Thanks and regards, Ananth. -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
