Hi Deva, >can you try "stop adbd;start adbd" in host side? *root@srinidhi-desktop:/home/srinidhi# stop adbd stop: Unknown job: adbd root@srinidhi-desktop:/home/srinidhi# start adbd start: Unknown job: adbd* >did u see usb attached in debug mode, in android home screen notification? Yes USB debugging mode is enabled Settings->Applications->Development->USB debugging
Here is the dmesg output when Hawkboard is connected to host system. root@srinidhi-desktop:/home/srinidhi# dmesg [18681.042718] usb 1-1.5: new high speed USB device using ehci_hcd and address 11 [18681.126440] usb 1-1.5: device descriptor read/64, error -71 [18681.314516] usb 1-1.5: device descriptor read/64, error -71 [18681.490472] usb 1-1.5: new high speed USB device using ehci_hcd and address 12 [18681.574211] usb 1-1.5: device descriptor read/64, error -71 [18681.762165] usb 1-1.5: device descriptor read/64, error -71 [18681.938039] usb 1-1.5: new high speed USB device using ehci_hcd and address 13 [18682.357697] usb 1-1.5: device not accepting address 13, error -71 [18682.429856] usb 1-1.5: new high speed USB device using ehci_hcd and address 14 [18682.845481] usb 1-1.5: device not accepting address 14, error -71 [18682.845624] hub 1-1:1.0: unable to enumerate USB device on port 5 I have made sure that adbd service is started on hawkboard. # start adbd # adbd cannot bind 'tcp:5037' Thanks Srinidhi On Fri, Jan 21, 2011 at 2:47 PM, Deva R <[email protected]> wrote: > Srinidhi, > > thats an optional step (to make sure omap device is listed under > ubuntu host), we can skip and continue.. > > I check ADB over USB/ethernet on froyo, with oamp4 blaze.., so we can > check if any problem > > >root@srinidhi-desktop:/home/srinidhi/Android_Froyo/Golden_images/android_fs# > adb devices > >List of devices attached > > > here u should've seen device lsited., > can you try "stop adbd;start adbd" in host side? > also, did u see usb attached in debug mode, in android home screen > notification? > > On Thu, Jan 13, 2011 at 3:07 PM, Srinidhi K V <[email protected]> > wrote: > > Hi, > > I am trying to establish ADB connection over USB OTG on hawk board. I am > > following instructions as per this > > http://omappedia.org/wiki/Support_Tools#ADB_over_USB. I am using Ubuntu > > Lucid and it does not have /proc/bus/usb . Hence > > > > $ sudo mount -t usbfs none /proc/bus/usb gives an error > > mount: mount point /proc/bus/usb does not exist > > > > How do i go further? Has some one established ADB over USB on Hawk > board? > > Any pointers would be of great help > > > > Thanks > > Srinidhi KV > > > > > > -- > Regards, > Deva > www.bittoggler.com > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
