Hi All Dsp Interface part present on android ginger bread is still for froyo kernel, one quick option would be to use the android froyo kernel itself.
Regards Kiran On Sat, Jan 22, 2011 at 1:45 PM, hardik patel <[email protected]> wrote: > Hi, > > After comment dsp related service still we are facing issue. it again > crash at while loading file system. > > To download kernel we have use below path : > > http://android.git.kernel.org/?p=kernel/common.git;a=summary > > One thing i notice if i download 2.6.35 kernel from > "http://android.git.kernel.org/?p=kernel/linux-2.6.git;a=summary"; link > then i am not able to find kernel with Android compatible means i am > not able to find android linux kernel specific changes (Ex Ashmem and > Wakelock etc... ) Why it so i am not able to understand that .... > > Do not use kernel from linux2.6.git path .... Other thing that i > observed that if i download kernel form > "http://git.omapzoom.org/?p=kernel/omap.git;a=summary"; git then source > is different then from " > http://android.git.kernel.org/?p=kernel/common.git;a=summary"; tree > ,... Specifically i have seen OMAP 3630 zoom3 related change is huge > why this much difference between this kernel .... if any one can help > to identify this difference then it is good ... > > I am using froyo Android file system not gingerbread ...because we are > still compiling gingerbread (Android 2.3) on 64 bit setup ... we are > facing lot of issue while building filesystem .... we are not getting > vendot directory while check out gingerbread code ... how can we get > this ? we want ti folder... > > > On Thu, Jan 20, 2011 at 1:40 PM, Alok <[email protected]> wrote: > > Hi Hardik, > > > > We are also going to start this activity. > > Could you please provide few information > > > > Did you resolve by not starting dsp related service? > > Is it feasible porting android 2.6.35 on zoom3? > > Did you download the kernel code from google git repository? where > > from u downloaded the code? > > Does ti provide any support for 2.6.35 kernel for android? > > > > > > > > Regards, > > -Alok > > > > On Jan 19, 2:05 pm, Deva R <[email protected]> wrote: > >> ><5>init: process 'baseimage', pid 782 exited > >> >init: process 'baseimage', pid 782 exited > >> > >> try basic bootup first, without dsp support.. > >> probably dsp firmware is not present, or dsp bridge needs fix/patch > >> for GB migration. > >> > >> <comment below service> > >> # load DSP firmware > >> service baseimage /system/bin/cexec.out > /system/lib/dsp/baseimage.dof > >> user root > >> group audio > >> oneshot > >> > >> On Tue, Jan 18, 2011 at 10:23 PM, hardik patel <[email protected]> > wrote: > >> > Hi, > >> > >> > I am working on OMAP 3630 zoom3 board. I am doing kernel 2.6.35 > >> > porting for this board for Ginger bread version. While booting my > >> > Kernel uImage on board i got carsh on mediaserver service see below > >> > log. > >> > >> > MMC1 Initalization OK > >> > >> > 2954888 bytes read > >> > ## Booting image at 81c00000 ... > >> > Image Name: Linux-2.6.35.7 > >> > Image Type: ARM Linux Kernel Image (uncompressed) > >> > Data Size: 2954824 Bytes = 2.8 MB > >> > Load Address: 80008000 > >> > Entry Point: 80008000 > >> > Verifying Checksum ... OK > >> > OK > >> > >> > Starting kernel ... > >> > >> > Uncompressing Linux... done, booting the kernel. > >> > <6>Initializing cgroup subsys cpu > >> > <5>Linux version 2.6.35.7 (user@user-desktop) (gcc version 4.3.2 > >> > (Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Mon Jan 17 11:23:03 IST > >> > 2011 > >> > CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f > >> > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > >> > Machine: OMAP Zoom3 board > >> > Memory policy: ECC disabled, Data cache writeback > >> > <7>On node 0 totalpages: 131072 > >> > <7>free_area_init_node: node 0, pgdat c05c0f60, node_mem_map c0699000 > >> > <7> Normal zone: 1024 pages used for memmap > >> > <7> Normal zone: 0 pages reserved > >> > <7> Normal zone: 130048 pages, LIFO batch:31 > >> > <6>OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk ) > >> > <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 > >> > <6>Reserving 4194304 bytes SDRAM for VRAM > >> > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 130048 > >> > <5>Kernel command line: androidboot.console=ttyS0 > >> > console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=512M > >> > init=/init videoout=omap24xxvout omap_vout.video1_numbuffers=6 > >> > omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" user_debug=31 > >> > <6>PID hash table entries: 2048 (order: 1, 8192 bytes) > >> > <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > >> > <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > >> > <6>Memory: 512MB = 512MB total > >> > <5>Memory: 508952k/508952k available, 15336k reserved, 0K highmem > >> > <5>Virtual kernel memory layout: > >> > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > >> > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > >> > DMA : 0xffc00000 - 0xffe00000 ( 2 MB) > >> > vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) > >> > lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) > >> > pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > >> > modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > >> > .init : 0xc0008000 - 0xc0038000 ( 192 kB) > >> > .text : 0xc0038000 - 0xc0552000 (5224 kB) > >> > .data : 0xc057a000 - 0xc05c1860 ( 287 kB) > >> > <6>Hierarchical RCU implementation. > >> > <6> RCU-based detection of stalled CPUs is disabled. > >> > <6> Verbose stalled-CPUs detection is disabled. > >> > <6>NR_IRQS:402 > >> > <6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz > >> > <3> (null): Could not get uart4_ick > >> > <3> (null): Could not get uart4_fck > >> > <4>omap_hwmod: l3_hwmod: cannot be enabled (3) > >> > <4>omap_hwmod: l4_core_hwmod: cannot be enabled (3) > >> > <4>omap_hwmod: l4_per_hwmod: cannot be enabled (3) > >> > <4>omap_hwmod: l4_wkup_hwmod: cannot be enabled (3) > >> > <6>Reprogramming SDRC clock to 400000000 Hz > >> > <6>GPMC revision 5.0 > >> > <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts > >> > <6>Total of 96 interrupts on 1 active controller > >> > <6>OMAP GPIO hardware version 2.5 > >> > <6>OMAP clockevent source: GPTIMER1 at 32768 Hz > >> > Console: colour dummy device 80x30 > >> > <6>Calibrating delay loop... <c>597.64 BogoMIPS (lpj=2334720) > >> > <6>pid_max: default: 32768 minimum: 301 > >> > Mount-cache hash table entries: 512 > >> > <6>Initializing cgroup subsys debug > >> > <6>Initializing cgroup subsys cpuacct > >> > <6>Initializing cgroup subsys freezer > >> > <6>CPU: Testing write buffer coherency: ok > >> > <6>regulator: core version 0.5 > >> > <6>NET: Registered protocol family 16 > >> > <7>mux: Setting signal i2c2_scl.i2c2_scl 0x0118 -> 0x0100 > >> > <7>mux: Setting signal i2c2_sda.i2c2_sda 0x0118 -> 0x0100 > >> > <7>mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100 > >> > <7>mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100 > >> > <7>mux: Setting signal sys_nirq.sys_nirq 0x0118 -> 0x4118 > >> > <7>mux: Setting signal gpmc_wait2.gpio64 0x0118 -> 0x0004 > >> > <6>OMAP DMA hardware revision 5.0 > >> > bio: create slab <bio-0> at 0 > >> > <5>SCSI subsystem initialized > >> > <6>usbcore: registered new interface driver usbfs > >> > <6>usbcore: registered new interface driver hub > >> > <6>usbcore: registered new device driver usb > >> > <6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz > >> > <6>twl4030: PIH (irq 7) chaining IRQs 368..375 > >> > <6>twl4030: power (irq 373) chaining IRQs 376..383 > >> > <6>twl4030: gpio (irq 368)nit: command 'chmod' r=-2 > >> > init: command 'chown' r=-2 > >> > <6>init: command 'chmod' r=-2 > >> > init: command 'chmod' r=-2 > >> > <6>init: command 'chown' r=-2 > >> > init: command 'chown' r=-2 > >> > <6>init: command 'write' r=-2 > >> > init: command 'write' r=-2 > >> > <6>init: Created socket '/dev/socket/property_service' with mode > >> > '666', user '0', group '0' > >> > init: Created socket '/dev/socket/property_service' with mode '666', > >> > user '0', group '0' > >> > <6>init: processing action 0x2c3c0 (boot) > >> > init: processing action 0x2c3c0 (boot) > >> > <6>init: command 'ifup' r=0 > >> > init: command 'ifup' r=0 > >> > <6>init: command 'chmod' r=-2 > >> > init: command 'chmod' r=-2 > >> > <5>init: starting 'console' > >> > init: starting 'console' > >> > <3>init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit' > >> > init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit' > >> > <5>init: starting 'servicemanager' > >> > init: starting 'servicemanager' > >> > <5>init: starting 'vold' > >> > init: starting 'vold' > >> > <5>init: starting 'netd' > >> > init: starting 'netd' > >> > <6>init: Created socket '/dev/socket/vold' with mode '660', user '0', > >> > group '1009' > >> > init: Created socket '/dev/socket/vold' with mode '660', user '0', > group '1009' > >> > <6>init: Created socket '/dev/socket/netd' with mode '660', user '0', > >> > group '1000' > >> > init: Created socket '/dev/socket/netd' with mode '660', user '0', > group '1000' > >> > <5>init: starting 'debuggerd' > >> > init: starting 'debuggerd' > >> > <5>init: starting 'ril-daemon' > >> > init: starting 'ril-daemon' > >> > <5>init: starting 'zygote' > >> > init: starting 'zygote' > >> > <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user > >> > '1001', group '1000' > >> > init: Created socket '/dev/socket/rild-debug' with mode '660', user > >> > '1001', group '1000' > >> > <6>init: Created socket '/dev/socket/zygote' with mode '666', user > >> > '0', group '0' > >> > init: Created socket '/dev/socket/zygote' with mode '666', user '0', > group '0' > >> > <6>init: Created socket '/dev/socket/rild' with mode '660', user '0', > >> > group '1001' > >> > init: Created socket '/dev/socket/rild' with mode '660', user '0', > group '1001' > >> > <5>init: starting 'media' > >> > init: starting 'media' > >> > <5>init: starting 'dbus' > >> > init: starting 'dbus' > >> > <5>init: starting 'installd' > >> > init: starting 'installd' > >> > <6>init: Created socket '/dev/socket/dbus' with mode '660', user > >> > '1002', group '1002' > >> > init: Created socket '/dev/socket/dbus' with mode '660', user '1002', > >> > group '1002' > >> > <3>init: cannot find '/system/etc/install-recovery.sh', disabling > >> > 'flash_recovery' > >> > init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > >> > <6>init: Created socket '/dev/socket/installd' with mode '600', user > >> > '1000', group '1000' > >> > init: Created socket '/dev/socket/installd' with mode '600', user > >> > '1000', group '1000' > >> > <5>init: starting 'keystore' > >> > init: starting 'keystore' > >> > <5>init: starting 'baseimage' > >> > init: starting 'baseimage' > >> > <6>init: Created socket '/dev/socket/keystore' with mode '666', user > >> > '0', group '0' > >> > init: Created socket '/dev/socket/keystore' with mode '666', user '0', > group '0' > >> > <5>init: starting 'mux' > >> > init: starting 'mux' > >> > <3>init: cannot find '/system/bin/fw3a_core', disabling 'fw3a' > >> > init: cannot find '/system/bin/fw3a_core', disabling 'fw3a' > >> > <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound' > >> > init: cannot find '/system/bin/playmp3', disabling 'bootsound' > >> > <5>init: starting 'uim' > >> > init: starting 'uim' > >> > <6>init: command 'class_start' r=0 > >> > init: command 'class_start' r=0 > >> > <6>init: processing action 0x2d3d8 > (property:persist.service.adb.enable=1) > >> > init: processing action 0x2d3d8 > (property:persist.service.adb.enable=1) > >> > <5>init: starting 'adbd' > >> > init: starting 'adbd' > >> > <6>init: command 'start' r=0 > >> > init: command 'start' r=0 > >> > # <6>init: waitpid returned pid 782, status = 0000ff00 > >> > init: waitpid returned pid 782, status = 0000ff00 > >> > <5>init: process 'baseimage', pid 782 exited > >> > init: process 'baseimage', pid 782 exited > >> > AT > >> > <6>init: waitpid returned pid 784, status = 0000ff00 > >> > init: waitpid returned pid 784, status = 0000ff00 > >> > <5>init: process 'uim', pid 784 exited > >> > init: process 'uim', pid 784 exited > >> > <6>warning: `rild' uses 32-bit capabilities (legacy support in use) > >> > warning: `rild' uses 32-bit capabilities (legacy support in use) > >> > <6>init: waitpid returned pid 776, status = 0000ff00 > >> > init: waitpid returned pid 776, status = 0000ff00 > >> > <5>init: process 'ril-daemon', pid 776 exited > >> > init: process 'ril-daemon', pid 776 exited > >> > <5>init: process 'ril-daemon' killing any children in process group > >> > init: process 'ril-daemon' killing any children in process group > >> > ù à @ùù ïà òùAT > >> > <7>mediaserver: unhandled page fault (11) at 0x00000010, code 0x017 > >> > <1>pgd = dff60000 > >> > pgd = dff60000 > >> > <1>[00000010] *pgd=9ff8a031[00000010] *pgd=9ff8a031, *pte=00000000, > >> > *pte=00000000, *ppte=00000000, *ppte=00000000 > >> > >> > Pid: 778, comm: mediaserver > >> > Pid: 778, > >> > >> ... > >> > >> read more » > > > > -- > > unsubscribe: > > [email protected]<android-porting%[email protected]> > > website: http://groups.google.com/group/android-porting > > > > > > -- > Regards, > Hardik > > "If you are doing what you have always been doing then expect what you > have always been getting." > > -- > unsubscribe: > [email protected]<android-porting%[email protected]> > website: http://groups.google.com/group/android-porting > -- Regards Kiran -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
