> comment this out from wifi.c I modified it according to http://projectkennel.com/wiki/diffs/wifi.html so it's wrong?
On Mar 14, 9:14 pm, Pavan Savoy <[email protected]> wrote: > On Mon, Mar 14, 2011 at 3:00 PM, BiX <[email protected]> wrote: > > Thanks Pavan for the config. > > > WiFi: > > I built wpa_supplicant instead of BOARD_WLAN_TI_STA_DK_ROOT. > > These are the changes I've made: > > 1. Add to BoardConfig.mk: > > BOARD_WPA_SUPPLICANT_DRIVER := WEXT > > 2. Uncommment wpa_supplicant config in external/wpa_supplicant/ > > Android.mk > > 3. Add to init.rc: > > mkdir /system/etc/wifi 0770 wifi wifi > > chmod 0770 /system/etc/wifi > > chmod 0660 /system/etc/wifi/wpa_supplicant.conf > > chown wifi wifi /system/etc/wifi/wpa_supplicant.conf > > #wpa_supplicant control socket for android wifi.c > > mkdir /data/misc/wifi 0770 wifi wifi > > mkdir /data/misc/wifi/sockets 0770 wifi wifi > > chmod 0770 /data/misc/wifi > > chmod 0660 /data/misc/wifi/wpa_supplicant.conf > > chown wifi wifi /data/misc/wifi > > chown wifi wifi /data/misc/wifi/wpa_supplicant.conf > > > However, I still cannot get WiFi on. > > > Logcat: > > I/WifiHW ( 1004): Loading WiFi Modules > > E/WifiHW ( 1004): Cannot find driver rt73usb in proc > > Here you either need to build rt73usb as module or comment this out from > wifi.c > > > > > > > > > > > I/WifiHW ( 1004): insmod > > I/WifiHW ( 1004): insmod > > I/WifiHW ( 1004): insmod > > I/WifiHW ( 1004): start wifi_start_supplicant > > E/WifiHW ( 1004): ensure_config_file_exists > > I/WifiHW ( 1004): Wi-Fi is running > > I/WifiHW ( 1004): wifi_command called, cmd:BLACKLIST clear > > I/WifiHW ( 1004): wifi_send_command, cmd = BLACKLIST clear > > I/WifiHW ( 1004): wifi_connect_to_supplicant called > > I/WifiHW ( 1004): Interface directory = /data/system/wpa_supplicant > > I/WifiHW ( 1004): Interface name = wlan0 > > E/WifiHW ( 1004): Unable to open connection to supplicant on "wlan0": > > No such file or directory > > D/WifiStateTracker( 1004): Reset connections and stopping DHCP > > E/wpa_supplicant( 1391): Failed to read or parse configuration '/ > > system/etc/wifi/wpa_supplicant.conf'. > > problem here - wpa_supplicant.conf not found.... > > > > > > > > > > > I/logwrapper( 1388): /system/bin/wpa_supplicant terminated by > > exit(255) > > D/WifiStateTracker( 1004): Disabling interface > > > Bluetooth: > > I can scan devices! However I cannot seem to pair with them. > > > Logcat: > > D/BluetoothService( 1003): 00:27:13:6D:D5:0C bond state 11 -> 10 (0) > > W/BluetoothService( 1003): setBondState() called to unbond device, but > > reason code is invalid. Overriding reason code with > > BOND_RESULT_REMOVED > > I/BluetoothEventLoop.cpp( 1003): agent_event_filter: Received method > > org.bluez.Agent:Release > > V/BluetoothEventRedirector( 1345): Received > > android.bluetooth.device.action.BOND_STATE_CHANGED > > W/CachedBluetoothDeviceManager( 1345): showUnbondMessage: Not > > displaying any message for reason:9 > > from the earlier messages, the adapter itself doesn't seem to be up, > for example - you can try hciconfig -a - to check the status of adapter. > > > Are there any modifications or modules missing? > > As a general rule - enable Wi-Fi or Bluetooth from command line first > - start using them as in scanning APs or BT devices and then try and > enable them from the UI ... > > > > > > > > > > > Thanks in advance. > > > On Mar 10, 9:30 pm, Pavan Savoy <[email protected]> wrote: > >> On Thu, Mar 10, 2011 at 12:28 PM, BiX <[email protected]> wrote: > >> > Using Gingerbread on OMAP 3530 > > >> > For WiFi: > > >> > 1. Build rt73 as loadable module. > >> > 2. Added BOARD_WLAN_TI_STA_DK_ROOT in BoardConfig.mk to build > >> > wlan_loader. > >> > 3. Placed rt73usb.ko, rt2x00lib.ko & rt2x00usb.ko in /system/lib/ > >> > modules. > >> > 4. Placed rt73.bin in /system/etc/firmware. > > >> > Locat: > >> > I/WifiHW ( 973): Loading WiFi Modules > >> > E/WifiHW ( 973): Cannot find driver rt73usb in proc > >> > I/WifiHW ( 973): insmod > >> > I/WifiHW ( 973): insmod > >> > I/WifiHW ( 973): insmod > >> > D/Tethering( 973): wlan0 is not a tetherable iface, ignoring > >> > E/wlan_loader( 1316): Cannot open eeprom image file > >> > <./nvs_map.bin>: > >> > No such file or directory > >> > E/wlan_loader( 1316): init_driver() failed > >> > I/WifiHW ( 973): rmmod > >> > E/Tethering( 973): attempting to remove unknown iface (wlan0), > >> > ignoring > >> > E/WifiService( 973): Failed to load Wi-Fi driver. > > >> > For Bluetooth: > > >> > 1. Build HCI USB and HCI UART for kernel. > >> > 2. Add to BoardConfig.mk: > >> > BOARD_HAVE_BLUETOOTH := true > >> > 3. Remove from $ANDROID/system/bluetooth/bluedroid/bluetooth.c: > >> > if (set_bluetooth_power(1) < 0) goto out; > > >> > Once Bluetooth is ticked, this message will keep repeating 'E/ > >> > bluetooth_ScoSocket.cpp( 1035): accept_work socket() failed: Protocol > >> > not supported'. > >> > I can scan with hcitool scan but if I try to l2ping, I'll get 'Can't > >> > create socket: Protocol not supported'. > > >> > Logcat: > >> > I/bluedroid( 972): Starting hciattach daemon > >> > I/bluedroid( 972): Starting bluetoothd deamon > >> > E/BluetoothEventLoop.cpp( 972): event_filter: Received signal > >> > org.freedesktop.DBus:NameAcquired from /org/freedesktop/DBus > >> > E/BluetoothEventLoop.cpp( 972): event_filter: Received signal > >> > org.bluez.Adapter:PropertyChanged from /org/bluez/1309/hci0 > >> > D/BluetoothService( 972): Bluetooth state 11 -> 12 > >> > V/BluetoothEventRedirector( 1289): Received > >> > android.bluetooth.adapter.action.STATE_CHANGED > >> > E/BluetoothAudioGateway.cpp( 1035): Can't create RFCOMM socket > >> > E/BT Audio Gateway( 1035): Could not set up listening socket, > >> > exiting > >> > E/bluetooth_ScoSocket.cpp( 1035): accept_work socket() failed: > >> > Protocol not supported > > >> You need to enable these in your kernel, > >> # > >> # Network testing > >> # > >> # CONFIG_NET_PKTGEN is not set > >> # CONFIG_HAMRADIO is not set > >> # CONFIG_CAN is not set > >> # CONFIG_IRDA is not set > >> CONFIG_BT=y > >> CONFIG_BT_L2CAP=y > >> # CONFIG_BT_L2CAP_EXT_FEATURES is not set > >> CONFIG_BT_SCO=y > >> CONFIG_BT_RFCOMM=y > >> CONFIG_BT_RFCOMM_TTY=y > >> # CONFIG_BT_BNEP is not set > >> CONFIG_BT_HIDP=y > > >> > Things added to my init.rc: > > >> > # wifi > >> > mkdir /system/etc/wifi 0770 wifi wifi > >> > chmod 0770 /system/etc/wifi > >> > chmod 0660 /system/etc/wifi/wpa_supplicant.conf > >> > chown wifi wifi /system/etc/wifi/wpa_supplicant.conf > > >> > #bluetooth power up/down interface > >> > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type > >> > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state > >> > chmod 0660 /sys/class/rfkill/rfkill0/state > > >> > setprop wifi.interface wlan0 > >> > setprop wlan.driver.status ok > > >> > service wlan_loader /system/bin/wlan_loader > >> > disabled > >> > oneshot > > >> > service ifcfg_ralink /system/bin/ifconfig wlan0 up > >> > disabled > >> > oneshot > > >> > service wpa_supplicant /system/bin/wpa_supplicant -dd -Dwext -iwlan0 - > >> > c /system/etc/wifi/wpa_supplicant.conf > >> > group system wifi inet > >> > disabled > >> > oneshot > > >> > service dhcpcd /system/bin/logwrapper /system/bin/dhcpcd -d wlan0 > >> > disabled > >> > oneshot > >> > #group system dhcp > > >> > service hciattach /system/bin/hciattach -l > >> > user root > >> > # changing user to root from bluetooth is a potential security issue > >> > # service hciattach_legacy is used instead of hciattach because, we > >> > dont > >> > # have nodes named ttyHS0 > >> > group bluetooth net_bt_admin misc > >> > disabled > >> > oneshot > > >> > on property:init.svc.wpa_supplicant=stopped > >> > stop dhcpcd > > >> > -- > >> > unsubscribe: [email protected] > >> > website:http://groups.google.com/group/android-porting > > >> -- > >> --Pavan Savoy > > > -- > > unsubscribe: [email protected] > > website:http://groups.google.com/group/android-porting > > -- > --Pavan Savoy -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
