There are several possible things: Does the problem happen on outgoing calls as well as incoming calls ( all remote hangup, of course)
If it's only on incoming call, you may need to check if your modem is generating multiple ring indications, i think there is a setting you can use to let the framework know. If it's on all calls, then it may be a network thing, which is not explicitely terminating calls when the remote party hangs up. BT Cellnet used to do that, maybe that still the case on some networks... In all, a set of logs would tell you. M. On 24 March 2011 15:37, animesh arora <[email protected]> wrote: > Now able to recieve and send call,but in both the cases the call timer will > not stop even we will cut the call from other side. > Is there any more service we need to run? > > On Thu, Mar 17, 2011 at 8:25 AM, Maffiou <[email protected]> wrote: >> >> Have you provisioned voice call in your sqlite DB? >> >> In an adb root shell: >> >> $ cd /data/data/com.android.providers.settings/databases >> $ sqlite3 settings.db >> <sqlite> INSERT INTO secure (name, value) VALUES >> ('device_provisioned', 1); >> <sqlite> .exit >> $ reboot >> >> I think that should probably take care of your problem. >> >> m. >> >> On 17 March 2011 15:02, animesh arora <[email protected]> wrote: >> > Its surley supports voice calls,for time beeing i am commenting the >> > AT+CHLD=0,so able to get call continously,but not able to get why >> > incoming >> > call screen is not coming??? >> > >> > Can anybody suggest how we can debug the code for telephony to ril code >> > flow. >> > >> > On Thu, Mar 17, 2011 at 1:13 AM, arindam das <[email protected]> >> > wrote: >> >> >> >> dude..i dnt know which board you are using for testing and it gives you >> >> any port to debug android ril realtime or not.... >> >> but im pretty much sure you have to start getting accustomed with logs >> >> for >> >> debugging >> >> >> >> On Wed, Mar 16, 2011 at 9:35 PM, animesh arora >> >> <[email protected]> >> >> wrote: >> >>> >> >>> That only i am not getting.Log only is not helpful to debug.Need >> >>> inside >> >>> technical solution how we can do it. >> >>> Have anybody debuged these type for problems for RIL????? >> >>> >> >>> On Wed, Mar 16, 2011 at 9:00 AM, arindam das <[email protected]> >> >>> wrote: >> >>>> >> >>>> collect one log...will be interesting to see how telephony framework >> >>>> can >> >>>> reject a call automaticaly....my hunch is its getting any unsol >> >>>> indication >> >>>> from the modem. >> >>>> >> >>>> >> >>>> ima afraid that logs are the only possible way to debug. :( >> >>>> >> >>>> -ari >> >>>> >> >>>> On Wed, Mar 16, 2011 at 8:58 PM, animesh arora >> >>>> <[email protected]> wrote: >> >>>>> >> >>>>> Call is automatically droping whenever i am trying to call that >> >>>>> no.after 2 rings.its automatically using AT+CHLD=0,and droping the >> >>>>> call.Not >> >>>>> able to find why it is going automatically in that case of >> >>>>> reference-ril. >> >>>>> >> >>>>> Can anyone suggest how we can check the flow for these type of >> >>>>> Unsollicited calls like incoming call,incoming SMS.Is there any >> >>>>> proper way >> >>>>> to check it.And how it is communicating through JNI/JAVA for these >> >>>>> UNSOLICITED calls.i know it is using socket,but is there any >> >>>>> procedure to >> >>>>> check this flow,and where we are strucking. >> >>>>> >> >>>>> Please let me know any type of Debugger also for target debugging >> >>>>> for >> >>>>> RIL. >> >>>>> >> >>>>> Regards >> >>>>> >> >>>>> ANI. >> >>>>> >> >>>>> On Tue, Mar 8, 2011 at 2:42 AM, arindam das <[email protected]> >> >>>>> wrote: >> >>>>>> >> >>>>>> SIM_IO is used for reading writing to sim e.g. MS-ISDN list,reading >> >>>>>> writing SMSC number,reading writing sim contacts,try to capture >> >>>>>> some >> >>>>>> logs..without which it will very difficult to suggest anything >> >>>>>> >> >>>>>> On Mon, Mar 7, 2011 at 3:00 PM, animesh arora >> >>>>>> <[email protected]> wrote: >> >>>>>>> >> >>>>>>> Now i able to make a call with my device no. after commenting >> >>>>>>> SIM_IO >> >>>>>>> functionality,but i am not able to recieve the call, if i am >> >>>>>>> calling through >> >>>>>>> my mobile to that device no..only 2 rings are going after that >> >>>>>>> call is >> >>>>>>> droping out. >> >>>>>>> What may be the issue. >> >>>>>>> What will be the uses of SIM_IO functionality,which i commented,is >> >>>>>>> it >> >>>>>>> useful for recieving the call???? >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> >> >>>>>>> ANI. >> >>>>>>> >> >>>>>>> On Fri, Mar 4, 2011 at 7:07 PM, arindam das <[email protected]> >> >>>>>>> wrote: >> >>>>>>>> >> >>>>>>>> JAVA logs are coming by default but not the refernce ril log. >> >>>>>>>> >> >>>>>>>> go to hardware/ril/reference-ril.c >> >>>>>>>> >> >>>>>>>> and check log_tag is defined or not?? >> >>>>>>>> If in this file LOG_TAG is defined something other than >> >>>>>>>> "RIL",then u >> >>>>>>>> have to give >> >>>>>>>> logcat-b radio&logcat& to get log >> >>>>>>>> >> >>>>>>>> similarly in same path u can check for the at parser files for >> >>>>>>>> the >> >>>>>>>> logs. >> >>>>>>>> >> >>>>>>>> I presume due to some at commands ur modem is hanging and nothing >> >>>>>>>> proceeds... >> >>>>>>>> >> >>>>>>>> On Fri, Mar 4, 2011 at 6:27 PM, animesh arora >> >>>>>>>> <[email protected]> wrote: >> >>>>>>>>> >> >>>>>>>>> where we can enable AT log message by default it is coming for >> >>>>>>>>> RIL >> >>>>>>>>> layer,i dont know where we can enable for JAVA layer which i am >> >>>>>>>>> getting >> >>>>>>>>> after pressing the call button. >> >>>>>>>>> On Fri, Mar 4, 2011 at 6:04 PM, arindam das >> >>>>>>>>> <[email protected]> >> >>>>>>>>> wrote: >> >>>>>>>>>> >> >>>>>>>>>> animesh, >> >>>>>>>>>> i could not see any AT log ....please enable the logs first and >> >>>>>>>>>> collect one >> >>>>>>>>>> >> >>>>>>>>>> second thing is comment out sim_io >> >>>>>>>>>> >> >>>>>>>>>> >> >>>>>>>>>> >> >>>>>>>>>> On Fri, Mar 4, 2011 at 5:58 PM, animesh arora >> >>>>>>>>>> <[email protected]> wrote: >> >>>>>>>>>>> >> >>>>>>>>>>> Hi Arrin/Moffiou >> >>>>>>>>>>> >> >>>>>>>>>>> Please tell me clearly i what i need to comment out,are you >> >>>>>>>>>>> telling about to comment out the particular SIMIO related AT >> >>>>>>>>>>> Command. >> >>>>>>>>>>> >> >>>>>>>>>>> Tell me is there possiblity of blocking GSM AT interfaced >> >>>>>>>>>>> channel,so i am not able to call.If yes tell me how we can >> >>>>>>>>>>> test it out >> >>>>>>>>>>> wheather it is got blocked or not? >> >>>>>>>>>>> >> >>>>>>>>>>> Is there any procedure to test it out? >> >>>>>>>>>>> >> >>>>>>>>>>> Regards >> >>>>>>>>>>> >> >>>>>>>>>>> ANI >> >>>>>>>>>>> >> >>>>>>>>>>> On Fri, Mar 4, 2011 at 12:08 PM, arindam das >> >>>>>>>>>>> <[email protected]> wrote: >> >>>>>>>>>>>> >> >>>>>>>>>>>> Hi Animesh, >> >>>>>>>>>>>> I can see in ur log >> >>>>>>>>>>>> D/RILJ ( 1748): [0067]> DIAL >> >>>>>>>>>>>> >> >>>>>>>>>>>> but it didnt result to any AT command(hoping that the IPC >> >>>>>>>>>>>> mechanism is AT). >> >>>>>>>>>>>> >> >>>>>>>>>>>> No log is coming from reference-ril.so(or whatever logtag you >> >>>>>>>>>>>> ahve given in reference-ril.c code) >> >>>>>>>>>>>> >> >>>>>>>>>>>> Please check first those logs are enabled or not...may be >> >>>>>>>>>>>> something is failing from there itself. >> >>>>>>>>>>>> >> >>>>>>>>>>>> And I totally agree with maffiou,comment out the >> >>>>>>>>>>>> SIM_IO(at+crsm >> >>>>>>>>>>>> calls) request from your ril code and check whether it >> >>>>>>>>>>>> proceeds with the MO >> >>>>>>>>>>>> call or not >> >>>>>>>>>>>> >> >>>>>>>>>>>> >> >>>>>>>>>>>> On Fri, Mar 4, 2011 at 11:50 AM, animesh arora >> >>>>>>>>>>>> <[email protected]> wrote: >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> Hi >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> Find the latest log for Making GSM call with the help of >> >>>>>>>>>>>>> dialer >> >>>>>>>>>>>>> in android. >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> Help me out for it i am getting this message after making a >> >>>>>>>>>>>>> call through dialer,is there any solution to make a call.Is >> >>>>>>>>>>>>> the log is >> >>>>>>>>>>>>> proper which i am getting after dial up a mobile no.??? >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> # I/ActivityManager( 1650): Starting activity: Intent { >> >>>>>>>>>>>>> action=android.intent.action.MAIN >> >>>>>>>>>>>>> categories={android.intent.category.LAUNCHER} >> >>>>>>>>>>>>> flags=0x10200000 >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> comp={com.android.contacts/com.android.contacts.DialtactsActivity} >> >>>>>>>>>>>>> } >> >>>>>>>>>>>>> I/ActivityManager( 1650): Displayed activity >> >>>>>>>>>>>>> com.android.contacts/.DialtactsActivity: 8688 ms >> >>>>>>>>>>>>> I/ActivityManager( 1650): Starting activity: Intent { >> >>>>>>>>>>>>> action=android.intent.action.CALL_PRIVILEGED data=tel:(ANY >> >>>>>>>>>>>>> PHONE >> >>>>>>>>>>>>> NO>)flags=0x10000000 >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> comp={com.android.phone/com.android.phone.PrivilegedOutgoingCallBroadcaster} >> >>>>>>>>>>>>> } >> >>>>>>>>>>>>> I/ActivityManager( 1650): Starting activity: Intent { >> >>>>>>>>>>>>> action=android.intent.action.CALL data=tel:988-406-0406 >> >>>>>>>>>>>>> flags=0x10000000 >> >>>>>>>>>>>>> comp={com.android.phone/com.android.phone.InCallScreen} (has >> >>>>>>>>>>>>> extras) } >> >>>>>>>>>>>>> D/GSM ( 1748): [GSMConn] acquireWakeLock >> >>>>>>>>>>>>> D/RILJ ( 1748): [0066]> SET_MUTE false >> >>>>>>>>>>>>> D/RILJ ( 1748): [0067]> DIAL >> >>>>>>>>>>>>> I/AudioHardwareLittleton( 1623): >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> *************************AudioHardwareMarvell::setMode(2)*************************** >> >>>>>>>>>>>>> request_suspend_state: wakeup (0->0) at 3920133668884 >> >>>>>>>>>>>>> (1970-01-01 01:05:20.133668884 UTC) >> >>>>>>>>>>>>> W/PowerManagerService( 1650): mDimDelay=-1 while trying to >> >>>>>>>>>>>>> dim >> >>>>>>>>>>>>> W/NotificationService( 1650): STOP command without a player >> >>>>>>>>>>>>> D/RILJ ( 1748): [0068]> SET_MUTE false >> >>>>>>>>>>>>> request_suspend_state: sleep (0->3) at 3920959810233 >> >>>>>>>>>>>>> (1970-01-01 01:05:20.959779716 UTC) >> >>>>>>>>>>>>> W/ActivityManager( 1650): Activity pause timeout for >> >>>>>>>>>>>>> HistoryRecord{4379e248 >> >>>>>>>>>>>>> {com.android.phone/com.android.phone.InCallScreen}} >> >>>>>>>>>>>>> stop_drawing_early_suspend: timeout waiting for userspace to >> >>>>>>>>>>>>> stop drawing >> >>>>>>>>>>>>> W/ActivityManager( 1650): Activity idle timeout for >> >>>>>>>>>>>>> HistoryRecord{43853cc0 >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> {com.android.phone/com.android.phone.PrivilegedOutgoingCallBroadcaster}} >> >>>>>>>>>>>>> D/dalvikvm( 1650): GC freed 4936 objects / 289256 bytes in >> >>>>>>>>>>>>> 1650ms >> >>>>>>>>>>>>> W/ActivityManager( 1650): Activity idle timeout for >> >>>>>>>>>>>>> HistoryRecord{4379e248 >> >>>>>>>>>>>>> {com.android.phone/com.android.phone.InCallScreen}} >> >>>>>>>>>>>>> D/RILJ ( 1748): WAKE_LOCK_TIMEOUT mReqPending=0 >> >>>>>>>>>>>>> mRequestList=23 >> >>>>>>>>>>>>> D/RILJ ( 1748): 0: [36] SET_NETWORK_SELECTION_AUTOMATIC >> >>>>>>>>>>>>> D/RILJ ( 1748): 1: [47] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 2: [48] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 3: [49] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 4: [50] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 5: [51] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 6: [52] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 7: [53] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 8: [54] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 9: [55] GET_SIM_STATUS >> >>>>>>>>>>>>> D/RILJ ( 1748): 10: [56] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 11: [57] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 12: [58] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 13: [59] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 14: [60] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 15: [61] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 16: [62] REQUEST_GET_NEIGHBORING_CELL_IDS >> >>>>>>>>>>>>> D/RILJ ( 1748): 17: [63] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 18: [64] SIGNAL_STRENGTH >> >>>>>>>>>>>>> D/RILJ ( 1748): 19: [65] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 20: [66] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 21: [67] DIAL >> >>>>>>>>>>>>> D/RILJ ( 1748): 22: [68] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): [0069]> SET_MUTE false >> >>>>>>>>>>>>> D/RILJ ( 1748): [0070]> SET_MUTE false >> >>>>>>>>>>>>> select 1854 (app_process), adj 15, size 4005, to kill >> >>>>>>>>>>>>> send sigkill to 1854 (app_process), adj 15, size 4005 >> >>>>>>>>>>>>> I/ActivityManager( 1650): Process com.android.settings (pid >> >>>>>>>>>>>>> 1854) has died. >> >>>>>>>>>>>>> D/RILJ ( 1748): [0071]> DTMF_STOP >> >>>>>>>>>>>>> I/ActivityManager( 1650): Low Memory: No more background >> >>>>>>>>>>>>> processes. >> >>>>>>>>>>>>> W/ActivityManager( 1650): Activity pause timeout for >> >>>>>>>>>>>>> HistoryRecord{4379e248 >> >>>>>>>>>>>>> {com.android.phone/com.android.phone.InCallScreen}} >> >>>>>>>>>>>>> D/dalvikvm( 1753): GC freed 2455 objects / 121888 bytes in >> >>>>>>>>>>>>> 2357ms >> >>>>>>>>>>>>> D/dalvikvm( 1650): GC freed 3303 objects / 352520 bytes in >> >>>>>>>>>>>>> 1966ms >> >>>>>>>>>>>>> D/RILJ ( 1748): WAKE_LOCK_TIMEOUT mReqPending=0 >> >>>>>>>>>>>>> mRequestList=26 >> >>>>>>>>>>>>> D/RILJ ( 1748): 0: [36] SET_NETWORK_SELECTION_AUTOMATIC >> >>>>>>>>>>>>> D/RILJ ( 1748): 1: [47] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 2: [48] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 3: [49] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 4: [50] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 5: [51] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 6: [52] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 7: [53] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 8: [54] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 9: [55] GET_SIM_STATUS >> >>>>>>>>>>>>> D/RILJ ( 1748): 10: [56] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 11: [57] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 12: [58] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 13: [59] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 14: [60] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 15: [61] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 16: [62] REQUEST_GET_NEIGHBORING_CELL_IDS >> >>>>>>>>>>>>> D/RILJ ( 1748): 17: [63] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 18: [64] SIGNAL_STRENGTH >> >>>>>>>>>>>>> D/RILJ ( 1748): 19: [65] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 20: [66] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 21: [67] DIAL >> >>>>>>>>>>>>> D/RILJ ( 1748): 22: [68] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 23: [69] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 24: [70] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 25: [71] DTMF_STOP >> >>>>>>>>>>>>> I/ActivityManager( 1650): Displayed activity >> >>>>>>>>>>>>> com.android.phone/.InCallScreen: 21628 ms >> >>>>>>>>>>>>> D/RILJ ( 1748): [0072]> DTMF_STOP >> >>>>>>>>>>>>> D/dalvikvm( 1748): GC freed 2277 objects / 141480 bytes in >> >>>>>>>>>>>>> 1504ms >> >>>>>>>>>>>>> D/RILJ ( 1748): [0073]> SCREEN_STATE: false >> >>>>>>>>>>>>> D/RILJ ( 1748): [0074]> SET_MUTE false >> >>>>>>>>>>>>> D/GSM ( 1748): [DataConnection] Stop poll NetStat >> >>>>>>>>>>>>> W/ActivityManager( 1650): Activity idle timeout for >> >>>>>>>>>>>>> HistoryRecord{4379e248 >> >>>>>>>>>>>>> {com.android.phone/com.android.phone.InCallScreen}} >> >>>>>>>>>>>>> D/RILJ ( 1748): WAKE_LOCK_TIMEOUT mReqPending=0 >> >>>>>>>>>>>>> mRequestList=29 >> >>>>>>>>>>>>> D/RILJ ( 1748): 0: [36] SET_NETWORK_SELECTION_AUTOMATIC >> >>>>>>>>>>>>> D/RILJ ( 1748): 1: [47] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 2: [48] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 3: [49] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 4: [50] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 5: [51] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 6: [52] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 7: [53] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 8: [54] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 9: [55] GET_SIM_STATUS >> >>>>>>>>>>>>> D/RILJ ( 1748): 10: [56] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 11: [57] QUERY_FACILITY_LOCK >> >>>>>>>>>>>>> D/RILJ ( 1748): 12: [58] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 13: [59] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 14: [60] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 15: [61] SIM_IO >> >>>>>>>>>>>>> D/RILJ ( 1748): 16: [62] REQUEST_GET_NEIGHBORING_CELL_IDS >> >>>>>>>>>>>>> D/RILJ ( 1748): 17: [63] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 18: [64] SIGNAL_STRENGTH >> >>>>>>>>>>>>> D/RILJ ( 1748): 19: [65] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 20: [66] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 21: [67] DIAL >> >>>>>>>>>>>>> D/RILJ ( 1748): 22: [68] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 23: [69] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 24: [70] SET_MUTE >> >>>>>>>>>>>>> D/RILJ ( 1748): 25: [71] DTMF_STOP >> >>>>>>>>>>>>> D/RILJ ( 1748): 26: [72] DTMF_STOP >> >>>>>>>>>>>>> D/RILJ ( 1748): 27: [73] SCREEN_STATE >> >>>>>>>>>>>>> D/RILJ ( 1748): 28: [74] SET_MUTE >> >>>>>>>>>>>>> D/dalvikvm( 1753): GC freed 475 objects / 17720 bytes in >> >>>>>>>>>>>>> 2359ms >> >>>>>>>>>>>>> request_suspend_state: wakeup (3->0) at 3977003267267 >> >>>>>>>>>>>>> (1970-01-01 01:06:17.003267267 UTC) >> >>>>>>>>>>>>> request_suspend_state: wakeup (0->0) at 3977573701840 >> >>>>>>>>>>>>> (1970-01-01 01:06:17.573701840 UTC) >> >>>>>>>>>>>>> D/RILJ ( 1748): [0075]> SET_MUTE false >> >>>>>>>>>>>>> D/RILJ ( 1748): [0076]> SCREEN_STATE: true >> >>>>>>>>>>>>> W/KeyCharacterMap( 1748): No keyboard for id 0 >> >>>>>>>>>>>>> W/KeyCharacterMap( 1748): Using default keymap: >> >>>>>>>>>>>>> /system/usr/keychars/qwerty.kcm.bin >> >>>>>>>>>>>>> D/GSM ( 1748): [DataConnection] Stop poll NetStat >> >>>>>>>>>>>>> I/ActivityManager( 1650): moveTaskToBack: 7 >> >>>>>>>>>>>>> D/RILJ ( 1748): [0077]> DTMF_STOP >> >>>>>>>>>>>>> D/RILJ ( 1748): [0078]> DTMF_STOP >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> On Thu, Mar 3, 2011 at 8:48 PM, Maffiou <[email protected]> >> >>>>>>>>>>>>> wrote: >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> From what I can tell, your log doesn't reach a point where >> >>>>>>>>>>>>>> it >> >>>>>>>>>>>>>> is >> >>>>>>>>>>>>>> trying to make a call. You seem to have some issue much >> >>>>>>>>>>>>>> before >> >>>>>>>>>>>>>> that >> >>>>>>>>>>>>>> point. And from what I can tell, it's definitely RIL/Modem >> >>>>>>>>>>>>>> level, not >> >>>>>>>>>>>>>> likely anything to do with the rest of the android SW. >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> It would be interesting to see how long it takes for all >> >>>>>>>>>>>>>> those >> >>>>>>>>>>>>>> SIM >> >>>>>>>>>>>>>> request to be processed, there are quite a few piled up and >> >>>>>>>>>>>>>> you seem >> >>>>>>>>>>>>>> to get stuck while processing one of those. Maybe adding >> >>>>>>>>>>>>>> "-v >> >>>>>>>>>>>>>> time" >> >>>>>>>>>>>>>> when capturing the logcat can show some relevant >> >>>>>>>>>>>>>> information. >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> I don't think the sim io's are essential, so I would shunt >> >>>>>>>>>>>>>> these >> >>>>>>>>>>>>>> temporarily and see if that improves things as first step. >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> Cheers. >> >>>>>>>>>>>>>> M. >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> On Mar 2, 4:05 pm, animesh arora >> >>>>>>>>>>>>>> <[email protected]> >> >>>>>>>>>>>>>> wrote: >> >>>>>>>>>>>>>> > I already shared the complete log with the first post >> >>>>>>>>>>>>>> > itself? >> >>>>>>>>>>>>>> > is there anyway to check the baudrate after boots up of >> >>>>>>>>>>>>>> > android? >> >>>>>>>>>>>>>> > What is exactly happen while calling through dialer >> >>>>>>>>>>>>>> > inside >> >>>>>>>>>>>>>> > the complete >> >>>>>>>>>>>>>> > android stack. >> >>>>>>>>>>>>>> > Because when i am calling dialing screen i am able to >> >>>>>>>>>>>>>> > see,but i am not able >> >>>>>>>>>>>>>> > to get call at other side. >> >>>>>>>>>>>>>> > is there anyway for debugging complete stack after dial >> >>>>>>>>>>>>>> > the >> >>>>>>>>>>>>>> > no. through >> >>>>>>>>>>>>>> > dialer???? >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > Regards >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > ANI >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > On Tue, Feb 22, 2011 at 1:23 PM, Rajesh Kadhiravan >> >>>>>>>>>>>>>> > Nagaiah < >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > [email protected]> wrote: >> >>>>>>>>>>>>>> > > Hi, >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > > That TE character set AT command was just an example, >> >>>>>>>>>>>>>> > > but >> >>>>>>>>>>>>>> > > anyways thats not >> >>>>>>>>>>>>>> > > blocking it because as it returned ERROR immediately. >> >>>>>>>>>>>>>> > > Can you share both the Apps side logs and the Ril logs >> >>>>>>>>>>>>>> > > ? >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > > BR, >> >>>>>>>>>>>>>> > > Rajesh >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > > On Tue, Feb 22, 2011 at 8:41 AM, animesh arora >> >>>>>>>>>>>>>> > > <[email protected]>wrote: >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> Hi >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> i applied AT+CSCS=\"UCS2\"", NULL); >> >>>>>>>>>>>>>> > >> than also i am just getting dialing screen,but other >> >>>>>>>>>>>>>> > >> side >> >>>>>>>>>>>>>> > >> i am not able to >> >>>>>>>>>>>>>> > >> receive call. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> But i think AT channel is responding because by >> >>>>>>>>>>>>>> > >> standalone c program i am >> >>>>>>>>>>>>>> > >> able to call after booting of android. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> is there any possibility of java application side some >> >>>>>>>>>>>>>> > >> calls are missing >> >>>>>>>>>>>>>> > >> in android cupcake version?? >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> Suggest me how to solve this problem? >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> Regards >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> ANI >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> On Sat, Feb 19, 2011 at 10:16 AM, animesh arora < >> >>>>>>>>>>>>>> > >> [email protected]> wrote: >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>> Ok Thanks i will try out it. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>> Regards >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>> ANI. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>> On Fri, Feb 18, 2011 at 6:54 AM, Hamilton Vera < >> >>>>>>>>>>>>>> > >>> [email protected]> wrote: >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> It looks like your modem does not support some AT >> >>>>>>>>>>>>>> > >>>> commands like " >> >>>>>>>>>>>>>> > >>>> AT+CSCS="HEX". >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> Make sure that these commands are not locking the >> >>>>>>>>>>>>>> > >>>> device. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> Try out some alternatives like >> >>>>>>>>>>>>>> > >>>> at_send_command("AT+CSCS=\"UCS2\"", >> >>>>>>>>>>>>>> > >>>> NULL); >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> []'s >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> Hamilton Vera >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> On Mon, Feb 14, 2011 at 2:36 PM, animesh arora >> >>>>>>>>>>>>>> > >>>> <[email protected]> wrote: >> >>>>>>>>>>>>>> > >>>> > Hi >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > am facing the problem while maiking GSM call. >> >>>>>>>>>>>>>> > >>>> > I followed the link which i got from the below >> >>>>>>>>>>>>>> > >>>> > link. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> >> >>>>>>>>>>>>>> > >>>> >>>> >>>>https://groups.google.com/group/android-porting/browse_thread/thread/... >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > And getting the below message after running logcat >> >>>>>>>>>>>>>> > >>>> > -b >> >>>>>>>>>>>>>> > >>>> > radio on the >> >>>>>>>>>>>>>> > >>>> device >> >>>>>>>>>>>>>> > >>>> > with cupcake version. >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > is there any problem which i am getting in my log >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > E/RILC ( 1750): 1:Failed to get socket 'rild' >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > because firstly rild was connected only later it >> >>>>>>>>>>>>>> > >>>> > is >> >>>>>>>>>>>>>> > >>>> > showing failed, >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > what is the problem for making call? >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > # logcat -b radio & >> >>>>>>>>>>>>>> > >>>> > # I/RIL ( 1621): Opening tty device >> >>>>>>>>>>>>>> > >>>> > /dev/ttyUSB0 >> >>>>>>>>>>>>>> > >>>> > I/RILC ( 1621): libril: new connection >> >>>>>>>>>>>>>> > >>>> > I/RILC ( 1621): RIL Daemon version: android >> >>>>>>>>>>>>>> > >>>> > reference-ril 1.0 >> >>>>>>>>>>>>>> > >>>> > I/RILJ ( 1676): Connected to 'rild' socket >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [UNSL]< >> >>>>>>>>>>>>>> > >>>> > UNSOL_RESPONSE_RADIO_STATE_CHANGED >> >>>>>>>>>>>>>> > >>>> > RADIO_UNAVAILABLE >> >>>>>>>>>>>>>> > >>>> > W/GSM ( 1676): Can't open >> >>>>>>>>>>>>>> > >>>> > /system/etc/voicemail-conf.xml >> >>>>>>>>>>>>>> > >>>> > W/GSM ( 1676): Can't open >> >>>>>>>>>>>>>> > >>>> > /system/etc/spn-conf.xml >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DSAC DEB] >> >>>>>>>>>>>>>> > >>>> > registerForPsRestrictedEnabled >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DSAC DEB] >> >>>>>>>>>>>>>> > >>>> > registerForPsRestrictedDisabled >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0000]> GET_CURRENT_CALLS >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: GET_CURRENT_CALLS >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0000]< GET_CURRENT_CALLS >> >>>>>>>>>>>>>> > >>>> > error: >> >>>>>>>>>>>>>> > >>>> > >> >>>>>>>>>>>>>> > >>>> > com.android.internal.telephony.gsm.CommandException: >> >>>>>>>>>>>>>> > >>>> RADIO_NOT_AVAILABLE >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): Poll ServiceState done: >> >>>>>>>>>>>>>> > >>>> > oldSS=[1 >> >>>>>>>>>>>>>> > >>>> > home null null >> >>>>>>>>>>>>>> > >>>> null ] >> >>>>>>>>>>>>>> > >>>> > newSS=[1 home null null null ] oldGprs=1 newGprs=1 >> >>>>>>>>>>>>>> > >>>> > oldType=unknown >> >>>>>>>>>>>>>> > >>>> > newType=unknown >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnectionTracker] Radio >> >>>>>>>>>>>>>> > >>>> > is >> >>>>>>>>>>>>>> > >>>> > off and clean up >> >>>>>>>>>>>>>> > >>>> all >> >>>>>>>>>>>>>> > >>>> > connection >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnectionTracker] Clean >> >>>>>>>>>>>>>> > >>>> > up >> >>>>>>>>>>>>>> > >>>> > connection due to >> >>>>>>>>>>>>>> > >>>> > radioTurnedOff >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnection] Stop poll >> >>>>>>>>>>>>>> > >>>> > NetStat >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnectionTracker] >> >>>>>>>>>>>>>> > >>>> > setState: >> >>>>>>>>>>>>>> > >>>> > IDLE >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnection] Stop poll >> >>>>>>>>>>>>>> > >>>> > NetStat >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnectionTracker] >> >>>>>>>>>>>>>> > >>>> > ***trySetupData due to >> >>>>>>>>>>>>>> > >>>> roamingOff >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DSAC DEB] trySetupData with >> >>>>>>>>>>>>>> > >>>> > mIsPsRestricted=false >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [DataConnectionTracker] >> >>>>>>>>>>>>>> > >>>> > trySetupData: Not ready for >> >>>>>>>>>>>>>> > >>>> > data: dataState=IDLE gprsState=1 sim=false >> >>>>>>>>>>>>>> > >>>> > UMTS=false phoneState=IDLE >> >>>>>>>>>>>>>> > >>>> > dataEnabled=true roaming=false >> >>>>>>>>>>>>>> > >>>> > dataOnRoamingEnable=false ps >> >>>>>>>>>>>>>> > >>>> restricted=false >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): [GsmSimCard] Broadcasting >> >>>>>>>>>>>>>> > >>>> > intent >> >>>>>>>>>>>>>> > >>>> SIM_STATE_CHANGED_ACTION >> >>>>>>>>>>>>>> > >>>> > NOT_READY reason null >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0001]> RADIO_POWER >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): Notifying: radio available >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0002]> SCREEN_STATE: true >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> ATE0Q0V1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< ATE0Q0V1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): Poll ServiceState done: >> >>>>>>>>>>>>>> > >>>> > oldSS=[1 >> >>>>>>>>>>>>>> > >>>> > home null null >> >>>>>>>>>>>>>> > >>>> null ] >> >>>>>>>>>>>>>> > >>>> > newSS=[3 home null null null ] oldGprs=1 newGprs=1 >> >>>>>>>>>>>>>> > >>>> > oldType=unknown >> >>>>>>>>>>>>>> > >>>> > newType=unknown >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [UNSL]< >> >>>>>>>>>>>>>> > >>>> > UNSOL_RESPONSE_RADIO_STATE_CHANGED >> >>>>>>>>>>>>>> > >>>> RADIO_OFF >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> ATE0Q0V1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< 0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< 4 >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0003]> BASEBAND_VERSION >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0004]> GET_IMEI >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0005]> GET_IMEISV >> >>>>>>>>>>>>>> > >>>> > I/RIL ( 1750): Opening tty device /dev/ttyUSB0 >> >>>>>>>>>>>>>> > >>>> > W/RILC ( 1750): RIL_onUnsolicitedResponse >> >>>>>>>>>>>>>> > >>>> > called >> >>>>>>>>>>>>>> > >>>> > before >> >>>>>>>>>>>>>> > >>>> RIL_register >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1750): AT> ATE0Q0V1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> ATS0=0 >> >>>>>>>>>>>>>> > >>>> > E/RILC ( 1750): 1:Failed to get socket 'rild' >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CMEE=1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CREG=2 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CGREG=1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CCWA=1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CMOD=0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CMUT=0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CMUT: >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CSSN=0,1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+COLP=0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CSCS="HEX" >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< ERROR >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CUSD=1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CGEREP=1,0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CMGF=0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CFUN? >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CFUN: 1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): Notifying: Radio On >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [UNSL]< >> >>>>>>>>>>>>>> > >>>> > UNSOL_RESPONSE_RADIO_STATE_CHANGED >> >>>>>>>>>>>>>> > >>>> SIM_NOT_READY >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0006]> OPERATOR >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0007]> GPRS_REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CPIN? >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CPIN: READY >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/GSM ( 1676): Notifying: SIM ready >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [UNSL]< >> >>>>>>>>>>>>>> > >>>> > UNSOL_RESPONSE_RADIO_STATE_CHANGED >> >>>>>>>>>>>>>> > >>>> SIM_READY >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CSMS=1 >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0008]> REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CSMS: 1,1,1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CNMI=1,2,2,1,1 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: RADIO_POWER >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0001]< RADIO_POWER >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: SCREEN_STATE >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0009]> >> >>>>>>>>>>>>>> > >>>> > QUERY_NETWORK_SELECTION_MODE >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0002]< SCREEN_STATE error: >> >>>>>>>>>>>>>> > >>>> > >> >>>>>>>>>>>>>> > >>>> > com.android.internal.telephony.gsm.CommandException: >> >>>>>>>>>>>>>> > >>>> REQUEST_NOT_SUPPORTED >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: BASEBAND_VERSION >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: GET_IMEI >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CGSN >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< 352679010163850 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: GET_IMEISV >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: OPERATOR >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> >> >>>>>>>>>>>>>> > >>>> AT+COPS=3,0;+COPS?;+COPS=3,1;+COPS?;+COPS=3,2;+COPS? >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0003]< BASEBAND_VERSION error: >> >>>>>>>>>>>>>> > >>>> > >> >>>>>>>>>>>>>> > >>>> > com.android.internal.telephony.gsm.CommandException: >> >>>>>>>>>>>>>> > >>>> REQUEST_NOT_SUPPORTED >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0004]< GET_IMEI >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0010]> GET_CURRENT_CALLS >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,0,"AirTel",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,1,"AirTel",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,2,"40440",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: >> >>>>>>>>>>>>>> > >>>> > GPRS_REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CGREG? >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CGREG: 1,1,1F54,1DE3 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0005]< GET_IMEISV error: >> >>>>>>>>>>>>>> > >>>> > >> >>>>>>>>>>>>>> > >>>> > com.android.internal.telephony.gsm.CommandException: >> >>>>>>>>>>>>>> > >>>> REQUEST_NOT_SUPPORTED >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0011]> OPERATOR >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CREG? >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +CREG: 2,1,1F54,1DE3 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: >> >>>>>>>>>>>>>> > >>>> > QUERY_NETWORK_SELECTION_MODE >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+COPS? >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0006]< OPERATOR {AirTel, >> >>>>>>>>>>>>>> > >>>> > AirTel, >> >>>>>>>>>>>>>> > >>>> > 40440} >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0012]> GPRS_REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,2,"40440",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: GET_CURRENT_CALLS >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> AT+CLCC >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RIL ( 1621): onRequest: OPERATOR >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT> >> >>>>>>>>>>>>>> > >>>> AT+COPS=3,0;+COPS?;+COPS=3,1;+COPS?;+COPS=3,2;+COPS? >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,0,"AirTel",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,1,"AirTel",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< +COPS: 0,2,"40440",0 >> >>>>>>>>>>>>>> > >>>> > D/AT ( 1621): AT< OK >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( 1676): [0007]< GPRS_REGISTRATION_STATE >> >>>>>>>>>>>>>> > >>>> > {1, 8020, 7651} >> >>>>>>>>>>>>>> > >>>> > D/RILJ ( >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > ... >> >>>>>>>>>>>>>> > >> >>>>>>>>>>>>>> > read more » >> >>>>>>>>>>>>>> >> >>>>>>>>>>>>>> -- >> >>>>>>>>>>>>>> unsubscribe: [email protected] >> >>>>>>>>>>>>>> website: http://groups.google.com/group/android-porting >> >>>>>>>>>>>>> >> >>>>>>>>>>>>> -- >> >>>>>>>>>>>>> unsubscribe: [email protected] >> >>>>>>>>>>>>> website: http://groups.google.com/group/android-porting >> >>>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>> >> >>>>>>>>> >> >>>>>>>> >> >>>>>>> >> >>>>>> >> >>>>> >> >>>> >> >>> >> >> >> > >> > > > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
