Hi All,
I am trying to port Android my ARM platform(s5pv210). And just got a problem
that my platform boot getting into a forever "ANIDROID" animation
loop. There is a flashing "ANDROID" animation in my LCD screen. And
never get into Android home screen. And the logcat message is listed
as follows:
# logcat
# IIS Audio: 16Bits Stereo 44100Hz
--------- beginning of /dev/log/main
I/DEBUG ( 2020): debuggerd: Apr 26 2011 11:49:25
I/Netd ( 2019): Netd 1.0 starting
--------- beginning of /dev/log/system
I/Vold ( 2018): Vold 2.1 (the revenge) firing up
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
E/ ( 2015): [info] pvrsrvinit success
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/AndroidRuntime( 2022):
D/AndroidRuntime( 2022): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 2022): CheckJNI is ON
D/dalvikvm( 2022): creating instr width table
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/ ( 2023): ServiceManager: 0xacd0
D/AudioHardwareALSA( 2023): Mixer: element name: 'DAC1'
D/AudioHardwareALSA( 2023): Mixer: element name: 'DAC2'
D/AudioHardwareALSA( 2023): Mixer: element name: 'DAC3'
D/AudioHardwareALSA( 2023): Mixer: master 'PCM' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Earpiece' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Speaker' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Bluetooth' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Headphone' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Bluetooth A2DP' not found.
D/AudioHardwareALSA( 2023): Mixer: master 'Capture' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Capture' not found.
D/AudioHardwareALSA( 2023): Mixer: route '' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Bluetooth Capture' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Capture' not found.
D/AudioHardwareALSA( 2023): Mixer: route 'Bluetooth A2DP Capture' not found.
D/AudioHardwareALSA( 2023): mixer initialized.
D/AudioHardwareInterface( 2023): setMode(NORMAL)
I/CameraService( 2023): CameraService started: pid=2023
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/AudioHardwareALSA( 2023): virtual android::AudioStreamOut*
android::AudioHardwareALSA::openOutputStream(uint32_t, int*,
uint32_t*, uint32_t*, android::status_t*)] Setting ALSA device.
I/AudioHardwareALSA( 2023): Try to open ALSA PLAYBACK device
AndroidPlayback_Speaker_normal
E/ALSALib ( 2023):
external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain
info for CTL elem (MIXER,'Playback Path',0,0,0): No such file or
directory
E/ALSALib ( 2023):
external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain
info for CTL elem (MIXER,'Playback Path',0,0,0): No such file or
directory
I/AudioHardwareALSA( 2023): Initialized ALSA PLAYBACK device AndroidPlayback
D/AudioHardwareALSA( 2023): Set PLAYBACK PCM format to S16_LE (Signed
16 bit Little Endian)
D/AudioHardwareALSA( 2023): Using 2 channels for PLAYBACK.
D/AudioHardwareALSA( 2023): Set PLAYBACK sample rate to 44100 HZ
D/AudioHardwareALSA( 2023): Buffer size: 2048
D/AudioHardwareALSA( 2023): Latency: 46439
I/AudioFlinger( 2023): AudioFlinger's thread 0x24e68 ready to run
W/ ( 2018): SurfaceFlinger not published, waiting...
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/AndroidRuntime( 2022): --- registering native functions ---
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/ethernet( 2022): Loading ethernet jni class
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/SamplingProfilerIntegration( 2022): Profiler is disabled.
I/Zygote ( 2022): Preloading classes...
E/Zygote ( 2022): setreuid() failed. errno: 30
D/dalvikvm( 2022): GC_EXPLICIT freed 823 objects / 47624 bytes in 2ms
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/dalvikvm( 2022): GC_EXPLICIT freed 219 objects / 13600 bytes in 2ms
I/bluetooth_ScoSocket.cpp( 2022): Entry name = MY-CAR ScoTypes = 0x7f
I/bluetooth_ScoSocket.cpp( 2022): Entry name = Motorola HF850 ScoTypes = 0x7
D/dalvikvm( 2022): GC_EXPLICIT freed 253 objects / 14320 bytes in 2ms
D/dalvikvm( 2022): GC_EXPLICIT freed 466 objects / 28856 bytes in 3ms
D/dalvikvm( 2022): GC_EXPLICIT freed 2090 objects / 108320 bytes in 3ms
W/ ( 2018): SurfaceFlinger not published, waiting...
W/MediaProfiles( 2022): could not find media config xml file
D/dalvikvm( 2022): GC_EXPLICIT freed 274 objects / 15672 bytes in 4ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 5052 objects / 224328 bytes in 14ms
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/dalvikvm( 2022): GC_FOR_MALLOC freed 11282 objects / 382408 bytes in 9ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 9806 objects / 463056 bytes in 10ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 8712 objects / 423264 bytes in 11ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 7551 objects / 461328 bytes in 11ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 7392 objects / 460072 bytes in 12ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 7395 objects / 458408 bytes in 12ms
D/dalvikvm( 2022): GC_FOR_MALLOC freed 7690 objects / 456536 bytes in 12ms
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/dalvikvm( 2022): GC_EXPLICIT freed 1349 objects / 86000 bytes in 18ms
D/dalvikvm( 2022): GC_EXPLICIT freed 598 objects / 29200 bytes in 11ms
D/dalvikvm( 2022): GC_EXPLICIT freed 449 objects / 25032 bytes in 11ms
D/dalvikvm( 2022): GC_EXPLICIT freed 306 objects / 35096 bytes in 16ms
D/dalvikvm( 2022): GC_EXPLICIT freed 279 objects / 19008 bytes in 16ms
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/dalvikvm( 2022): GC_EXPLICIT freed 341 objects / 18480 bytes in 24ms
D/dalvikvm( 2022): GC_EXPLICIT freed 449 objects / 28368 bytes in 17ms
D/dalvikvm( 2022): GC_EXPLICIT freed 527 objects / 52936 bytes in 18ms
D/dalvikvm( 2022): GC_EXPLICIT freed 623 objects / 34024 bytes in 18ms
D/dalvikvm( 2022): GC_EXPLICIT freed 861 objects / 46896 bytes in 18ms
D/dalvikvm( 2022): GC_EXPLICIT freed 1747 objects / 85536 bytes in 19ms
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
D/dalvikvm( 2022): GC_EXPLICIT freed 447 objects / 29472 bytes in 20ms
D/dalvikvm( 2022): GC_EXPLICIT freed 315 objects / 20176 bytes in 26ms
I/Zygote ( 2022): ...preloaded 1265 classes in 6329ms.
E/Zygote ( 2022): setreuid() failed. errno: 30
D/dalvikvm( 2022): GC_EXPLICIT freed 104 objects / 14192 bytes in 19ms
W/ ( 2018): SurfaceFlinger not published, waiting...
I/ServiceManager( 2018): Waiting for sevice SurfaceFlinger...
---------------------------------------------------------
boot message
---------------------------------------------------------
U-Boot 1.3.4-dirty (Apr 28 2011 - 11:22:10) for SMDKV210
CPU: S5PV210@800MHz(OK)
APLL = 800MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: SMDKV210
DRAM: 512 MB
Flash: 8 MB
SD/MMC: Card init fail!
0 MB
NAND: 256 MB
*** Warning - using default environment
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
Fastboot: employ default partition information
[Partition table on NAND]
ptn 0 name='bootloader' start=0x0 len=0x100000(~1024KB)
ptn 1 name='recovery' start=0x100000 len=0x500000(~5120KB)
ptn 2 name='kernel' start=0x600000 len=0x500000(~5120KB)
ptn 3 name='ramdisk' start=0xB00000 len=0x300000(~3072KB)
ptn 4 name='system' start=0xE00000 len=0x5A00000(~92160KB) (Yaffs)
ptn 5 name='cache' start=0x6800000 len=0x5000000(~81920KB) (Yaffs)
ptn 6 name='userdata' start=0xB800000 len=N/A (Yaffs)
Fastboot ended by user
Hit any key to stop autoboot: 1 0
NAND read: device 0 offset 0x600000, size 0x500000
Main area read (40 blocks):
5242880 bytes read: OK
NAND read: device 0 offset 0xb00000, size 0x200000
Main area read (16 blocks):
2097152 bytes read: OK
Boot with zImage
get_format
-------- 1 --------
## Loading init Ramdisk from Legacy Image at 20c00000 ...
Image Name: ramdisk
Created: 2011-04-29 2:23:52 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 1298156 Bytes = 1.2 MB
Load Address: 30800000
Entry Point: 30800000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing
Linux...................................................................................................................................................................................................
done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.32.9 (bvcom@ubuntu) (gcc version 4.4.1 (Sourcery G++
Lite 2009q3-67) ) #52 PREEMPT Fri Apr 29 10:21:04 CST 2011
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDKV210
Ignoring unrecognised tag 0x41001099
Memory policy: ECC disabled, Data cache writeback
Truncating RAM at 20000000-5fffffff to -4affffff (vmalloc region overlap).
CPU S5PV210/S5PC110 (id 0x43110200)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
copy: bad source 0
mout_audss: bad source 0
S5PV210: PLL settings, A=800000000, M=667000000, E=80000000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x20f3d000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
s5pv210: 14680064 bytes system memory reserved for fimc0 at 0x42400000
s5pv210: 3145728 bytes system memory reserved for fimc1 at 0x43200000
s5pv210: 6291456 bytes system memory reserved for fimc2 at 0x43500000
s5pv210: 16777216 bytes system memory reserved for pmem at 0x43b00000
s5pv210: 10485760 bytes system memory reserved for pmem_gpu1 at 0x44b00000
s5pv210: 1048576 bytes system memory reserved for pmem_adsp at 0x45500000
s5pv210: 5132288 bytes system memory reserved for jpeg at 0x45600000
s5pv210: 10485760 bytes system memory reserved for texstream at 0x45ae5000
s5pv210: 7680000 bytes system memory reserved for fimd at 0x464e5000
s5pv210: 8388608 bytes system memory reserved for g2d at 0x46c38000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 174752
Kernel command line: console=ttySAC2,115200 init=/linuxrc
no_console_suspend mem=1024M
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 688MB = 688MB total
Memory: 533120KB available (5040K code, 1435K data, 164K init, 0K highmem)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:339
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
VIC @f4020000: id 0x00041192, vendor 0x41
vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR
VIC @f4030000: id 0x00041192, vendor 0x41
vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR
mult[140737]
max_delta_ns[2147483647]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
console [ttySAC2] enabled
Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
S5PC110 Hardware version : EVT1
S3C Power Management, Copyright 2004 Simtec Electronics
S5PV210 Power Domain API Enable
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
bio: create slab <bio-0> at 0
s3c-i2c s3c2410-i2c.0: slave address 0x10
s3c-i2c s3c2410-i2c.0: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2410-i2c.1: slave address 0x10
s3c-i2c s3c2410-i2c.1: bus frequency set to 81 KHz
s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2410-i2c.2: slave address 0x10
s3c-i2c s3c2410-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2410-i2c.2: i2c-2: S3C I2C adapter
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1264K
S5PV210 ADC driver, (c) 2010 Samsung Electronics
cpuidle: phy_regs_save:0x4a8b8000
Loaded driver for PL330 DMAC-0 s3c-pl330
DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
NetWinder Floating Point Emulator V0.97 (extended precision)
ashmem: initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
yaffs Apr 28 2011 20:11:23 Installing.
msgmni has been set to 1044
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
i2c /dev entries driver
Linux video capture interface: v2.00
IPC probe success
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2009 Samsung Electronics
S5PC11X CEC Driver, (c) 2009 Samsung Electronics
max8698_ldo_enable[246] ldo 2
regulator: LDO2: 1100 mV
max8698_ldo_enable[246] ldo 3
regulator: LDO3: 1100 mV
max8698_ldo_enable[246] ldo 4
regulator: LDO4: 1800 mV
regulator: LDO5: 2800 mV
max8698_ldo_enable[246] ldo 6
regulator: LDO6: 2600 mV
max8698_ldo_enable[246] ldo 7
regulator: LDO7: 2800 mV
max8698_ldo_enable[246] ldo 8
regulator: LDO8: 3300 mV
regulator: LDO9: 3000 mV
max8698_ldo_enable[246] ldo 10
regulator: BUCK1: 750 <--> 1500 mV
max8698_ldo_enable[246] ldo 11
regulator: BUCK2: 950 <--> 1200 mV
regulator: BUCK3: 1800 mV
s3cfb.c s3cfb_probe
s3cfb s3cfb: [fb2] dma: 0x464e5000, cpu: 0xec800000, size: 0x002ee000
fbcon: s3cfb (fb0) is primary device
Console: switching to colour frame buffer device 100x30
FIMD src sclk = 133400000
s3cfb s3cfb: registered successfully
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit)
Creating 7 MTD partitions on "s5pv210-nand":
0x0000000c0000-0x000000100000 : "misc"
0x000000100000-0x000000600000 : "recovery"
0x000000600000-0x000000b00000 : "kernel"
0x000000b00000-0x000000e00000 : "ramdisk"
0x000000e00000-0x000006800000 : "system"
0x000006800000-0x00000b800000 : "cache"
0x00000b800000-0x000010000000 : "userdata"
Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves attached
Max,Min-Speed [33350000, 130273]Hz
Irq=79 IOmem=[0xe1300fff-0xe1300000] DMA=[Rx-30, Tx-31]
Samsung SoC SPI Driver loaded for Bus SPI-1 with 1 Slaves attached
Max,Min-Speed [33350000, 130273]Hz
Irq=80 IOmem=[0xe1400fff-0xe1400000] DMA=[Rx-32, Tx-33]
PPP generic driver version 2.4.2
dm9000 Ethernet Driver, V1.31
ERROR : resetting
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: read wrong id 0x2b2a2928
dm9000 dm9000.0: wrong id: 0x2b2a2928
dm9000 dm9000.0: not found (-19).
usbcore: registered new interface driver usb8xxx
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
libertas_spi: Libertas SPI driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5pv210-ohci s5pv210-ohci: s5pv210 OHCI
s5pv210-ohci s5pv210-ohci: new USB bus registered, assigned bus number 1
s5pv210-ohci s5pv210-ohci: irq 87, io mem 0xec300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c_udc_probe
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c057de20
android_bind
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
f_adb init
android_register_function adb
f_mass_storage init
android_register_function usb_mass_storage
mass_storage_bind_config
fsg_probe pdata: c057de44
android_usb gadget: Number of LUNs=1
adb_bind_config
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: s3c-keypad as /devices/virtual/input/input0
s3c-keypadInitialized
S3C Keypad Driver
S5P Touchscreen driver, (c) 2008 Samsung Electronics
S5P TouchScreen got loaded successfully : 12 bits
input: S5P TouchScreen as /devices/virtual/input/input1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
using rtc device, s3c, for alarms
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
s3c_bat_init
sec-fake-battery sec-fake-battery: s3c_bat_probe
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc2::
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
Registered led device: mmc3::
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
s3c_idma_preallocate_buffer: VA-eb8c0000 PA-C0000000 163840bytes
asoc: WM8580 PAIFRX <-> s3c64xx-i2s mapping ok
s3c_preallocate_dma_buffer: VA-ff017000, PA-4AC60000, 131072bytes
asoc: WM8580 PAIFTX <-> s3c64xx-i2s mapping ok
ASoC: Failed to create Rear-L/R debugfs file
ASoC: Failed to create Center/Sub debugfs file
ASoC: Failed to create Front-L/R debugfs file
ALSA device list:
#0: smdk (WM8580)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
S5K4BA 0-002d: s5k4ba has been probed
S5K4BA 0-002d: fetching platform data
S5K4BA 0-002d: parallel mode
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
regulator_init_complete: incomplete constraints, leaving VCC_MEM on
regulator_init_complete: incomplete constraints, leaving
{VADC/VSYS/VKEY}_2.8V on
regulator_init_complete: incomplete constraints, leaving VDAC_2.8V on
regulator_init_complete: incomplete constraints, leaving VMMC_2.8V/VEXT_2.8V on
regulator_init_complete: incomplete constraints, leaving V_MIPI_1.8V on
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
Freeing init memory: 164K
init: /init.rc: 233: invalid option 'chmod'
android_usb gadget: high speed config #1: UMS Only (Not debugging mode)
mmc3: new high speed SDHC card at address 0007
mmcblk0: mmc3:0007 SD4GB 3.67 GiB
mmcblk0:
mmcblk0: retrying using single block read
mmcblk0: error -110 sending status comand
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -110 sending read/write command, response 0x0, card status 0x700
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
unable to read partition table
init: cannot open '/initlogo.rle'
PA FB = 0x464E5000, bits per pixel = 32
screen width=800 height=480 va=0xe64e5000 pa=0x464e5000
Back frameBuffer[0].VAddr=e665c000 PAddr=4665c000 size=1536000
yaffs: dev is 32505860 name is "mtdblock4"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.4, "mtdblock4"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
yaffs: dev is 32505862 name is "mtdblock6"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.6, "mtdblock6"
block 123 is bad
block 180 is bad
block 446 is bad
yaffs_read_super: isCheckpointed 0
yaffs: dev is 32505861 name is "mtdblock5"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.5, "mtdblock5"
block 571 is bad
yaffs_read_super: isCheckpointed 0
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
enabling adb
adb_open
sh: can't access tty; job control turned off
# android_usb gadget: high speed config #1: UMS + ADB (Debugging mode)
warning: `rild' uses 32-bit capabilities (legacy support in use)
PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [473,
services4/system/s5pc110/sysconfig.c]
Thanks
--
Bian Jiang
http://www.wifihack.net/
http://golang-china.org/
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
