Hi All, I am trying porting Android on Gumstix Overo.
I am taking images from: http://cumulus.gumstix.org/images/android/2011-03-10-x34EVS/ Then I am creating bootable SD card and trying to boot from that SD card. However, I am am not able to boot successfully. I am pasting boot log below: lib80211: common routines for IEEE802.11 drivers ThumbEE CPU extension supported. Power Management for TI OMAP3. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 fbcvt: 1024x768@60: CVT Name - .786M3-R Console: switching to colour frame buffer device 60x34 omapdss DPI: Could not find exact pixel clock. Requested 9200 kHz, got 9094 kHz regulator_init_complete: incomplete constraints, leaving VDVI on regulator_init_complete: incomplete constraints, leaving VDAC on twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813) mt9v032 3-005c: unable to detect mt9v032 sensor mt9v032 3-005c: unable to detect mt9v032 sensor mt9v032 3-005c: unable to detect mt9v032 sensor mt9v032 3-005c: unable to detect mt9v032 sensor omap_vout omap_vout: probed for an unknown device Waiting for root device /dev/mmcblk0p2... mmc0: host does not support reading read-only switch. assuming write- enable. mmc0: new SD card at address aaaa mmcblk0: mmc0:aaaa SU02G 1.84 GiB mmcblk0: p1 p2 kjournald starting. Commit interval 5 seconds mmc1: new SDIO card at address 0001 EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 172K Warning: unable to open an initial console. init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' # warning: `rild' uses 32-bit capabilities (legacy support in use) enabling adb adb_open init: sys_prop: mis-match msg size recieved: -1 expected: 128 binder: release 1100:1163 transaction 2941 in, still active binder: send failed reply for transaction 2941 to 1301:1655 request_suspend_state: wakeup (3->0) at 392284363263 (2000-01-01 00:06:43.361481180 UTC) binder: release 1779:1779 transaction 5437 out, still active binder: 1301:1309 transaction failed 29189, size 14448-0 binder: send failed reply for transaction 5437, target dead request_suspend_state: sleep (0->3) at 592477508964 (2000-01-01 00:10:03.554626881 UTC) omaplfb: **** SUSPEND binder: release 1929:1929 transaction 6550 out, still active binder: release 1929:2005 transaction 6502 out, still active binder: release 1929:2006 transaction 6508 out, still active binder: release 1929:2007 transaction 6520 out, still active binder: 1777:1882 transaction failed 29189, size 28-4 binder: send failed reply for transaction 6508, target dead binder: 1777:1797 transaction failed 29189, size 28-4 binder: send failed reply for transaction 6520, target dead binder: 1777:1883 transaction failed 29189, size 28-4 binder: send failed reply for transaction 6502, target dead binder: 1777:1798 transaction failed 29189, size 2372-0 binder: send failed reply for transaction 6550, target dead init: sys_prop: mis-match msg size recieved: -1 expected: 128 I am clueless what should I do. and I am beginner in dealing with porting OS on hardware. Thank You all for your kind help. DM -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
