Dear All,
I am trying to port GB with 2.6.35 kernel on OMAP3ZOOM board with SD
card support. My build works fine the first time i boot but from next
time onwards it flashes the android logo and stops there. with the
message as transaction failed. If i reformat the SD card and load
freshly it works fine for the first time.
Can anybody suggest why am i getting binder transaction fail. Any help
on this will be greatly appreciated.
U-Boot 1.1.4 (Mar 18 2011 -
14:07:35)
OMAP3630-GP rev 1, CPU-OPP2
L3-200MHz
OMAP3630Zoom3 1.0 Version + mDDR (Boot
NAND)
DRAM: 1024
MB
NAND:512
MiB
In:
serial
Out:
serial
Err:
serial
Battery levels: main 3951 mV, backup 3095
mV
Hit any key to stop autoboot:
0
MMC1 Initalization
OK
Reading data at 0x4a5e00 -- 100%
complete.
3482628 bytes
read
## Booting image at
81c00000 ...
Image Name: Linux-2.6.35.7-00096-
g7c44f55
Image Type: ARM Linux Kernel Image
(uncompressed)
Data Size: 3482564 Bytes = 3.3
MB
Load Address:
80008000
Entry Point:
80008000
Verifying Checksum ...
OK
OK
Starting
kernel ...
Uncompressing Linux... done, booting the
kernel.
Initializing cgroup subsys
cpu
Linux version 2.6.35.7-00096-g7c44f55 (root@infba02140) (gcc version
4.3.2 (Sou1
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction
cache
Machine: OMAP3630 Zoom3
board
Memory policy: ECC disabled, Data cache
writeback
OMAP3630 ES1.1 (l2cache iva sgx neon isp
192mhz_clk )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size:
0x100000
Reserving 4194304 bytes SDRAM for
VRAM
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
260096
Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw
rootdelay=1
videoout=omap24xxvout omap_vout.video1_numbuffers=6
omap_vout.vid1_static_vrfb_”
PID hash table entries: 4096 (order: 2, 16384
bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
Memory: 512MB 256MB 256MB = 1024MB
total
Memory: 1021480k/1021480k available, 27096k reserved, 262144K
highmem
Virtual kernel memory
layout:
vector : 0xffff0000 - 0xffff1000 ( 4
kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896
kB)
DMA : 0xffc00000 - 0xffe00000 ( 2
MB)
vmalloc : 0xf0800000 - 0xf8000000 ( 120
MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768
MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2
MB)
modules : 0xbf000000 - 0xbfe00000 ( 14
MB)
.init : 0xc0008000 - 0xc003d000 ( 212
kB)
.text : 0xc003d000 - 0xc064f000 (6216
kB)
.data : 0xc0680000 - 0xc06d3fa0 ( 336
kB)
Hierarchical RCU
implementation.
RCU-based detection of stalled CPUs is
disabled.
Verbose stalled-CPUs detection is
disabled.
NR_IRQS:
402
Clocking rate (Crystal/Core/MPU): 26.0/400/600
MHz
omap_hwmod: mmc1:
resetting
omap_hwmod: mmc2:
resetting
omap_hwmod: mmc3:
resetting
omap_hwmod: i2c1:
resetting
omap_hwmod: i2c1: failed to reset in 10000
usec
omap_hwmod: i2c2:
resetting
omap_hwmod: i2c2: failed to reset in 10000
usec
omap_hwmod: i2c3:
resetting
omap_hwmod: i2c3: failed to reset in 10000
usec
omap_hwmod: uart1:
resetting
omap_hwmod: uart2:
resetting
omap_hwmod: uart3:
resetting
omap_hwmod: gpio1:
resetting
omap_hwmod: gpio2:
resetting
omap_hwmod: gpio3:
resetting
omap_hwmod: gpio4:
resetting
omap_hwmod: gpio5:
resetting
omap_hwmod: gpio6:
resetting
omap_hwmod: wd_timer2:
resetting
omap_hwmod: dma:
resetting
omap_hwmod: mcspi1:
resetting
omap_hwmod: mcspi2:
resetting
omap_hwmod: mcspi3:
resetting
omap_hwmod: mcspi4:
resetting
omap_hwmod: timer1:
resetting
omap_hwmod: timer2:
resetting
omap_hwmod: timer3:
resetting
omap_hwmod: timer4:
resetting
omap_hwmod: timer5:
resetting
omap_hwmod: timer6:
resetting
omap_hwmod: timer7:
resetting
omap_hwmod: timer8:
resetting
omap_hwmod: timer9:
resetting
omap_hwmod: timer10:
resetting
omap_hwmod: timer11:
resetting
omap_hwmod: dss:
resetting
omap_hwmod: dss: failed to reset in 10000
usec
Reprogramming SDRC clock to 400000000
Hz
GPMC revision
5.0
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
interrupts
Total of 96 interrupts on 1 active
controller
OMAP clockevent source: GPTIMER1 at 32768
Hz
Console: colour dummy device
80x30
Calibrating delay loop... 597.64 BogoMIPS
(lpj=2334720)
pid_max: default: 32768 minimum:
301
Mount-cache hash table entries:
512
Initializing cgroup subsys
debug
Initializing cgroup subsys
cpuacct
Initializing cgroup subsys
freezer
CPU: Testing write buffer coherency:
ok
regulator: core version
0.5
NET: Registered protocol family
16
OMAP GPIO hardware version
2.5
omap_mux_init: Add partition: #1: core, flags:
0
SmartReflex class 1.5 driver: initialized
(86400000ms)
wl127x_vio_leakage_fix
res->start =
48074000
res->start =
49022000
res->start =
49024000
res->start =
49026000
res->start =
48096000
OMAP DMA hardware revision
5.0
dma dma.0: System DMA
registered
bio: create slab <bio-0> at
0
SCSI subsystem
initialized
usbcore: registered new interface driver
usbfs
usbcore: registered new interface driver
hub
usbcore: registered new device driver
usb
i2c_omap i2c_omap.1: bus 1 rev4.0 at 100
kHz
twl4030: PIH (irq 7) chaining IRQs
368..375
twl4030: power (irq 373) chaining IRQs
376..383
twl4030: gpio (irq 368) chaining IRQs
384..401
regulator: VUSB1V5: 1500 mV normal
standby
regulator: VUSB1V8: 1800 mV normal
standby
regulator: VUSB3V1: 3100 mV normal
standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB
module
regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
standby
regulator: VDAC: 1800 mV normal
standby
regulator: VPLL2: 1800 mV normal
standby
regulator: VMMC2: 1850 mV normal
standby
regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal
standby
i2c_omap i2c_omap.2: bus 2 rev4.0 at 100
kHz
i2c_omap i2c_omap.3: bus 3 rev4.0 at 400
kHz
Advanced Linux Sound Architecture Driver Version
1.0.23.
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies
Inc.
Bluetooth: Core ver
2.15
NET: Registered protocol family
31
Bluetooth: HCI device and connection manager
initialized
Bluetooth: HCI socket layer
initialized
Switching to clocksource
timer-32k
musb_hdrc: version 6.0, musb-dma, otg (peripheral+host),
debug=0
musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA,
IRQ 92
NET: Registered protocol family
2
IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
TCP bind hash table entries: 65536 (order: 6, 262144
bytes)
TCP: Hash tables configured (established 131072 bind
65536)
TCP reno
registered
UDP hash table entries: 512 (order: 1, 8192
bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192
bytes)
NET: Registered protocol family
1
RPC: Registered udp transport
module.
RPC: Registered tcp transport
module.
RPC: Registered tcp NFSv4.1 backchannel transport
module.
platform mpu.0: OPP enabled 800
MHz
platform iva.0: OPP enabled 660
MHz
platform mpu.0: OPP enabled 1000
MHz
platform iva.0: OPP enabled 800
MHz
zoom3_opp_init: MPU does not support 1200
MHz
zoom2_wifi_init:
start
omap-iommu omap-iommu.0: isp
registered
highmem bounce pool size: 64
pages
ashmem:
initialized
VFS: Disk quotas
dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat,
Inc.
msgmni has been set to
1483
alg: No test for stdrng
(krng)
io scheduler noop
registered
io scheduler cfq registered
(default)
OMAP DSS rev
2.0
OMAP DISPC rev
3.0
OMAP DSI rev
1.0
OMAP VENC rev
2
sil9022 3-0039: <sil9022_set_cm_clkout_ctrl> sil9022 HDMI Chip version
= b0
omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not
found
omap_smartreflex_enable: omap_sr struct for sr_core not
found
Serial: 8250/16550 driver, 4 ports, IRQ sharing
disabled
serial8250.0: ttyS0 at MMIO 0x10000000 (irq = 262) is a
ST16654
console [ttyS0]
enabled
omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP
UART0
omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP
UART1
omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP
UART2
brd: module
loaded
loop: module
loaded
Android kernel panic handler initialized
(bind=kpanic)
omap2-nand driver
initializing
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB
1,8V 16-b)
Creating 7 MTD partitions on "omap2-nand.
0":
0x000000000000-0x000000080000 : "X-Loader-
NAND"
0x000000080000-0x000000200000 : "U-Boot-
NAND"
0x0000001c0000-0x000000200000 : "Boot Env-
NAND"
0x000000200000-0x000001e00000 : "Kernel-
NAND"
0x000002000000-0x00000d400000 :
"system"
0x00000d400000-0x000011400000 :
"userdata"
0x000011400000-0x000013400000 :
"cache"
smsc911x: Driver version
2008-10-21.
smsc911x-mdio:
probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01,
irq=-1)
net eth0: MAC Address: 00:08:ee:03:ea:
4b
Initializing USB Mass Storage
driver...
usbcore: registered new interface driver usb-
storage
USB Mass Storage support
registered.
android
init
android_probe pdata:
c06936b8
android_bind
android_usb gadget: android_usb
ready
musb_hdrc musb_hdrc: MUSB HDRC host
driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number
1
usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb1: Product: MUSB HDRC host
driver
usb usb1: Manufacturer: Linux 2.6.35.7-00096-g7c44f55 musb-
hcd
usb usb1: SerialNumber:
musb_hdrc
hub 1-0:1.0: USB hub
found
hub 1-0:1.0: 1 port
detected
f_adb
init
android_register_function
adb
f_mass_storage
init
fsg_probe pdev: c0693460, pdata:
c06936a8
android_register_function
usb_mass_storage
f_mtp
init
android_register_function
mtp
f_rndis
init
android_register_function
rndis
rndis_function_bind_config MAC:
02:76:38:31:31:46
android_usb gadget: using random self ethernet
address
android_usb gadget: using random host ethernet
address
usb0: MAC
4e:a6:a9:3c:b6:0c
usb0: HOST MAC c6:e8:85:60:5e:
3d
android_usb gadget: Mass Storage Function, version:
2009/09/11
android_usb gadget: Number of
LUNs=1
lun0: LUN: removable file: (no
medium)
adb_bind_config
mtp_bind_config
input: twl4030-keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/
twl4030_keyp0
synaptics_ts_probe: Product Major Version
1
synaptics_ts_probe: Product Minor Version
5
synaptics_ts_probe: product property
2
synaptics_ts_probe: device control
81
synaptics_ts_probe: interrupt enable
3
synaptics_ts_probe: 0xe0: 1 1 1 2 1 5 0
0
synaptics_ts_probe: Sensor properties
601
synaptics_ts_probe: max_x 7515, max_y
4667
synaptics_ts_probe: inactive_x 0 0, inactive_y 0
0
synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0
0-0
input: synaptics-rmi-touchscreen as /devices/virtual/input/
input1
synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in
interrupt moe
using rtc device, twl_rtc, for
alarms
twl_rtc twl_rtc: rtc core: registered twl_rtc as
rtc0
i2c /dev entries
driver
IR NEC protocol handler
initialized
IR RC5(x) protocol handler
initialized
IR RC6 protocol handler
initialized
IR JVC protocol handler
initialized
IR Sony protocol handler
initialized
Linux video capture interface:
v2.00
omap-previewer omap-previewer: omap-previewer: Registered preview
wrapper
omap3isp omap3isp: Revision 15.0
found
omap-iommu omap-iommu.0: isp: version
1.1
omap-iommu omap-iommu.0: isp: version
1.1
Driver for 1-wire Dallas network
protocol.
omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt
mode
w1_master_driver w1 bus master: Family 1 for 01.000000000000.3d is not
register.
OMAP Watchdog Timer Rev 0x31: initial timeout 60
sec
Bluetooth: HCI UART driver ver
2.2
Bluetooth: HCI H4 protocol
initialized
Bluetooth: HCILL protocol
initialized
cpuidle: using governor
ladder
cpuidle: using governor
menu
omap_display_led_probe:Enter
omap_display_led_probe:Exit
usbcore: registered new interface driver
usbhid
usbhid: USB HID core
driver
logger: created 64K log
'log_main'
logger: created 256K log
'log_events'
logger: created 64K log
'log_radio'
logger: created 64K log
'log_system'
Zoom2 SoC
init
asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping
ok
asoc: twl4030-voice <-> omap-mcbsp-dai.2 mapping
ok
asoc: twl4030-voice <-> omap-mcbsp-dai.2 mapping
ok
asoc: twl4030-clock <-> omap-mcbsp-dai.3 mapping
ok
ALSA device
list:
#0: Zoom2
(twl4030)
oprofile: hardware counters not
available
oprofile: using timer
interrupt.
Netfilter messages via NETLINK
v0.30.
nf_conntrack version 0.5.0 (15960 buckets, 63840
max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable
it.
ctnetlink v0.93: registering with
nfnetlink.
xt_time: kernel timezone is
-0000
ip_tables: (C) 2000-2006 Netfilter Core
Team
arp_tables: (C) 2002 David S.
Miller
TCP cubic
registered
Initializing XFRM netlink
socket
NET: Registered protocol family
10
lo: Disabled Privacy
Extensions
Mobile
IPv6
IPv6 over IPv4 tunneling
driver
sit0: Disabled Privacy
Extensions
ip6tnl0: Disabled Privacy
Extensions
NET: Registered protocol family
17
NET: Registered protocol family
15
Bluetooth: L2CAP ver
2.14
Bluetooth: L2CAP socket layer
initialized
Bluetooth: SCO (Voice Link) ver
0.6
Bluetooth: SCO socket layer
initialized
Bluetooth: RFCOMM TTY layer
initialized
Bluetooth: RFCOMM socket layer
initialized
Bluetooth: RFCOMM ver
1.11
Bluetooth: BNEP (Ethernet Emulation) ver
1.3
Bluetooth: HIDP (Human Interface Emulation) ver
1.2
omap_hwmod: Initialize debugfs
support
Power Management for TI
OMAP3.
smartreflex smartreflex.0: omap_smartreflex_probe: SmartReflex driver
initializd
smartreflex smartreflex.1: omap_smartreflex_probe: SmartReflex driver
initializd
dspbridge_init: 600000 bytes @
81400000
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev
3
omapfb omapfb: failed to parse vram
parameter
Console: switching to colour frame buffer device
100x30
omapdss DPI: Could not find exact pixel clock. Requested 21800 kHz,
got 21600 kz
twl_rtc twl_rtc: setting system clock to 2000-01-21 02:06:03 UTC
(948420363)
lv8093 2-0072: Registered lv8093 as V4L2
device.
Registered lv8093 as i2c
device.
lv8093 Lens HW
detected
omap-iommu omap-iommu.0: isp: version
1.1
Context config pixel format
unsupported
imx046 2-001a: model id detected 0x46 mfr 0xb, rev#
0x2
imx046 2-001a: imx046 chip version 0x02
detected
omap-iommu omap-iommu.0: isp: version
1.1
omap3 omap3isp CSI memvs
initted
omap_vout omap_vout: Buffer Size =
1843200
omap_vout omap_vout: : registered and initialized video device
3
omap_vout omap_vout: Buffer Size =
1843200
omap_vout omap_vout: : registered and initialized video device
4
Waiting 1sec before mounting root
device...
mmc0: host does not support reading read-only switch. assuming write-
enable.
mmc0: new SD card at address
aaaa
mmcblk0: mmc0:aaaa SD02G 1.84
GiB
mmcblk0: p1
p2
mmc1: new high speed DDR MMC card at address
0001
mmcblk1: mmc1:0001 STM16G 14.8
GiB
mmcblk1: unknown partition
table
EXT3-fs: barriers not
enabled
kjournald starting. Commit interval 5
seconds
EXT3-fs (mmcblk0p2): using internal
journal
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data
mode
VFS: Mounted root (ext3 filesystem) on device
179:2.
Freeing init memory:
212K
init: Timed out waiting for /
dev/.coldboot_done
init: service 'console' requires
console
init: cannot find '/system/bin/pvrsrvinit', disabling
'pvrsrvinit'
init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
init: cannot find '/system/bin/fw3a_core', disabling
'fw3a'
init: cannot find '/system/bin/playmp3', disabling
'bootsound'
init: untracked pid 793
exited
init: untracked pid 791
exited
(stk) :sysfs entries
created
(stk) : debugfs entries
created
warning: `rild' uses 32-bit capabilities (legacy support in
use)
fm_drv: module is from the staging directory, the quality is unknown,
you have .
gps_drv: module is from the staging directory, the quality is unknown,
you have.
binder: 966:966 refcount change on invalid ref
0
binder: 966:966 refcount change on invalid ref
0
binder: 966:966 transaction failed 29189, size 124-4
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
