Hi Partha, You may try to access PC serial port in android emulator, that I also had not done before.
I searched this question in the internet, and there are same suggestions: 1. Use this command to start up your emulator: emulator -radio /dev/ ttyS0 2. Rrefer to the detail information of "ril" from internet. BR, On 9月29日, 下午2时20分, Sarathy <[email protected]> wrote: > Hi Chris, > > Thanks for your response. > Please let me make my question clear, I have an non-os microcontroller > board which sends the temp sensor data through UART port. I dont have > any android board with me, so i need to develop an application in the > android sdk(windows) which displays the temperature data received from > the com port. > > Hope you got my question. > Please let me know how I can achieve that. > > Once again thanks for your reply. > > Thanks, > Partha > > On Sep 27, 5:25 am, chris <[email protected]> wrote: > > > > > > > > > Hi Sarathy, > > > You can have a try like this: > > 1. Connect your android device to PC used serial cable, > > 2. Open the serial port that connected with PC, like: open("/dev/ > > s3c2410_serial0", O_RDWR); > > 3. Then you can use the FileDescription which return from open to > > access the serial port. > > > chris, > > > On 9月26日, 下午7时49分, Sarathy <[email protected]> wrote: > > > > Hi All, > > > > I'm a newbee on developing android application. I want to develop an > > > application on android SDK which gets the data from the PC's serial > > > (com) port. > > > I have browsed in internet but couldn't get enough support. > > > > PS : I'm using Windows PC. > > > > Appreciate your early responses and guidance. > > > > Thanks, > > > Sarathy -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
