Hi John, Sorry I didn't not respond to your earlier mail.
I have the wifi/bluetooth build available for gingerbread (2.6.37) on igep2 board but since I was on vacation and currently on a business trip I wasn't able to supply you the sollution I have. The solution builds the drivers, stores it in the rfs and also copies the firmware from the igep side and copies it to the the rfs. I can provide this when I am back. All of this is part of the rowboat build process so no manual stuff you need to do. I will share the solution when I am back from my business trip. Hedwin On Wed, Jan 11, 2012 at 6:23 PM, iAmMREllis <[email protected]>wrote: > Hello guys > > I was just after a bit of help with the porting of the wireless > drivers to the rootfs. > > i have so far followed this guide:- > > > http://processors.wiki.ti.com/index.php/Android_wireless_build_and_porting_guide > > and have managed to get upto > > Building wlan drivers > > $ ./WLAndroidBuild.sh build wlan > > When i have issued the above command it begins to check the build > setup, and states " it may take a few seconds to build, Please wait > " ... > > However it then says " Compiler /home//prebuilt/linux-x86/ > toolchain.arm-eabi-4.4.0/bin/arm-eabi-gcc "does not exist" > > I have set the correct toolchain path by issuing export PATH=${PWD}/ > prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin:$PATH > > however i still cannot seem to build the drivers, any help would be > much appreciated ??? > if there are any alternative ways, that would be great also > > Regards > J.Ells -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
