Hi Devindrappa,
Thanks for your response.
i have written c application for gprs8000 in devkit8000
contains
fd = open("/dev/ttyS0", O_RDWR);
init_ttyS(fd);
GPRS_Net_Test(fd);
here
init_ttyS(fd){
struct termios options;
bzero(&options, sizeof(options)); /* clear options*/
cfsetispeed(&options,B115200); /* setup baud rate*/
cfsetospeed(&options,B115200);
options.c_cflag |= (CRTSCTS | CS8 | CLOCAL | CREAD);
options.c_iflag = IGNPAR;
tcflush(fd, TCIFLUSH);
tcsetattr(fd, TCSANOW, &options);
checkstate(fd)
}
GPRS_Net_Test(int fd){
char *cmd_buf1 = "at+cgatt=1\r";
char *cmd_buf2 = "at+cgdcont=1,\"IP\",\"bsnlnet\"\r";
char *cmd_buf3 = "at+cdnscfg?\r";
write(fd,cmd_buf1,sizeof(cdm_buf1);
read response
write(fd,cmd_buf2,sizeof(cdm_buf2);
read response
write(fd,cmd_buf3,sizeof(cdm_buf3);
read response
}
then i build the chat command also,
after i typed this command
#pppd /dev/ttyS0 115200 asyncmap auth connect 'chat -v "" AT OK ATE0 OK
AT+IPR=115200 OK AT+CGDCONT=1,\"IP\",\"bsnlnet.com\" OK ATD*99# CONNECT'
nocrtscts defaultroute modem updetach
then #logcat
set the dns1,and dns2 address .
On Mon, Jan 16, 2012 at 11:26 AM, Devindrappa Handraki <
[email protected]> wrote:
> Hi Venkat,
>
> Modify the RIL source code according to below mentioned link
>
>
> https://gitorious.org/0xdroid/hardware_ril/commit/ee75708cc786531c853e9ec7ffc28dd03658
>
> and build the RIL lib and load the RIL lib as mentioned below
>
> cd $ANDSOURCES/gingerbread/
> source build/envsetup.sh
> make clean
> mm libreference-ril TARGET_PRODUCT=beagleboard -j8
>
> adb push $GINGER/out/target/product/$PRODUCT/system/lib/libril.so /system/lib/
>
> adb push $GINGER/out/target/product/$PRODUCT/system/lib/libreference-ril.so
> /system/lib/
>
>
> then start the RIL daemon from init.rc
>
>
> service ril-daemon /system/bin/rild -l /system/lib/libreference-ril.so -- -d
> /dev/ttyO0
>
> socket rild stream 660 root radio
> socket rild-debug stream 660 radio system
> user root
> group radio cache inet misc audio vpn net_admin
>
> service pppd_gprs /etc/ppp/init.gprs-pppd.sh
>
> user root
> group radio cache inet misc
> disabled
>
>
> your RIL will work and you will be able to get signal strength, operator
> information and able to make call and receive call, but i am not able to
> access the Internet still i am exploring about Internet access.
>
> Can you share me how you able to access the internat without using RIL,
> detail about pppd and chat script i am not able to access the intenet.
>
>
> Thanks and regards
> Deindrappa Handraki
>
>
>
>
>
>
> On Sun, Jan 15, 2012 at 4:43 PM, Chaitanya <[email protected]>wrote:
>
>> @ Mark,
>> For HDMI out you can simply use TMDS serializers from the parlallel
>> interface of your platform. More to do with hardware rather than
>> android porting. Could you please make a new post rather than changing
>> the subject of a existing post.
>>
>> On Jan 14, 9:44 pm, "Mark" <[email protected]> wrote:
>> > Hello everyone:
>> >
>> > I am working on development of tvout on MHL and MINI-HDMI on the android
>> > phone. I could not find information for the SDK or android source
>> support
>> > for this development.
>> >
>> > Who can help me to know how to do?
>> >
>> > Mark.Liu
>>
>> --
>> unsubscribe: [email protected]
>> website: http://groups.google.com/group/android-porting
>>
>
>
--
thanks&Regards
k.v.raju
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
