Hi Amit, If your modem is a GSM modem then try with the existing code itself. For getting Signal Strength,Operator info,sending SMS and making voice calls the existing code might work as it is. The reference-ril folder is from where your ril library is b uilt .rild is for daemon.look into the makefiles for what is what.If for some reasons you have issues look into the reference-ril folder. It goes something like this the rildaemon(rild) makes requests from the RIL library. So you must make sure every request from rild is handled by your RIl library. The command interface you can use is defined in atchannel.h . Use any functions required from it in making your RIL library.The reference- ril.c or whatever your version has ,is what you would be spending the most time modifying.
I'm not aware of the modem you are using.Is it ZTE?For voice transmitting if you need to redirect audio to USB port like with huawei, Sony Erricsson and Qualcomm chip based modem.it has more to do with your audio framework and not ril. OR if your modem gives direct audio in and out ports like the SIMCOM,and other china modems ,then connect directly to it. On Jan 31, 11:51 am, Amit kumar Bag <[email protected]> wrote: > Hi, > I am having a snowball board and a STE external modem. I want to establish > communication with the STE modem and the snowball board like voice call > incoming and outgoing. For that I need to implement RIL. > > So can anyone suggest me the steps involve to do that. > > All ril related codes are available in the hardware/ril. > there are 3 folders in the hardware/ril (libril, reference-ril & rild). > > So which part I need to modify to establish the communication to STE > external modem ? > > Regards, > Amit Bag -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
