Hi Siva kumar,

please check my previous threads or just type in google search 'devkit8000
kvraju'


On Wed, May 9, 2012 at 11:44 AM, Siva kumar <[email protected]> wrote:

> Hi all,
>
> I have problem in making demo image woking with t inch LCD in
> devkit8000.
> The Android demo image is provided by the manufacturer in CD.
>
> In the CD in linux/demo/android/ i got the following image
>
> MLO          u-boot.bin_4.3  u-boot.bin_7  uImage_5.6
> RFS.tar.bz2  u-boot.bin_5.6  uImage_4.3    uImage_7
>
> To boot android image i followed the instruction given in the
> document. I made two partitions FAT32 and ext3.
>
> I copied the images using the following command
>
> cp MLO /media/LABEL1
> cp u-boot.bin_7 /media/LABEL1/u-boot
> cp uImage_7 /media/LABEL1/uImage
>
> tar jxvf RFS.tar.bz2 -C /media/LABEL2
>
> The bootargs i used  is
>
> bootcmd=mmcinit;fatload mmc 0 80300000 uImage;bootm 80300000
>
> bootargs=console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 init=/
> init rootdelay=1 video=omapfb:mode:7inch_LCD
>
> When i switch on the board, i am getting only the following log in
> cutecom
>
> \0xff
>
> Texas Instruments X-Loader 1.41
> Starting OS Bootloader...
>
>
> U-Boot 1.3.3-svn (Feb  6 2010 - 16:29:12)
>
> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
> OMAP3 DevKit8000 Board + LPDDR/NAND
> DRAM:  256 MB
> NAND:  256 MiB
> In:    serial
> Out:   serial
> Err:   serial
> Hit any key to stop autoboot:  3 \0x08\0x08\0x08 2 \0x08\0x08\0x08 1
> \0x08\0x08\0x08 0
> reading uImage
>
> 1877796 bytes read
> ## Booting kernel from Legacy Image at 80300000 ...
>   Image Name:   Linux-2.6.27-omap1-svn302-dirty2
>   Image Type:   ARM Linux Kernel Image (uncompressed)
>   Data Size:    1877732 Bytes =  1.8 MB
>   Load Address: 80008000
>   Entry Point:  80008000
>   Verifying Checksum ... OK
>   Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing
>
> Linux.........................................................................................................................
> done, booting the kernel.
>
> what is wrong in my steps.
>
> If anyone had successfully ported demo image in devkit8000, guide me
> to fix this
>
> Regards
> sivakumar
>
> --
> unsubscribe: [email protected]
> website: http://groups.google.com/group/android-porting
>



-- 
thanks&Regards
k.v.raju

-- 
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting

Reply via email to