Hardik, Did you ever get this working on the LogicPD SOM-LV? I'm running JB (4.1.2) on the LogicPD SOM Torpedo and having graphics issues.
Thanks, ben On Wednesday, December 26, 2012 12:39:16 AM UTC-5, Vishveshwar wrote: > > On Friday, December 21, 2012 5:54:56 AM UTC+5:30, Hardikprasad Patel wrote: >> >> >> Hi All, >> >> I am porting JB4.2_r1 on Omap DM3730(kernel is 3.0.8) (Modified SOM from >> Logic Pd). I have ported JB root file system on the development board and >> device boots up properly(EXCEPT TOUCH as i have not ported 5touch logic >> still now, But i can use mouse and keyboard with the hardware). I have >> performed the Benchmark using zerolab benchmarking app. i found the 3d/2d >> performance is comparatively poor(NOTE: there is no SGX available) >> compared to previous GB revision with kernel3.0.8 with SGX supported >> >> Now I ported/Integrated SGX (OMAPES=5.x) from Rowboat XM(Which supports >> the 2.6.xx kernel). when I turn on the device, device reboots >> stating the servicemanager killed 4times. >> I compared the rootfs(only changes are SGX Libs and test apps). if I >> remove the SGX libs from the rootfs then same device boots up properly. >> >> I am suspecting below: >> 1). My kernel is 3.0.8 and SGX(from Roaboat_XM) using OMAPES=5.x and >> rowboat_XM kernel is 2.6.3x which also supports OMAPES=5.x Can it cause >> this problem? >> >> I am not able to see the logcat output as device reboots. i got one log >> (attached here) which may help for some further analysis. >> > > From you log : > > E/logwrapper( 83): executing /system/bin/sgx/rc.pvr failed: Permission > denied > > > It seems that you filesystem is not setup correctly. You are getting > similar errors for other files too. > > How did you create the filesystem to flash on your card? > > -Vishveshwar > >> >> If anybody has faced this problem then please let me know. >> >> Regards, >> HARDIK PATEL >> >> >> >> On Monday, August 20, 2012 8:10:26 PM UTC-6, Georges wrote: >>> >>> Hi Khasim, >>> >>> Thanks for this great news. >>> >>> About SGX 3.x support, can you explain why it is not supported yet ? >>> >>> I am on AM3517 so use OMAPES=3.x. Can I expect to see it somedays ? >>> >>> BR, >>> Georges >>> >>> >>> >>> >>> "Syed Mohammed, Khasim " <[email protected]> Aug 20 04:21PM +0530 >>> >>> Hello all, >>> >>> We have released a preliminary version of JB release - Android 4.1.1 >>> for beagleboard and beaglebone platforms, the sources are now >>> available on http://gitorious.org/rowboat >>> >>> Beaglebone is tested with ULCD7 cape board. >>> >>> Please find more details on these wikis, >>> >>> http://code.google.com/p/rowboat/wiki/JellybeanOnBeagleboard_WithSGX >>> http://code.google.com/p/rowboat/wiki/JellybeanOnBeaglebone_WithSGX >>> >>> Thank you for all the support. >>> >>> Regards, >>> Khasim >>> >>> >>> >>> >>> Vishveshwar <[email protected]> Aug 20 04:46AM -0700 >>> >>> On Monday, August 20, 2012 4:52:32 PM UTC+5:30, Ilyes Gouta wrote: >>> >>> > Hi Khasim, >>> >>> > Is Beagleboard rev C3 also supported by rowboat JB? >>> >>> The SGX acceleration libraries are not available for Beagleboard C3 >>> revision (OMAPES=3.x). If you make a build without SGX, that should >>> work. >>> >>> -Vishveshwar >>> >>> -- -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
