Hi, Sorry for the late replay. This problem has been resolved. It was occurring because of the boot argument problem. If we do a setenv and saveenv of mmcargs including init=/init, it will take init file.
On Wednesday, July 16, 2014 1:24:36 PM UTC+5:30, Vishveshwar wrote: > > On Tuesday, July 8, 2014 11:23:00 AM UTC+5:30, deepak vijay wrote: >> >> Hello all, >> >> I am new to andorid and I am trying to port android 4.4.3_r1 to am43xx >> platform. >> I used am335x JB release as a reference. >> >> The kernel version that I am using is 3.12.10, and I applied all the >> android patches that is applied on 3.10 linux kernel to my kernel. >> >> And also I am able to add a new device (with reference of am335x >> directory in am335x JB release) to the device directory for am43xx and >> build it successfully. >> >> The bootargs is given below >> >> *bootargs=console=ttyO0,115200n8 androidboot.console=ttyO0 mem=256M >> root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait init=/init ip=off* >> *fdtfile=am437x-gp-evm.dtb* >> *bootcmd=mmc rescan ; fatload mmc 0 0x80F80000 am437x-gp-evm.dtb; fatload >> mmc 0 81000000 uImage ; bootm 80F80000 - 81000000* >> *uenvcmd=boot* >> >> >> And while booting I am getting the following problem. >> >> Please help me to solve this. >> >> >> Starting kernel ... >> >> [ 0.000000] Booting Linux on physical CPU 0x0 >> [ 0.000000] Initializing cgroup subsys cpu >> [ 0.000000] Initializing cgroup subsys cpuacct >> [ 0.000000] Linux version 3.12.10-ti2013.12.01 >> (mistral@mistral-Veriton-Series) (gcc version 4.6.x-go4 >> [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), >> cr=10c53c7d >> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >> instruction cache >> [ 0.000000] Machine: Generic AM43 (Flattened Device Tree), model: TI >> AM437x gp EVM >> [ 0.000000] cma: CMA: reserved 24 MiB at ae000000 >> [ 0.000000] Memory policy: ECC disabled, Data cache writeback >> [ 0.000000] CPU: All CPU(s) started in SVC mode. >> [ 0.000000] AM437x ES1.0 (sgx neon ) >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> Total pages: 259856 >> [ 0.000000] Kernel command line: console=ttyO0,115200n8 >> root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwat >> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) >> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 >> bytes) >> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 >> bytes) >> [ 0.000000] Memory: 1002844K/1045504K available (5763K kernel code, >> 565K rwdata, 1916K rodata, 349K i) >> [ 0.000000] Virtual kernel memory layout: >> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) >> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >> [ 0.000000] .text : 0xc0008000 - 0xc078805c (7681 kB) >> [ 0.000000] .init : 0xc0789000 - 0xc07e06d0 ( 350 kB) >> [ 0.000000] .data : 0xc07e2000 - 0xc086f4c0 ( 566 kB) >> [ 0.000000] .bss : 0xc086f4c0 - 0xc08a9de8 ( 235 kB) >> [ 0.000000] NR_IRQS:16 nr_irqs:16 16 >> [ 0.000000] GIC CPU mask not found - kernel will fail to boot. >> [ 0.000000] GIC CPU mask not found - kernel will fail to boot. >> [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz >> [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps >> every 178956ms >> [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz >> [ 0.000000] Console: colour dummy device 80x30 >> [ 0.000612] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) >> [ 0.119484] pid_max: default: 32768 minimum: 301 >> [ 0.119689] Security Framework initialized >> [ 0.119813] Mount-cache hash table entries: 512 >> [ 0.129908] Initializing cgroup subsys debug >> [ 0.129969] Initializing cgroup subsys freezer >> [ 0.130090] CPU: Testing write buffer coherency: ok >> [ 0.131035] Setting up static identity map for 0xc05a6910 - 0xc05a6980 >> [ 0.131274] L310 cache controller enabled >> [ 0.131314] l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x7e030000, >> Cache size: 262144 kB >> [ 0.132653] devtmpfs: initialized >> [ 0.136301] VFP support v0.3: implementor 41 architecture 3 part 30 >> variant 9 rev 4 >> [ 0.201285] omap_hwmod: dss_dispc: cannot be enabled for reset (3) >> [ 0.204570] omap_hwmod: dss_rfbi: cannot be enabled for reset (3) >> [ 0.205701] pinctrl core: initialized pinctrl subsystem >> [ 0.207099] regulator-dummy: no parameters >> [ 0.210728] NET: Registered protocol family 16 >> [ 0.215128] DMA: preallocated 256 KiB pool for atomic coherent >> allocations >> [ 0.218914] cpuidle: using governor ladder >> [ 0.218934] cpuidle: using governor menu >> [ 0.235208] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT >> exist in dt! >> [ 0.236899] platform 44e3e000.rtc: Cannot lookup hwmod 'rtc' >> [ 0.239082] OMAP GPIO hardware version 0.1 >> [ 0.254282] omap-gpmc 50000000.gpmc: GPMC revision 6.0 >> [ 0.254313] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 >> [ 0.255126] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT >> exist in dt! >> [ 0.257642] platform ocp2scp.0: FIXME: clock-name 'fck' DOES NOT exist >> in dt! >> [ 0.258012] platform ocp2scp.1: FIXME: clock-name 'fck' DOES NOT exist >> in dt! >> [ 0.258406] platform 48380000.omap_dwc3_1: FIXME: clock-name 'fck' >> DOES NOT exist in dt! >> [ 0.258810] platform 483c0000.omap_dwc3_2: FIXME: clock-name 'fck' >> DOES NOT exist in dt! >> [ 0.259196] platform 4832a000.dss: FIXME: clock-name 'fck' DOES NOT >> exist in dt! >> [ 0.259714] platform 4832a400.dispc: FIXME: clock-name 'fck' DOES NOT >> exist in dt! >> [ 0.260436] platform 4832a800.rfbi: FIXME: clock-name 'fck' DOES NOT >> exist in dt! >> [ 0.265670] No ATAGs? >> [ 0.265715] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 >> watchpoint registers. >> [ 0.265730] hw-breakpoint: maximum watchpoint size is 4 bytes. >> [ 0.300164] bio: create slab <bio-0> at 0 >> [ 0.320362] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine >> driver >> [ 0.321774] vmmcsd_fixed: 3300 mV >> [ 0.322562] wlan-en-regulator: 1800 mV >> [ 0.323159] evm_v3p3: 3300 mV >> [ 0.327676] vgaarb: loaded >> [ 0.329564] SCSI subsystem initialized >> [ 0.331582] usbcore: registered new interface driver usbfs >> [ 0.331839] usbcore: registered new interface driver hub >> [ 0.332138] usbcore: registered new device driver usb >> [ 0.333647] omap_i2c 44e0b000.i2c: could not find pctldev for node >> /pinmux@44e10800/pinmux_i2c0_pins,e >> [ 0.333690] platform 44e0b000.i2c: Driver omap_i2c requests probe >> deferral >> [ 0.333727] omap_i2c 4802a000.i2c: could not find pctldev for node >> /pinmux@44e10800/i2c1_pins, deferre >> [ 0.333746] platform 4802a000.i2c: Driver omap_i2c requests probe >> deferral >> [ 0.334129] media: Linux media interface: v0.10 >> [ 0.334387] Linux video capture interface: v2.00 >> [ 0.334812] pps_core: LinuxPPS API ver. 1 registered >> [ 0.334826] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 >> Rodolfo Giometti <[email protected]> >> [ 0.335011] PTP clock support registered >> [ 0.338653] Switched to clocksource timer1 >> [ 0.363853] NET: Registered protocol family 2 >> [ 0.364789] TCP established hash table entries: 8192 (order: 4, 65536 >> bytes) >> [ 0.365131] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) >> [ 0.365305] TCP: Hash tables configured (established 8192 bind 8192) >> [ 0.365687] TCP: reno registered >> [ 0.365706] UDP hash table entries: 512 (order: 1, 8192 bytes) >> [ 0.365760] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) >> [ 0.366114] NET: Registered protocol family 1 >> [ 0.366804] RPC: Registered named UNIX socket transport module. >> [ 0.366821] RPC: Registered udp transport module. >> [ 0.366829] RPC: Registered tcp transport module. >> [ 0.366836] RPC: Registered tcp NFSv4.1 backchannel transport module. >> [ 0.368228] NetWinder Floating Point Emulator V0.97 (double precision) >> [ 0.369387] PM: Loading am335x-pm-firmware.binbounce pool size: 64 >> pages >> [ 0.536222] VFS: Disk quotas dquot_6.5.2 >> [ 0.536322] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >> [ 0.537145] NFS: Registering the id_resolver key type >> [ 0.537269] Key type id_resolver registered >> [ 0.537281] Key type id_legacy registered >> [ 0.537330] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red >> Hat, Inc. >> [ 0.537548] msgmni has been set to 1484 >> [ 0.539982] NET: Registered protocol family 38 >> [ 0.540050] io scheduler noop registered >> [ 0.540060] io scheduler deadline registered >> [ 0.540091] io scheduler cfq registered (default) >> [ 0.541332] omap-ocp2scp ocp2scp.0: invalid resource >> [ 0.541385] omap-ocp2scp: probe of ocp2scp.0 failed with error -22 >> [ 0.542018] omap-ocp2scp ocp2scp.1: invalid resource >> [ 0.542058] omap-ocp2scp: probe of ocp2scp.1 failed with error -22 >> [ 0.546410] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 >> size 796 >> [ 0.556082] OMAP DSS rev 2.0 >> [ 0.561932] connector-hdmi connector.8: failed to find video source >> [ 0.561981] platform connector.8: Driver connector-hdmi requests probe >> deferral >> [ 0.590862] Console: switching to colour frame buffer device 100x30 >> [ 0.606007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >> [ 0.609858] omap_uart 44e09000.serial: No clock speed specified: using >> default:48000000 >> [ 0.610310] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 104, >> base_baud = 3000000) is a OMAP UART0 >> [ 1.401154] console [ttyO0] enabled >> [ 1.407286] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 >> [ 1.428016] brd: module loaded >> [ 1.438545] loop: module loaded >> [ 1.448925] mtdoops: mtd device (mtddev=name/number) must be supplied >> [ 1.461779] usbcore: registered new interface driver asix >> [ 1.467866] usbcore: registered new interface driver ax88179_178a >> [ 1.474637] usbcore: registered new interface driver cdc_ether >> [ 1.481127] usbcore: registered new interface driver r815x >> [ 1.487264] usbcore: registered new interface driver smsc95xx >> [ 1.493606] usbcore: registered new interface driver net1080 >> [ 1.499888] usbcore: registered new interface driver cdc_subset >> [ 1.506432] usbcore: registered new interface driver zaurus >> [ 1.512650] usbcore: registered new interface driver cdc_ncm >> [ 1.519483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 1.526447] ehci-pci: EHCI PCI platform driver >> [ 1.531532] ehci-omap: OMAP-EHCI Host Controller driver >> [ 1.538570] usbcore: registered new interface driver cdc_wdm >> [ 1.544959] usbcore: registered new interface driver usb-storage >> [ 1.553125] mousedev: PS/2 mouse device common for all mice >> [ 1.561043] input: matrix_keypad.10 as >> /devices/matrix_keypad.10/input/input0 >> [ 1.573200] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc >> as rtc0 >> [ 1.582328] i2c /dev entries driver >> [ 1.587649] vpfe-capture 48326000.vpfe: v4l2 device registered >> [ 1.594053] vpfe-capture 48326000.vpfe: Asynchronous subdevice >> registration >> [ 1.601629] vpfe-capture 48326000.vpfe: AM437x ISIF is registered with >> vpfe. >> [ 1.610015] vpfe-capture 48328000.vpfe: v4l2 device registered >> [ 1.616251] vpfe-capture 48328000.vpfe: Asynchronous subdevice >> registration >> [ 1.623877] vpfe-capture 48328000.vpfe: AM437x ISIF is registered with >> vpfe. >> [ 1.631757] Driver for 1-wire Dallas network protocol. >> [ 1.640937] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 >> sec >> [ 1.649868] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) >> initialised: [email protected] >> [ 1.661446] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:25 >> [ 1.668970] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:24 >> [ 1.709457] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:3 >> [ 1.716620] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:2 >> [ 1.723889] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz >> [ 1.769296] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:7 >> [ 1.776458] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:4 >> [ 1.866083] mmc0: host does not support reading read-only switch. >> assuming write-enable. >> [ 1.880261] mmc0: new high speed SDHC card at address e624 >> [ 1.887188] mmcblk0: mmc0:e624 SU04G 3.69 GiB >> [ 1.893560] ledtrig-cpu: registered to indicate activity on CPUs >> [ 1.902171] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:36 >> [ 1.909986] mmcblk0: p1 p2 >> [ 1.913453] omap-sham 53100000.sham: hw accel on OMAP rev 0.0 >> [ 1.921441] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz >> [ 1.934831] omap-aes 53501000.aes: OMAP AES hw accel rev: 0.1 >> [ 1.941274] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:5 >> [ 1.948551] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:6 >> [ 1.957409] omap-des 53701000.des: OMAP DES hw accel rev: 0.33 >> [ 1.963967] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:33 >> [ 1.972371] edma-dma-engine edma-dma-engine.0: allocated channel for >> 0:34 >> [ 1.983640] usbcore: registered new interface driver usbhid >> [ 1.989663] usbhid: USB HID core driver >> [ 1.994964] ashmem: initialized >> [ 1.999184] logger: created 256K log 'log_main' >> [ 2.004551] logger: created 256K log 'log_events' >> [ 2.010113] logger: created 256K log 'log_radio' >> [ 2.015477] logger: created 256K log 'log_system' >> [ 2.025298] oprofile: no performance counters >> [ 2.030713] oprofile: using timer interrupt. >> [ 2.035684] TCP: cubic registered >> [ 2.039294] Initializing XFRM netlink socket >> [ 2.044022] NET: Registered protocol family 17 >> [ 2.049144] NET: Registered protocol family 15 >> [ 2.053989] 8021q: 802.1Q VLAN Support v1.8 >> [ 2.058580] Key type dns_resolver registered >> [ 2.064204] cpu cpu0: cpu0 regulator not ready, retry >> [ 2.069884] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests >> probe deferral >> [ 2.078793] ThumbEE CPU extension supported. >> [ 2.094848] vdd_core: 920 <--> 1140 mV at 1100 mV >> [ 2.103427] vdd_mpu: 920 <--> 1375 mV at 1100 mV >> [ 2.110795] DCDC3: at 1500 mV >> [ 2.118426] LDO1: 1800 mV >> [ 2.122875] ov2659 0-0030: ov2659_probe: debug: 0 >> [ 2.159717] ov2659 0-0030: Sensor detection failed (3030, 0) >> [ 2.165837] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 100 kHz >> [ 2.175733] sii9022 1-003b: sil9022 HDMI Chip version = b0 >> [ 2.183706] ov2659 1-0030: ov2659_probe: debug: 0 >> [ 2.221625] ov2659 1-0030: Found OV2656 sensor >> [ 2.229098] vpfe-capture 48326000.vpfe: v4l2 sub device ov2659 >> registered >> [ 2.237004] vpfe-capture 48326000.vpfe: video device registered as >> video0 >> [ 2.244313] vpfe-capture 48326000.vpfe: vpfe0 capture driver >> initialized >> [ 2.251634] vpfe-capture 48326000.vpfe: sd[0]->entity is ed460e10 >> [ 2.258162] vpfe-capture 48326000.vpfe: video_dev->entity is ed2d7000 >> [ 2.265049] vpfe-capture 48326000.vpfe: source_pad:0 source->num_pads:1 >> [ 2.272110] vpfe-capture 48326000.vpfe: sink_pad:0 sink->num_pads:1 >> [ 2.279258] ov2659 1-0030: ov2659 sensor driver registered !! >> [ 2.285459] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 100 kHz >> [ 2.358673] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 >> [ 2.365184] davinci_mdio 4a101000.mdio: detected phy mask fffffffe >> [ 2.372747] libphy: 4a101000.mdio: probed >> [ 2.377044] davinci_mdio 4a101000.mdio: phy[0]: device >> 4a101000.mdio:00, driver unknown >> [ 2.386717] Detected MACID = 34:b1:f7:30:ed:c5 >> [ 2.394572] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 >> 00:00:00 UTC (946684800) >> [ 2.451242] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data >> mode. Opts: (null) >> [ 2.460069] VFS: Mounted root (ext4 filesystem) on device 179:2. >> [ 2.467868] devtmpfs: mounted >> *[ 2.473024] Freeing unused kernel memory: 348K (c0789000 - c07e0000)* >> *[ 2.483202] Kernel panic - not syncing: No init found. Try passing >> init= option to kernel. See Linux.* >> >> > Check if 'init' is really present in /dev/mmcblk0p2 and is executable. > > -Vishveshwar > -- -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
