I have an AM572x Evaluation Module TMDSEVM572X (ACTIVE) with me. I have successfully built and compiled the android on it.
The camera app is not working and the camera device/module is not detected even if present on the board. However, when I tried attaching an external USB Camera and installed a simple USB camera application to test it. To my surprise, the USB camera is working fine. As per this *thread* <https://e2e.ti.com/support/processors/f/791/p/681672/2511614?%20%20keyMatch=camera%20HAL%20am5728&tisearch=Search-EN-Everything> on TI Forum, AM572x does not support the camera module in Android SDK. But they have mentioned that it might be possible to get it working if I did changes around HAL. I have a few files related to the camera module present at the hardware/libhardware/modules/camera path. But there is no code for am57xx present inside the vendor directory. I don't have a lot of knowledge around HAL subsystem. I want to configure the board to detect the built-in camera rather than the external one. Based on the link of the thread I mentioned above, does anyone know how should I proceed here? Really appreciate your help. Thanks, Devashish -- -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/android-porting/da35abac-7466-4494-aa91-b0dfbb20f43c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
