Op 16 sep. 2011, om 21:08 heeft Jason Kridner het volgende geschreven: > The following changes since commit c6251231c603256eff6ccd0181c20bb182f9e03b: > > gstreamer-ti: use MEMARGS variable instead of hardcoding omap3 > config (2011-09-16 16:04:42 +0200) > > are available in the git repository at: > git://github.com/jadonk/meta-texasinstruments.git for-koen > > Jason Kridner (1): > [meta-ti] linux-3.0: use die-id for BeagleBoard-xM eth mac > > ...e-add-support-for-beagleboard-xM-revision.patch | 6 +- > ...OMAP3-beagle-add-support-for-expansionboa.patch | 6 +- > ...0003-HACK-OMAP3-beagle-switch-to-GPTIMER1.patch | 6 +- > .../0004-OMAP3-beagle-HACK-add-in-1GHz-OPP.patch | 6 +- > ...5-omap3-Add-basic-support-for-720MHz-part.patch | 6 +- > ...Set-dto-to-max-value-of-14-to-avoid-SD-Ca.patch | 33 ++++ > ...add-cpu-id-register-to-MAC-address-helper.patch | 89 ++++++++++ > ...BeagleBoard-Fix-up-random-or-missing-MAC-.patch | 156 ++++++++++++++++++ > ...3630-PRM-add-ABB-PRM-register-definitions.patch | 4 +- > ...P3-PM-VP-generalize-PRM-interrupt-helpers.patch | 4 +- > ...P3-PRM-add-tranxdone-IRQ-handlers-for-ABB.patch | 4 +- > ...P3-ABB-Adaptive-Body-Bias-structures-data.patch | 4 +- > ...-OMAP3-OPP-add-ABB-data-to-voltage-tables.patch | 4 +- > ...3-Voltage-add-ABB-data-to-voltage-domains.patch | 4 +- > ...3-ABB-initialization-transition-functions.patch | 4 +- > ...-OMAP3-Voltage-add-ABB-to-voltage-scaling.patch | 4 +- > ...01-Enabling-Hwmon-driver-for-twl4030-madc.patch | 4 +- > .../madc/0002-mfd-twl-core-enable-madc-clock.patch | 4 +- > ...nking-error-in-twl-common.c-for-OMAP2-3-4.patch | 4 +- > ...-introduce-function-to-free-cpufreq-table.patch | 6 +- > ...q-ensure-driver-initializes-after-cpufreq.patch | 4 +- > ...PUfreq-ensure-policy-is-fully-initialized.patch | 4 +- > .../0004-OMAP3-PM-CPUFreq-driver-for-OMAP3.patch | 4 +- > ...AP-PM-CPUFREQ-Fix-conditional-compilation.patch | 4 +- > ...-cpufreq-fixup-after-new-OPP-layer-merged.patch | 4 +- > ...q-Split-OMAP1-and-OMAP2PLUS-CPUfreq-drive.patch | 4 +- > ...cpufreq-Add-SMP-support-to-cater-OMAP4430.patch | 4 +- > ...pufreq-Fix-typo-when-attempting-to-set-mp.patch | 4 +- > ...P2-cpufreq-move-clk-name-decision-to-init.patch | 4 +- > ...-cpufreq-deny-initialization-if-no-mpudev.patch | 4 +- > ...012-OMAP2-cpufreq-dont-support-freq_table.patch | 4 +- > ...3-OMAP2-cpufreq-only-supports-OPP-library.patch | 4 +- > ...-OMAP2-cpufreq-put-clk-if-cpu_init-failed.patch | 4 +- > .../0015-OMAP2-cpufreq-fix-freq_table-leak.patch | 4 +- > ...eq-Remove-superfluous-check-in-target-for.patch | 4 +- > ...ufreq-notify-even-with-bad-boot-frequency.patch | 4 +- > ...req-Enable-all-CPUs-in-shared-policy-mask.patch | 4 +- > ...eq-update-lpj-with-reference-value-to-avo.patch | 4 +- > ...egulator-supply-definitions-in-mach-omap2.patch | 4 +- > ...style-supply.dev-assignments-common-in-hs.patch | 4 +- > ...parate-init_irq-functions-to-avoid-cpu_is.patch | 6 +- > ...parate-timer-init-functions-to-avoid-cpu_.patch | 8 +- > ...05-omap-Move-dmtimer-defines-to-dmtimer.h.patch | 4 +- > ...-subset-of-dmtimer-functions-into-inline-.patch | 4 +- > ...7-omap2-Use-dmtimer-macros-for-clockevent.patch | 4 +- > .../0008-omap2-Remove-gptimer_wakeup-for-now.patch | 4 +- > ...OMAP3-SR-make-notify-independent-of-class.patch | 4 +- > ...010-OMAP3-SR-disable-interrupt-by-default.patch | 4 +- > ...1-OMAP3-SR-enable-disable-SR-only-on-need.patch | 4 +- > .../0012-OMAP3-SR-fix-cosmetic-indentation.patch | 4 +- > ...ve-clocksource-and-timesource-and-initial.patch | 4 +- > ...-omap2-Use-dmtimer-macros-for-clocksource.patch | 4 +- > ...p2-Remove-omap2_gp_clockevent_set_gptimer.patch | 4 +- > ...e-timer-gp.c-into-timer.c-to-combine-time.patch | 4 +- > .../0017-omap-cleanup-NAND-platform-data.patch | 4 +- > ...omap-board-omap3evm-Fix-compilation-error.patch | 4 +- > .../0019-omap-mcbsp-Drop-SPI-mode-support.patch | 4 +- > ...map-mcbsp-Drop-in-driver-transfer-support.patch | 4 +- > .../voltdm/0021-omap2-fix-build-regression.patch | 4 +- > ...w-twl-common-for-common-TWL-configuration.patch | 6 +- > ...common-twl6030-configuration-to-twl-commo.patch | 4 +- > ...ve-common-twl-configuration-to-twl-common.patch | 4 +- > ...common-regulator-configuration-to-twl-com.patch | 4 +- > ...mcbsp-Remove-rx_-tx_word_length-variables.patch | 4 +- > .../0027-omap-mcbsp-Remove-port-number-enums.patch | 4 +- > .../0028-OMAP-dmtimer-add-missing-include.patch | 4 +- > ...P2-hwmod-Fix-smart-standby-wakeup-support.patch | 4 +- > ...4-hwmod-data-Add-MSTANDBY_SMART_WKUP-flag.patch | 4 +- > ...-Enable-module-in-shutdown-to-access-sysc.patch | 4 +- > ...-Do-not-write-the-enawakeup-bit-if-SYSC_H.patch | 4 +- > ...wmod-Remove-_populate_mpu_rt_base-warning.patch | 4 +- > ...4-OMAP2-hwmod-Fix-the-HW-reset-management.patch | 4 +- > ...-OMAP-hwmod-Add-warnings-if-enable-failed.patch | 4 +- > ...-Move-pr_debug-to-improve-the-readability.patch | 4 +- > ...use-a-null-structure-record-to-terminate-.patch | 4 +- > ...share-identical-omap_hwmod_addr_space-arr.patch | 4 +- > ...use-a-terminator-record-with-omap_hwmod_m.patch | 4 +- > ...share-identical-omap_hwmod_mpu_irqs-array.patch | 4 +- > ...use-a-terminator-record-with-omap_hwmod_d.patch | 4 +- > ...share-identical-omap_hwmod_dma_info-array.patch | 4 +- > ...share-identical-omap_hwmod_class-omap_hwm.patch | 4 +- > ...-data-Fix-L3-interconnect-data-order-and-.patch | 4 +- > ...-OMAP4-hwmod-data-Remove-un-needed-parens.patch | 4 +- > .../0046-OMAP4-hwmod-data-Fix-bad-alignement.patch | 4 +- > ...-data-Align-interconnect-format-with-regu.patch | 4 +- > ...48-OMAP4-clock-data-Add-sddiv-to-USB-DPLL.patch | 4 +- > ...-data-Remove-usb_host_fs-clkdev-with-NULL.patch | 4 +- > ...-data-Re-order-some-clock-nodes-and-struc.patch | 4 +- > ...ck-data-Fix-max-mult-and-div-for-USB-DPLL.patch | 4 +- > ...OMAP4-prcm-Fix-errors-in-few-defines-name.patch | 4 +- > ...MAP4-prm-Remove-wrong-clockdomain-offsets.patch | 4 +- > ...54-OMAP4-powerdomain-data-Fix-indentation.patch | 4 +- > ...move-RESTORE-macros-to-avoid-access-from-.patch | 4 +- > ...6-OMAP4-prcm_mpu-Fix-indent-in-few-macros.patch | 4 +- > ...domain-data-Fix-data-order-and-wrong-name.patch | 4 +- > ...evice-replace-_find_by_pdev-with-to_omap_.patch | 4 +- > ...OMAP-PM-remove-OMAP_PM_NONE-config-option.patch | 4 +- > ...-data-Remove-McASP2-McASP3-and-MMC6-clock.patch | 4 +- > ...MAP4-clock-data-Remove-UNIPRO-clock-nodes.patch | 4 +- > ...62-OMAP4-hwmod-data-Modify-DSS-opt-clocks.patch | 4 +- > ...itialise-sleep_switch-to-a-non-valid-valu.patch | 4 +- > ...domain-data-Fix-core-mem-states-and-missi.patch | 4 +- > ...-data-Keep-GPMC-clocks-always-enabled-and.patch | 4 +- > ...domain-data-Remove-unsupported-MPU-powerd.patch | 4 +- > ...AP4-hwmod-data-Change-DSS-main_clk-scheme.patch | 4 +- > ...et-hwmod-flags-to-only-allow-16-bit-acces.patch | 4 +- > ...ncrease-omap_i2c_dev_attr-flags-from-u8-t.patch | 4 +- > ...AP2-Introduce-I2C-IP-versioning-constants.patch | 4 +- > ...MAP2-create-omap-I2C-functionality-flags-.patch | 4 +- > ...ag-all-OMAP2-hwmod-defintions-with-I2C-IP.patch | 4 +- > ...dd-correct-functionality-flags-to-all-oma.patch | 4 +- > ...d-fix-the-i2c-reset-timeout-during-bootup.patch | 4 +- > ...evice-Create-clkdev-entry-for-hwmod-main_.patch | 4 +- > ...-data-Add-missing-divider-selection-for-a.patch | 4 +- > ...AP4-hwmod-data-Add-clock-domain-attribute.patch | 4 +- > ...OMAP2-hwmod-Init-clkdm-field-at-boot-time.patch | 4 +- > ...-Replace-CLKCTRL-absolute-address-with-of.patch | 4 +- > ...hwmod-Wait-the-idle-status-to-be-disabled.patch | 4 +- > ...-Replace-RSTCTRL-absolute-address-with-of.patch | 4 +- > ...eplace-warm-reset-API-with-the-offset-bas.patch | 4 +- > ...083-OMAP4-prm-Remove-deprecated-functions.patch | 4 +- > ...wmod-data-Add-PRM-context-register-offset.patch | 4 +- > ...-data-Add-modulemode-entry-in-omap_hwmod-.patch | 4 +- > ...m-Add-two-new-APIs-for-modulemode-control.patch | 4 +- > ...-Introduce-the-module-control-in-hwmod-co.patch | 4 +- > ...omain-Remove-redundant-call-to-pwrdm_wait.patch | 4 +- > ...domain-Add-2-APIs-to-control-clockdomain-.patch | 4 +- > ...0090-OMAP2-clockdomain-add-clkdm_in_hwsup.patch | 4 +- > ...P2-PM-idle-clkdms-only-if-already-in-idle.patch | 4 +- > ...domain-Add-per-clkdm-lock-to-prevent-conc.patch | 4 +- > ...-allow-per-SoC-clock-init-code-to-prevent.patch | 4 +- > ...-Follow-the-recommended-PRCM-module-enabl.patch | 4 +- > ...bugfs-node-to-show-the-summary-of-all-clo.patch | 4 +- > ...hwmod-remove-unused-voltagedomain-pointer.patch | 4 +- > ...ge-move-PRCM-mod-offets-into-VC-VP-struct.patch | 4 +- > ...ge-move-prm_irqst_reg-from-VP-into-voltag.patch | 4 +- > ...ge-start-towards-a-new-voltagedomain-laye.patch | 4 +- > ...ltage-rename-mpu-voltagedomain-to-mpu_iva.patch | 4 +- > ...MAP3-voltagedomain-data-add-wakeup-domain.patch | 4 +- > ...oltage-add-scalable-flag-to-voltagedomain.patch | 4 +- > ...domain-add-voltagedomain-to-struct-powerd.patch | 4 +- > ...oltage-domains-and-connect-to-powerdomain.patch | 4 +- > ...MAP3-powerdomain-data-add-voltage-domains.patch | 4 +- > ...MAP4-powerdomain-data-add-voltage-domains.patch | 4 +- > ...domain-add-voltage-domain-lookup-during-r.patch | 4 +- > ...ge-keep-track-of-powerdomains-in-each-vol.patch | 4 +- > ...ge-split-voltage-controller-VC-code-into-.patch | 4 +- > ...ge-move-VC-into-struct-voltagedomain-misc.patch | 4 +- > ...ge-enable-VC-bypass-scale-method-when-VC-.patch | 4 +- > ...ge-split-out-voltage-processor-VP-code-in.patch | 4 +- > ...pport-PMICs-with-separate-voltage-and-com.patch | 4 +- > ...RM-VP-functions-for-checking-clearing-VP-.patch | 4 +- > ...place-transaction-done-check-clear-with-V.patch | 4 +- > ...M-add-register-access-functions-for-VC-VP.patch | 4 +- > ...ge-convert-to-PRM-register-access-functio.patch | 4 +- > ...C-cleanup-i2c-slave-address-configuration.patch | 4 +- > ...eanup-PMIC-register-address-configuration.patch | 4 +- > ...pass-use-fields-from-VC-struct-instead-of.patch | 4 +- > ...-cleanup-voltage-setup-time-configuration.patch | 4 +- > ...ve-on-onlp-ret-off-command-configuration-.patch | 4 +- > ...AP3-VC-abstract-out-channel-configuration.patch | 4 +- > ...ge-domain-move-PMIC-struct-from-vdd_info-.patch | 4 +- > ...ke-I2C-config-programmable-with-PMIC-spec.patch | 4 +- > ...-handle-mutant-channel-config-for-OMAP4-M.patch | 4 +- > ...e-last-nominal-voltage-setting-to-get-cur.patch | 4 +- > ...eanup-move-VP-instance-into-voltdm-misc.-.patch | 4 +- > ...voltage-remove-unneeded-debugfs-interface.patch | 4 +- > ...ruct-omap_vp_common-replace-shift-with-__.patch | 4 +- > ...ve-SoC-specific-sys-clock-rate-retreival-.patch | 4 +- > ...ve-timing-calculation-config-into-VP-init.patch | 4 +- > ...eate-VP-helper-function-for-updating-erro.patch | 4 +- > ...0134-OMAP3-VP-remove-omap_vp_runtime_data.patch | 4 +- > ...ve-voltage-scale-function-pointer-into-st.patch | 4 +- > ...6-OMAP-VP-Explicitly-mask-VPVOLTAGE-field.patch | 4 +- > ...P3-VP-update_errorgain-return-error-if-VP.patch | 4 +- > ...P3-VP-remove-unused-omap_vp_get_curr_volt.patch | 4 +- > ...mbine-setting-init-voltage-into-common-fu.patch | 4 +- > ...ge-rename-scale-and-reset-functions-using.patch | 4 +- > ...ge-move-rename-curr_volt-from-vdd_info-in.patch | 4 +- > ...AP3-voltdm-final-removal-of-omap_vdd_info.patch | 4 +- > ...ge-rename-omap_voltage_get_nom_volt-voltd.patch | 4 +- > ...ge-update-nominal-voltage-in-voltdm_scale.patch | 4 +- > ...PM-TWL6030-fix-voltage-conversion-formula.patch | 4 +- > ...AP4-PM-TWL6030-fix-uv-to-voltage-for-0x39.patch | 4 +- > ...7-OMAP4-PM-TWL6030-address-0V-conversions.patch | 4 +- > ...-OMAP4-PM-TWL6030-fix-ON-RET-OFF-voltages.patch | 4 +- > .../0149-OMAP4-PM-TWL6030-add-cmd-register.patch | 4 +- > ...isplay-single-block-read-console-messages.patch | 6 +- > ...-omap_device-activate-dectivate-latency-m.patch | 6 +- > ...dd-bootarg-for-selecting-svideo-or-compos.patch | 6 +- > ...iminate-noisey-uncorrectable-error-messag.patch | 6 +- > .../sakoman/0005-video-add-timings-for-hd720.patch | 6 +- > ...-smsc911x-return-ENODEV-if-device-is-not-.patch | 6 +- > ...ut-touchscreen-ads7846-return-ENODEV-if-d.patch | 6 +- > ...08-Revert-omap2_mcspi-Flush-posted-writes.patch | 6 +-
Could you please respin it without the git header churn in most of the patches? And to be safe, please split the commit up in one per feature change, since some changes aren't in your commit message. _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
