Hello, On the first boot I was able to ssh into the beagleboard from another system. This failed on the next boot. The other images did not get to the login prompt systemd-gnome-image, and xfce-nm-image. On a fedora15 system I executed
bitbake -v virtual/kernel bitbake -v console-image bitbake -v systemd-gnome-image bitbake -v xfce-nm-image OE Build Configuration: BB_VERSION = "1.15.2" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "beagleboard" DISTRO = "angstrom" DISTRO_VERSION = "v2012.05" TUNE_FEATURES = "armv7a vfp neon cortexa8" TARGET_FPU = "vfp-neon" meta-angstrom = "angstrom-v2012.05-yocto1.2:671793fb1c971d05ce068230f362b2f87b19059d" meta-oe toolchain-layer meta-efl meta-gpe meta-gnome meta-xfce meta-initramfs = "denzil:24e1ebc21da20240a41984b7f5c90aa9bd65a7e8" meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731" meta-java = "master:3386ea6c96096f107f43f282f654e5afa456109e" meta-browser = "master:c47f59df2e723495679c751cbdf6a8c6adec4b6a" meta-mono = "master:83f8233b0498aadb18bf7605c3ba6c71d9e13a3a" meta-kde = "master:5b0882d951cfd71886d423c190faaa7c7f932333" meta-ti = "master:897596f437af47cb376ddcfb39518f6cb37a7684" meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d" meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee" meta-htc meta-nokia meta-openmoko meta-palm = "master:2b106be01228f64298d6cb338f93088806594344" meta-handheld = "master:1f05a15aceb4c3a19fa070463b58125b5658b2a9" meta-raspberrypi = "master:03d3e7e6325d919ff2c64c39edd9008d0a93c7a4" meta-intel meta-sugarbay meta-crownbay meta-emenlow meta-fishriver meta-fri2 meta-jasperforest meta-n450 = "master:f75f9b6f68473eb0efac802409608f8389be0030" meta = "denzil:8394dda5f12157c88005a788cd35421f498c9b82" commands used to transfer to sd card. cd /home/vidal/angstrom/setup-scripts/build/tmp-angstrom_v2012_05-eglibc/deploy/images/beagleboard/ cp MLO-beagleboard-2011.12 /media/boot/MLO cp u-boot-beagleboard-2011.12-r8.img /media/boot/u-boot.img cp uImage-3.2.18-r121b-beagleboard-20120625005852.bin /media/boot/uImage cp /home/vidal/uEnv.txt /media/boot/ mpurate=auto dvimode="hd720 omapfb.vram=0:8M,1:4M,2:4M" vram=16M optargs="consoleblank=0" console="tty0 console=ttyO2,115200n8" cd /media/Angstrom/ tar jxvf /home/vidal/angstrom/setup-scripts/build/tmp-angstrom_v2012_05-eglibc/deploy/images/beagleboard/Angstrom-console-image-eglibc-ipk-v2012.05-beagleboard.rootfs.tar.bz2 On the first boot I was able to login and execute ifup eth0 I got 192.168.0.153 Then from another system I able to ssh to 192.168.0.153 systemctl --all UNIT LOAD ACTIVE SUB JOB DESCRIPTION proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point dev-disk...0022ba5.device loaded active plugged /dev/disk/by-id/mmc-SD8GB_0x00022ba5 dev-disk...2dpart1.device loaded active plugged /dev/disk/by-id/mmc-SD8GB_0x00022ba5-part1 dev-disk...2dpart2.device loaded active plugged /dev/disk/by-id/mmc-SD8GB_0x00022ba5-part2 dev-disk...ngstrom.device loaded active plugged /dev/disk/by-label/Angstrom dev-disk...el-boot.device loaded active plugged /dev/disk/by-label/boot dev-disk...hsmmc.0.device loaded active plugged /dev/disk/by-path/platform-omap_hsmmc.0 dev-disk...2dpart1.device loaded active plugged /dev/disk/by-path/platform-omap_hsmmc.0-part1 dev-disk...2dpart2.device loaded active plugged /dev/disk/by-path/platform-omap_hsmmc.0-part2 dev-disk...797e254.device loaded active plugged /dev/disk/by-uuid/f95a15a9-939a-45b4-8adf-cd645797e254 dev-disk...x2d39AA.device loaded active plugged /dev/disk/by-uuid/FEC4-39AA dev-mmcblk0.device loaded active plugged /dev/mmcblk0 dev-mmcblk0p1.device loaded active plugged /dev/mmcblk0p1 dev-mmcblk0p2.device loaded active plugged /dev/mmcblk0p2 dev-tty0.device loaded active plugged /dev/tty0 dev-tty1.device loaded active plugged /dev/tty1 dev-tty10.device loaded active plugged /dev/tty10 dev-tty11.device loaded active plugged /dev/tty11 dev-tty12.device loaded active plugged /dev/tty12 dev-tty2.device loaded active plugged /dev/tty2 dev-tty3.device loaded active plugged /dev/tty3 dev-tty4.device loaded active plugged /dev/tty4 dev-tty5.device loaded active plugged /dev/tty5 dev-tty6.device loaded active plugged /dev/tty6 dev-tty7.device loaded active plugged /dev/tty7 dev-tty8.device loaded active plugged /dev/tty8 dev-tty9.device loaded active plugged /dev/tty9 dev-ttyO0.device loaded active plugged /dev/ttyO0 dev-ttyO1.device loaded active plugged /dev/ttyO1 dev-ttyO2.device loaded active plugged /dev/ttyO2 dev-ttyO3.device loaded active plugged /dev/ttyO3 dev-ttyS0.device loaded active plugged /dev/ttyS0 dev-ttyS1.device loaded active plugged /dev/ttyS1 dev-ttyS2.device loaded active plugged /dev/ttyS2 dev-ttyS3.device loaded active plugged /dev/ttyS3 sys-devi...cblk0p1.device loaded active plugged /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0007/block/mmcblk0/mmcblk0p1 sys-devi...cblk0p2.device loaded active plugged /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0007/block/mmcblk0/mmcblk0p2 sys-devi...mmcblk0.device loaded active plugged /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0007/block/mmcblk0 sys-devi...y-ttyO0.device loaded active plugged /sys/devices/platform/omap/omap_uart.0/tty/ttyO0 sys-devi...y-ttyO1.device loaded active plugged /sys/devices/platform/omap/omap_uart.1/tty/ttyO1 sys-devi...y-ttyO2.device loaded active plugged /sys/devices/platform/omap/omap_uart.2/tty/ttyO2 sys-devi...y-ttyO3.device loaded active plugged /sys/devices/platform/omap/omap_uart.3/tty/ttyO3 sys-devi...y-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0 sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1 sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2 sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3 sys-devi...et-eth0.device loaded active plugged ec00 sys-devi...ty-tty0.device loaded active plugged /sys/devices/virtual/tty/tty0 sys-devi...ty-tty1.device loaded active plugged /sys/devices/virtual/tty/tty1 sys-devi...y-tty10.device loaded active plugged /sys/devices/virtual/tty/tty10 sys-devi...y-tty11.device loaded active plugged /sys/devices/virtual/tty/tty11 sys-devi...y-tty12.device loaded active plugged /sys/devices/virtual/tty/tty12 sys-devi...ty-tty2.device loaded active plugged /sys/devices/virtual/tty/tty2 sys-devi...ty-tty3.device loaded active plugged /sys/devices/virtual/tty/tty3 sys-devi...ty-tty4.device loaded active plugged /sys/devices/virtual/tty/tty4 sys-devi...ty-tty5.device loaded active plugged /sys/devices/virtual/tty/tty5 sys-devi...ty-tty6.device loaded active plugged /sys/devices/virtual/tty/tty6 sys-devi...ty-tty7.device loaded active plugged /sys/devices/virtual/tty/tty7 sys-devi...ty-tty8.device loaded active plugged /sys/devices/virtual/tty/tty8 sys-devi...ty-tty9.device loaded active plugged /sys/devices/virtual/tty/tty9 sys-module-fuse.device loaded active plugged /sys/module/fuse -.mount loaded active mounted / dev-hugepages.mount loaded inactive dead Huge Pages File System dev-mqueue.mount loaded active mounted POSIX Message Queue File System etc-machine\x2did.mount loaded active mounted /etc/machine-id proc-sys...fmt_misc.mount loaded inactive dead Arbitrary Executable File Formats File System sys-fs-f...nections.mount loaded active mounted FUSE Control File System sys-kernel-config.mount loaded inactive dead Configuration File System sys-kernel-debug.mount loaded active mounted Debug File System tmp.mount loaded active mounted Temporary Directory systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch alsa-state.service loaded inactive dead alsa-state.service apmd.service loaded active exited LSB: Advanced Power Management daemon auditd.service error inactive dead auditd.service avahi-daemon.service loaded inactive dead Avahi mDNS/DNS-SD Stack connman.service loaded active running Connection service dbus.service loaded active running D-Bus System Message Bus dropbear.service masked inactive dead dropbear.service dropbear...:54509.service loaded active running SSH Per-Connection Server dropbearkey.service loaded active exited SSH Key Generation emergency.service loaded inactive dead Emergency Shell fsck-root.service loaded inactive dead File System Check on Root Device getty@tty1.service loaded active running Getty on tty1 halt.service loaded inactive dead Halt machineid.service loaded inactive dead Machine ID first boot configure ofono.service loaded active running ofono.service plymouth...t-wait.service error inactive dead plymouth-quit-wait.service plymouth-start.service error inactive dead plymouth-start.service portmap.service loaded active running LSB: The RPC portmapper poweroff.service loaded inactive dead Power-Off reboot.service loaded inactive dead Reboot remount-rootfs.service loaded active exited Remount Root FS rescue.service loaded inactive dead Rescue Shell run-postinsts.service loaded inactive dead Run pending postinsts serial-g...@ttyO2.service loaded active running Serial Getty on ttyO2 syslog.service masked inactive dead syslog.service systemd-...onsole.service loaded inactive dead Dispatch Password Requests to Console systemd-...d-wall.service loaded inactive dead Forward Password Requests to Wall systemd-binfmt.service loaded inactive dead Set Up Additional Binary Formats systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon systemd-journald.service loaded active running Journal Service systemd-logind.service loaded active running Login Service systemd-...s-load.service loaded active exited Load Kernel Modules systemd-...d-load.service loaded inactive dead Load Random Seed systemd-...d-save.service loaded inactive dead Save Random Seed systemd-...ollect.service loaded inactive dead Collect Read-Ahead Data systemd-...d-done.service loaded inactive dead Stop Read-Ahead Data Collection systemd-...replay.service loaded inactive dead Replay Read-Ahead Data systemd-...pi-vfs.service loaded active exited Remount API VFS systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service systemd-sysctl.service loaded active exited Apply Kernel Variables systemd-...-clean.service loaded inactive dead Cleanup of Temporary Directories systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories systemd-...nlevel.service loaded failed failed Notify Audit System and Update UTMP about System Runlevel Changes systemd-...utdown.service loaded inactive dead Notify Audit System and Update UTMP about System Shutdown systemd-...ssions.service loaded active exited Permit User Sessions timestamp.service loaded active exited Timestamping service udev-trigger.service loaded active exited udev Coldplug all Devices udev.service loaded active running udev Kernel Device Manager avahi-daemon.socket loaded inactive dead Avahi mDNS/DNS-SD Stack Activation Socket dbus.socket loaded active running D-Bus System Message Bus Socket dropbear.socket loaded active listening dropbear.socket syslog.socket loaded inactive dead Syslog Socket systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe systemd-journald.socket loaded active running Journal Socket systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket udev-control.socket loaded active listening udev Control Socket udev-kernel.socket loaded active running udev Kernel Socket basic.target loaded active active Basic System emergency.target loaded inactive dead Emergency Mode final.target loaded inactive dead Final Step getty.target loaded active active Login Prompts graphical.target loaded active active Graphical Interface local-fs-pre.target loaded active active Local File Systems (Pre) local-fs.target loaded active active Local File Systems multi-user.target loaded active active Multi-User network.target loaded inactive dead Network remote-fs.target loaded active active Remote File Systems rescue.target loaded inactive dead Rescue Mode rpcbind.target loaded active active RPC Port Mapper shutdown.target loaded inactive dead Shutdown sockets.target loaded active active Sockets swap.target loaded active active Swap sysinit.target loaded active active System Initialization syslog.target loaded inactive dead Syslog umount.target loaded inactive dead Unmount All Filesystems systemd-...ead-done.timer loaded inactive dead Stop Read-Ahead Data Collection 10s After Completed Startup systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. JOB = Pending job for the unit. 149 units listed. I execute opkg list-installed alsa-conf-base - 1.0.25-r1 alsa-state - 0.2.0-r2 alsa-states - 0.2.0-r2 alsa-utils-alsactl - 1.0.25-r2 alsa-utils-alsamixer - 1.0.25-r2 angstrom-feed-configs - v2012.05-r0 angstrom-libc-fixup-hack - 1.0-r0 angstrom-task-boot - 1.0-r4 angstrom-version - 2:v2012.05-r11 apm - 3.2.2-14-r2 apmd - 3.2.2-14-r2 avahi-autoipd - 0.6.31-r2.0 avahi-daemon - 0.6.31-r2.0 avahi-systemd - 0.6.31-r2.0 avahi-utils - 0.6.31-r2.0 base-files - 3.0.14-r87 base-passwd - 3.5.24-r0 bash - 4.2-r2 bluez4 - 4.99-r1 busybox - 1.19.4-r6 busybox-syslog - 1.19.4-r6 busybox-udhcpc - 1.19.4-r6 connman - 0.79-r3 connman-plugin-ethernet - 0.79-r3 connman-plugin-loopback - 0.79-r3 connman-plugin-wifi - 0.79-r3 connman-systemd - 0.79-r3 cpufrequtils - 008-r3 dbus-1 - 1.4.16-r3.0 dbus-systemd - 1.4.16-r3.0 dropbear - 2012.55-r2 dropbear-systemd - 2012.55-r2 e2fsprogs - 1.42.1-r0 e2fsprogs-badblocks - 1.42.1-r0 e2fsprogs-e2fsck - 1.42.1-r0 eglibc-binary-localedata-en-us - 2.12-r20 htop - 0.9-r1 iptables - 1.4.12.2-r0 iw - 3.2-r1 kernel - 3.2.18-r121b kernel-3.2.18 - 3.2.18-r121b kernel-image-3.2.18 - 3.2.18-r121b kernel-module-aes-generic - 3.2.18-r121b kernel-module-arc4 - 3.2.18-r121b kernel-module-autofs4 - 3.2.18-r121b kernel-module-bluetooth - 3.2.18-r121b kernel-module-bnep - 3.2.18-r121b kernel-module-cdc-acm - 3.2.18-r121b kernel-module-cdc-wdm - 3.2.18-r121b kernel-module-cfg80211 - 3.2.18-r121b kernel-module-cifs - 3.2.18-r121b kernel-module-crc-ccitt - 3.2.18-r121b kernel-module-g-ether - 3.2.18-r121b kernel-module-g-file-storage - 3.2.18-r121b kernel-module-g-mass-storage - 3.2.18-r121b kernel-module-g-serial - 3.2.18-r121b kernel-module-gadgetfs - 3.2.18-r121b kernel-module-hci-uart - 3.2.18-r121b kernel-module-hci-vhci - 3.2.18-r121b kernel-module-hidp - 3.2.18-r121b kernel-module-ip-tables - 3.2.18-r121b kernel-module-ipt-masquerade - 3.2.18-r121b kernel-module-iptable-filter - 3.2.18-r121b kernel-module-iptable-nat - 3.2.18-r121b kernel-module-mac80211 - 3.2.18-r121b kernel-module-michael-mic - 3.2.18-r121b kernel-module-nf-conntrack - 3.2.18-r121b kernel-module-nf-conntrack-ipv4 - 3.2.18-r121b kernel-module-nf-defrag-ipv4 - 3.2.18-r121b kernel-module-nf-nat - 3.2.18-r121b kernel-module-nls-utf8 - 3.2.18-r121b kernel-module-ppp-async - 3.2.18-r121b kernel-module-ppp-deflate - 3.2.18-r121b kernel-module-ppp-generic - 3.2.18-r121b kernel-module-ppp-mppe - 3.2.18-r121b kernel-module-regmap-spi - 3.2.18-r121b kernel-module-rfcomm - 3.2.18-r121b kernel-module-rfkill - 3.2.18-r121b kernel-module-rtc-twl - 3.2.18-r121b kernel-module-slhc - 3.2.18-r121b kernel-module-smsc95xx - 3.2.18-r121b kernel-module-snd - 3.2.18-r121b kernel-module-snd-mixer-oss - 3.2.18-r121b kernel-module-snd-page-alloc - 3.2.18-r121b kernel-module-snd-pcm - 3.2.18-r121b kernel-module-snd-pcm-oss - 3.2.18-r121b kernel-module-snd-soc-core - 3.2.18-r121b kernel-module-snd-soc-twl4030 - 3.2.18-r121b kernel-module-snd-timer - 3.2.18-r121b kernel-module-soundcore - 3.2.18-r121b kernel-module-usbserial - 3.2.18-r121b kernel-module-x-tables - 3.2.18-r121b kernel-module-zd1211rw - 3.2.18-r121b libacl1 - 2.2.51-r3 libapm1 - 3.2.2-14-r2 libasound2 - 1.0.25-r1 libattr1 - 2.4.46-r4 libavahi-client3 - 0.6.31-r2.0 libavahi-common3 - 0.6.31-r2.0 libavahi-core7 - 0.6.31-r2.0 libblkid1 - 2.21-r5 libc6 - 2.12-r28 libcap2 - 2.22-r3 libcom-err2 - 1.42.1-r0 libdaemon0 - 0.14-r0 libdbus-1-3 - 1.4.16-r3.0 libe2p2 - 1.42.1-r0 libexpat1 - 2.0.1-r1 libffi5 - 3.0.10-r0 libformw5 - 5.9-r9.1 libgcc1 - 4.5-r49+svnr184907 libgcrypt11 - 1.5.0-r0 libglib-2.0-0 - 1:2.30.3-r1 libgnutls26 - 2.12.17-r6.0 libgpg-error0 - 1.10-r1 libkmod2 - 7-r3 liblzma5 - 5.0.3-r1 libmenuw5 - 5.9-r9.1 libncurses5 - 5.9-r9.1 libncursesw5 - 5.9-r9.1 libnl-3-200 - 3.2.3-r0 libnl-genl-3-200 - 3.2.3-r0 libnss-mdns - 0.10-r4 libopkg1 - 1:0.1.8+svnr633-r9.0 libpam - 1.1.5-r3 libpam-runtime - 1.1.5-r3 libpanelw5 - 5.9-r9.1 libreadline6 - 6.2-r2 libss2 - 1.42.1-r0 libsysfs2 - 2.1.0-r3 libsystemd-daemon0 - v44-45-g3eff420-r27 libsystemd-id128-0 - v44-45-g3eff420-r27 libsystemd-journal0 - v44-45-g3eff420-r27 libsystemd-login0 - v44-45-g3eff420-r27 libtasn1-3 - 2.11-r0 libtinfo5 - 5.9-r9.1 libudev0 - 182-r0 libusb-0.1-4 - 1:0.1.3-r4 libusb-1.0-0 - 1.0.8-r4 libuuid1 - 2.21-r5 libwrap0 - 7.6-r9 libz1 - 1.2.6-r1 locale-base-en-us - 2.12-r20 module-init-tools - 3.16-r0 module-init-tools-depmod - 3.16-r0 ncurses-terminfo - 5.9-r9.1 ncurses-terminfo-base - 5.9-r9.1 netbase - 4.47-r2 ofono - 1.5-r1 openssh-sftp - 5.9p1-r5 openssh-sftp-server - 5.9p1-r5 opkg - 1:0.1.8+svnr633-r9.0 opkg-config-base - 1.0-r1 pam-plugin-deny - 1.1.5-r3 pam-plugin-env - 1.1.5-r3 pam-plugin-faildelay - 1.1.5-r3 pam-plugin-group - 1.1.5-r3 pam-plugin-lastlog - 1.1.5-r3 pam-plugin-limits - 1.1.5-r3 pam-plugin-mail - 1.1.5-r3 pam-plugin-motd - 1.1.5-r3 pam-plugin-nologin - 1.1.5-r3 pam-plugin-permit - 1.1.5-r3 pam-plugin-rootok - 1.1.5-r3 pam-plugin-securetty - 1.1.5-r3 pam-plugin-shells - 1.1.5-r3 pam-plugin-unix - 1.1.5-r3 pam-plugin-warn - 1.1.5-r3 portmap - 6.0-r7 ppp - 2.4.5-r4 ppp-dialin - 0.1-r8 procps - 3.2.8-r7 shadow - 4.1.4.3-r8 shadow-securetty - 4.1.4.3-r1 strace - 4.6-r1 sysfsutils - 2.1.0-r3 systemd - v44-45-g3eff420-r27 systemd-compat-units - 1.0-r15 systemd-serialgetty - 1.0-r3 sysvinit-pidof - 2.88dsf-r6 task-base - 1.0-r73 task-base-3g - 1.0-r73 task-base-alsa - 1.0-r73 task-base-apm - 1.0-r73 task-base-bluetooth - 1.0-r73 task-base-extended - 1.0-r73 task-base-ipv6 - 1.0-r73 task-base-nfs - 1.0-r73 task-base-ppp - 1.0-r73 task-base-smbfs - 1.0-r73 task-base-usbgadget - 1.0-r73 task-base-usbhost - 1.0-r73 task-base-vfat - 1.0-r73 task-base-wifi - 1.0-r73 task-base-zeroconf - 1.0-r73 task-basic - 1.0-r8 task-boot - 1.0-r57 task-distro-base - 1.0-r73 task-machine-base - 1.0-r73 timestamp-service - 1.0-r0 tinylogin - 1.4-r8 tzdata - 2012b-r0 udev - 182-r0 udev-systemd - 182-r0 udev-utils - 182-r0 update-alternatives-cworth - 1:0.1.8+svnr633-r9.0 update-modules - 1.0-r13 update-rc.d - 0.7-r5 usbutils - 0.91-r3 usbutils-ids - 0.91-r3 util-linux-agetty - 2.21-r5 util-linux-blkid - 2.21-r5 util-linux-fsck - 2.21-r5 util-linux-mount - 2.21-r5 util-linux-swaponoff - 2.21-r5 util-linux-umount - 2.21-r5 wireless-tools - 1:29-r4 wpa-supplicant - 0.7.3-r8 wpa-supplicant-cli - 0.7.3-r8 wpa-supplicant-passphrase - 0.7.3-r8 I executed dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.18 (vi...@ws008.swbell.net) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #1 Sun Jun 24 21:24:04 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Beagle expansionboard: none [ 0.000000] Beagle second expansionboard: none [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 125440 [ 0.000000] free_area_init_node: node 0, pgdat c07e03f0, node_mem_map c08a0000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 124416 pages, LIFO batch:31 [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 124416 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 consoleblank=0 mpurate=auto buddy=none buddy2=none camera=none vram=16M omapfb.mode=dvi:hd720 omapfb.vram=0:8M,1:4M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 490MB = 490MB total [ 0.000000] Memory: 486344k/486344k available, 37944k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0741cec (7400 kB) [ 0.000000] .init : 0xc0742000 - 0xc0788000 ( 280 kB) [ 0.000000] .data : 0xc0788000 - 0xc07e2710 ( 362 kB) [ 0.000000] .bss : 0xc07e2734 - 0xc089f854 ( 757 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000610] Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080) [ 0.032989] pid_max: default: 32768 minimum: 301 [ 0.033233] Security Framework initialized [ 0.033294] AppArmor: AppArmor initialized [ 0.033538] Mount-cache hash table entries: 512 [ 0.033935] Initializing cgroup subsys cpuacct [ 0.033996] Initializing cgroup subsys memory [ 0.034057] Initializing cgroup subsys devices [ 0.034088] Initializing cgroup subsys freezer [ 0.034088] Initializing cgroup subsys blkio [ 0.034149] Initializing cgroup subsys perf_event [ 0.034240] CPU: Testing write buffer coherency: ok [ 0.035308] devtmpfs: initialized [ 0.038940] print_constraints: dummy: [ 0.039215] NET: Registered protocol family 16 [ 0.039428] GPMC revision 5.0 [ 0.040863] OMAP GPIO hardware version 2.5 [ 0.042205] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.043487] OMAP3 Beagle Rev: xM C [ 0.046569] Reprogramming SDRC clock to 400000000 Hz [ 0.046630] dpll3_m2_clk rate change failed: -22 [ 0.048461] Found NAND on CS0 [ 0.048492] Registering NAND on CS0 [ 0.048797] gpio_request: gpio--22 (DVI reset) status -22 [ 0.048828] Unable to get DVI reset GPIO [ 0.048980] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.052520] omap-mcbsp.2: alias fck already exists [ 0.052764] omap-mcbsp.3: alias fck already exists [ 0.053894] OMAP DMA hardware revision 5.0 [ 0.060729] bio: create slab <bio-0> at 0 [ 0.061950] SCSI subsystem initialized [ 0.063140] usbcore: registered new interface driver usbfs [ 0.063323] usbcore: registered new interface driver hub [ 0.063507] usbcore: registered new device driver usb [ 0.064239] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz [ 0.066650] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.066772] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.067260] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.067626] _omap_mux_init_gpio: Could not set gpio192 [ 0.070404] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.070831] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.071228] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.072906] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.073669] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 0.074127] print_constraints: VDAC: 1800 mV normal standby [ 0.074554] print_constraints: VAUX2_4030: 1800 mV normal [ 0.074951] print_constraints: VDVI: 1800 mV normal standby [ 0.075469] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.075775] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz [ 0.076110] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz [ 0.077239] NetLabel: Initializing [ 0.077270] NetLabel: domain hash size = 128 [ 0.077270] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.077362] NetLabel: unlabeled traffic allowed by default [ 0.077392] Switching to clocksource 32k_counter [ 0.090728] AppArmor: AppArmor Filesystem Enabled [ 0.102752] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.107421] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.107452] musb-hdrc: MHDRC RTL version 1.800 [ 0.107482] musb-hdrc: setup fifo_mode 5 [ 0.107482] musb-hdrc: 28/31 max ep, 8192/16384 memory [ 0.107818] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.108184] NET: Registered protocol family 2 [ 0.108520] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.109313] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.109710] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.109924] TCP: Hash tables configured (established 16384 bind 16384) [ 0.109954] TCP reno registered [ 0.109985] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.110015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.110382] NET: Registered protocol family 1 [ 0.110778] RPC: Registered named UNIX socket transport module. [ 0.110809] RPC: Registered udp transport module. [ 0.110839] RPC: Registered tcp transport module. [ 0.110870] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.111145] omap_dsp_init: 600000 bytes @ 9ea00000 [ 0.112792] audit: initializing netlink socket (disabled) [ 0.112884] type=2000 audit(0.117:1): initialized [ 0.322357] VFS: Disk quotas dquot_6.5.2 [ 0.322723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.326202] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.326263] fuse init (API version 7.17) [ 0.328369] Btrfs loaded [ 0.328430] msgmni has been set to 949 [ 0.329925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.330078] io scheduler noop registered [ 0.330108] io scheduler deadline registered [ 0.330169] io scheduler cfq registered (default) [ 0.331115] OMAP DSS rev 2.0 [ 0.333618] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.334838] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.335144] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.335510] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.060913] console [ttyO2] enabled [ 1.065032] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 1.072937] [drm] Initialized drm 1.1.0 20060810 [ 1.085449] brd: module loaded [ 1.092742] loop: module loaded [ 1.097412] twl4030_madc twl4030_madc: clk disabled, enabling [ 1.104949] omap2-nand driver initializing [ 1.109588] No NAND device found [ 1.113189] No NAND device found [ 1.116760] OneNAND driver initializing [ 1.121459] usbcore: registered new interface driver cdc_ether [ 1.127655] usbcore: registered new interface driver rndis_host [ 1.133880] cdc_ncm: 04-Aug-2011 [ 1.137329] usbcore: registered new interface driver cdc_ncm [ 1.143676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.163452] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.169708] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.177581] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.194763] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.200866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.207977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.215545] usb usb1: Product: OMAP-EHCI Host Controller [ 3.221099] usb usb1: Manufacturer: Linux 3.2.18 ehci_hcd [ 3.226776] usb usb1: SerialNumber: ehci-omap.0 [ 3.232208] hub 1-0:1.0: USB hub found [ 3.236175] hub 1-0:1.0: 3 ports detected [ 3.265045] Initializing USB Mass Storage driver... [ 3.270263] usbcore: registered new interface driver usb-storage [ 3.276580] USB Mass Storage support registered. [ 3.281524] usbcore: registered new interface driver libusual [ 3.287689] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 3.294921] mousedev: PS/2 mouse device common for all mice [ 3.302185] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 [ 3.313964] i2c /dev entries driver [ 3.318176] Linux media interface: v0.10 [ 3.322448] lirc_dev: IR Remote Control driver registered, major 249 [ 3.329193] Driver for 1-wire Dallas network protocol. [ 3.335266] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.341827] twl4030_wdt twl4030_wdt: Failed to register misc device [ 3.348419] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 3.356048] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 3.365356] cpuidle: using governor ladder [ 3.369659] cpuidle: using governor menu [ 3.373809] sdhci: Secure Digital Host Controller Interface driver [ 3.380249] sdhci: Copyright(c) Pierre Ossman [ 3.562011] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 3.602935] gpio_request: gpio-0 (mmc_wp) status -16 [ 3.602966] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16 [ 3.609741] Registered led device: beagleboard::usr0 [ 3.609832] Registered led device: beagleboard::usr1 [ 3.612243] Registered led device: beagleboard::pmu_stat [ 3.612609] usbcore: registered new interface driver usbhid [ 3.618438] usbhid: USB HID core driver [ 3.622436] oprofile: hardware counters not available [ 3.627716] oprofile: using timer interrupt. [ 3.632934] TCP cubic registered [ 3.637115] NET: Registered protocol family 10 [ 3.643371] NET: Registered protocol family 17 [ 3.648223] Registering the dns_resolver key type [ 3.653198] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 3.661224] ThumbEE CPU extension supported. [ 3.665710] Registering SWP/SWPB emulation handler [ 3.674468] sr_init: No PMIC hook to init smartreflex [ 3.679931] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.688171] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.696350] SmartReflex Class3 initialized [ 3.704040] clock: disabling unused clocks to save power [ 3.710449] registered taskstats version 1 [ 3.765838] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 3.772857] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.781250] hub 1-2:1.0: USB hub found [ 3.800354] Console: switching to colour frame buffer device 160x45 [ 3.821319] hub 1-2:1.0: 5 ports detected [ 3.829071] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.836791] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.845520] Waiting for root device /dev/mmcblk0p2... [ 4.132629] usb 1-2.1: new high-speed USB device number 3 using ehci-omap [ 4.257934] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.265319] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.305419] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.316802] mmc0: new high speed SDHC card at address 0007 [ 4.323120] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 4.331268] mmcblk0: p1 p2 [ 4.359161] usb 1-2.2: new low-speed USB device number 4 using ehci-omap [ 4.419830] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.433288] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.456878] devtmpfs: mounted [ 4.465362] Freeing init memory: 280K [ 4.496185] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 4.508361] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.520874] usb 1-2.2: Product: USB Optical Mouse [ 4.530670] usb 1-2.2: Manufacturer: PixArt [ 4.544494] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1 [ 4.562438] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 [ 4.663818] usb 1-2.3: new low-speed USB device number 5 using ehci-omap [ 4.797607] usb 1-2.3: New USB device found, idVendor=0a81, idProduct=0101 [ 4.810455] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.823608] usb 1-2.3: Product: USB Keyboard [ 4.833435] usb 1-2.3: Manufacturer: CHESEN [ 4.850463] input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input2 [ 4.871673] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input0 [ 4.898712] input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.1/input/input3 [ 4.917633] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input1 [ 5.419433] Bluetooth: Core ver 2.16 [ 5.430023] NET: Registered protocol family 31 [ 5.441833] Bluetooth: HCI device and connection manager initialized [ 5.455810] Bluetooth: HCI socket layer initialized [ 5.468383] Bluetooth: L2CAP socket layer initialized [ 5.480773] Bluetooth: SCO socket layer initialized >[ 5.572570] udevd[57]: starting version 182 [ 5.621337] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.691406] Bluetooth: RFCOMM TTY layer initialized [ 5.702484] Bluetooth: RFCOMM socket layer initialized [ 5.713623] Bluetooth: RFCOMM ver 1.11 [ 6.702911] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 8.460083] twl_rtc twl_rtc: Power up reset detected. [ 8.473175] smsc95xx v1.0.4 [ 8.482788] twl_rtc twl_rtc: Enabling TWL-RTC. [ 8.499511] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 8.571533] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 36:54:fc:6a:d1:1a [ 8.589538] usbcore: registered new interface driver smsc95xx [ 19.101470] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.154998] nf_conntrack version 0.5.0 (7603 buckets, 30412 max) [ 19.337768] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.815399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.823944] smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 64.624053] usb 1-2.2: USB disconnect, device number 4 [ 66.140533] usb 1-2.2: new low-speed USB device number 6 using ehci-omap [ 66.270141] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 66.277526] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 66.289001] usb 1-2.2: Product: USB Optical Mouse [ 66.297698] usb 1-2.2: Manufacturer: PixArt [ 66.312835] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input4 [ 66.330169] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 [ 126.318664] usb 1-2.2: USB disconnect, device number 6 [ 127.835723] usb 1-2.2: new low-speed USB device number 7 using ehci-omap [ 127.965576] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 127.977325] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.989440] usb 1-2.2: Product: USB Optical Mouse [ 127.998901] usb 1-2.2: Manufacturer: PixArt [ 128.014251] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input5 [ 128.033050] generic-usb 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 I was collecting the data on serial port of the beagleboard. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.18 (vi...@ws008.swbell.net) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #1 Sun Jun 24 21:24:04 MDT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Beagle expansionboard: none [ 0.000000] Beagle second expansionboard: none [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 125440 [ 0.000000] free_area_init_node: node 0, pgdat c07e03f0, node_mem_map c08a0000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 124416 pages, LIFO batch:31 [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 124416 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 consoleblank=0 mpurate=auto buddy=none buddy2=none camera=none vram=16M omapfb.mode=dvi:hd720 omapfb.vram=0:8M,1:4M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 490MB = 490MB total [ 0.000000] Memory: 486344k/486344k available, 37944k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0741cec (7400 kB) [ 0.000000] .init : 0xc0742000 - 0xc0788000 ( 280 kB) [ 0.000000] .data : 0xc0788000 - 0xc07e2710 ( 362 kB) [ 0.000000] .bss : 0xc07e2734 - 0xc089f854 ( 757 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000610] Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080) [ 0.032989] pid_max: default: 32768 minimum: 301 [ 0.033233] Security Framework initialized [ 0.033294] AppArmor: AppArmor initialized [ 0.033538] Mount-cache hash table entries: 512 [ 0.033935] Initializing cgroup subsys cpuacct [ 0.033996] Initializing cgroup subsys memory [ 0.034057] Initializing cgroup subsys devices [ 0.034088] Initializing cgroup subsys freezer [ 0.034088] Initializing cgroup subsys blkio [ 0.034149] Initializing cgroup subsys perf_event [ 0.034240] CPU: Testing write buffer coherency: ok [ 0.035308] devtmpfs: initialized [ 0.038940] print_constraints: dummy: [ 0.039215] NET: Registered protocol family 16 [ 0.039428] GPMC revision 5.0 [ 0.040863] OMAP GPIO hardware version 2.5 [ 0.042205] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.043487] OMAP3 Beagle Rev: xM C [ 0.046569] Reprogramming SDRC clock to 400000000 Hz [ 0.046630] dpll3_m2_clk rate change failed: -22 [ 0.048461] Found NAND on CS0 [ 0.048492] Registering NAND on CS0 [ 0.048797] gpio_request: gpio--22 (DVI reset) status -22 [ 0.048828] Unable to get DVI reset GPIO [ 0.048980] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.052520] omap-mcbsp.2: alias fck already exists [ 0.052764] omap-mcbsp.3: alias fck already exists [ 0.053894] OMAP DMA hardware revision 5.0 [ 0.060729] bio: create slab <bio-0> at 0 [ 0.061950] SCSI subsystem initialized [ 0.063140] usbcore: registered new interface driver usbfs [ 0.063323] usbcore: registered new interface driver hub [ 0.063507] usbcore: registered new device driver usb [ 0.064239] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz [ 0.066650] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.066772] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.067260] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.067626] _omap_mux_init_gpio: Could not set gpio192 [ 0.070404] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.070831] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.071228] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.072906] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.073669] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 0.074127] print_constraints: VDAC: 1800 mV normal standby [ 0.074554] print_constraints: VAUX2_4030: 1800 mV normal [ 0.074951] print_constraints: VDVI: 1800 mV normal standby [ 0.075469] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.075775] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz [ 0.076110] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz [ 0.077239] NetLabel: Initializing [ 0.077270] NetLabel: domain hash size = 128 [ 0.077270] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.077362] NetLabel: unlabeled traffic allowed by default [ 0.077392] Switching to clocksource 32k_counter [ 0.090728] AppArmor: AppArmor Filesystem Enabled [ 0.102752] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.107421] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.107452] musb-hdrc: MHDRC RTL version 1.800 [ 0.107482] musb-hdrc: setup fifo_mode 5 [ 0.107482] musb-hdrc: 28/31 max ep, 8192/16384 memory [ 0.107818] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.108184] NET: Registered protocol family 2 [ 0.108520] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.109313] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.109710] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.109924] TCP: Hash tables configured (established 16384 bind 16384) [ 0.109954] TCP reno registered [ 0.109985] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.110015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.110382] NET: Registered protocol family 1 [ 0.110778] RPC: Registered named UNIX socket transport module. [ 0.110809] RPC: Registered udp transport module. [ 0.110839] RPC: Registered tcp transport module. [ 0.110870] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.111145] omap_dsp_init: 600000 bytes @ 9ea00000 [ 0.112792] audit: initializing netlink socket (disabled) [ 0.112884] type=2000 audit(0.117:1): initialized [ 0.322357] VFS: Disk quotas dquot_6.5.2 [ 0.322723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.326202] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.326263] fuse init (API version 7.17) [ 0.328369] Btrfs loaded [ 0.328430] msgmni has been set to 949 [ 0.329925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.330078] io scheduler noop registered [ 0.330108] io scheduler deadline registered [ 0.330169] io scheduler cfq registered (default) [ 0.331115] OMAP DSS rev 2.0 [ 0.333618] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.334838] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.335144] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.335510] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.060913] console [ttyO2] enabled [ 1.065032] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 1.072937] [drm] Initialized drm 1.1.0 20060810 [ 1.085449] brd: module loaded [ 1.092742] loop: module loaded [ 1.097412] twl4030_madc twl4030_madc: clk disabled, enabling [ 1.104949] omap2-nand driver initializing [ 1.109588] No NAND device found [ 1.113189] No NAND device found [ 1.116760] OneNAND driver initializing [ 1.121459] usbcore: registered new interface driver cdc_ether [ 1.127655] usbcore: registered new interface driver rndis_host [ 1.133880] cdc_ncm: 04-Aug-2011 [ 1.137329] usbcore: registered new interface driver cdc_ncm [ 1.143676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.163452] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.169708] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.177581] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.194763] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.200866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.207977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.215545] usb usb1: Product: OMAP-EHCI Host Controller [ 3.221099] usb usb1: Manufacturer: Linux 3.2.18 ehci_hcd [ 3.226776] usb usb1: SerialNumber: ehci-omap.0 [ 3.232208] hub 1-0:1.0: USB hub found [ 3.236175] hub 1-0:1.0: 3 ports detected [ 3.265045] Initializing USB Mass Storage driver... [ 3.270263] usbcore: registered new interface driver usb-storage [ 3.276580] USB Mass Storage support registered. [ 3.281524] usbcore: registered new interface driver libusual [ 3.287689] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 3.294921] mousedev: PS/2 mouse device common for all mice [ 3.302185] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 [ 3.313964] i2c /dev entries driver [ 3.318176] Linux media interface: v0.10 [ 3.322448] lirc_dev: IR Remote Control driver registered, major 249 [ 3.329193] Driver for 1-wire Dallas network protocol. [ 3.335266] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.341827] twl4030_wdt twl4030_wdt: Failed to register misc device [ 3.348419] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 3.356048] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 3.365356] cpuidle: using governor ladder [ 3.369659] cpuidle: using governor menu [ 3.373809] sdhci: Secure Digital Host Controller Interface driver [ 3.380249] sdhci: Copyright(c) Pierre Ossman [ 3.562011] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 3.602935] gpio_request: gpio-0 (mmc_wp) status -16 [ 3.602966] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16 [ 3.609741] Registered led device: beagleboard::usr0 [ 3.609832] Registered led device: beagleboard::usr1 [ 3.612243] Registered led device: beagleboard::pmu_stat [ 3.612609] usbcore: registered new interface driver usbhid [ 3.618438] usbhid: USB HID core driver [ 3.622436] oprofile: hardware counters not available [ 3.627716] oprofile: using timer interrupt. [ 3.632934] TCP cubic registered [ 3.637115] NET: Registered protocol family 10 [ 3.643371] NET: Registered protocol family 17 [ 3.648223] Registering the dns_resolver key type [ 3.653198] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 3.661224] ThumbEE CPU extension supported. [ 3.665710] Registering SWP/SWPB emulation handler [ 3.674468] sr_init: No PMIC hook to init smartreflex [ 3.679931] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.688171] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.696350] SmartReflex Class3 initialized [ 3.704040] clock: disabling unused clocks to save power [ 3.710449] registered taskstats version 1 [ 3.765838] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 3.772857] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.781250] hub 1-2:1.0: USB hub found [ 3.800354] Console: switching to colour frame buffer device 160x45 [ 3.821319] hub 1-2:1.0: 5 ports detected [ 3.829071] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.836791] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.845520] Waiting for root device /dev/mmcblk0p2... [ 4.132629] usb 1-2.1: new high-speed USB device number 3 using ehci-omap [ 4.257934] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.265319] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.305419] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.316802] mmc0: new high speed SDHC card at address 0007 [ 4.323120] mmcblk0: mmc0:0007 SD8GB 7.42 GiB [ 4.331268] mmcblk0: p1 p2 [ 4.359161] usb 1-2.2: new low-speed USB device number 4 using ehci-omap [ 4.419830] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.433288] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.456878] devtmpfs: mounted [ 4.465362] Freeing init memory: 280K [ 4.496185] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 4.508361] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.520874] usb 1-2.2: Product: USB Optical Mouse [ 4.530670] usb 1-2.2: Manufacturer: PixArt [ 4.544494] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1 [ 4.562438] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 [ 4.663818] usb 1-2.3: new low-speed USB device number 5 using ehci-omap [ 4.797607] usb 1-2.3: New USB device found, idVendor=0a81, idProduct=0101 [ 4.810455] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.823608] usb 1-2.3: Product: USB Keyboard [ 4.833435] usb 1-2.3: Manufacturer: CHESEN [ 4.850463] input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input2 [ 4.871673] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input0 [ 4.898712] input: CHESEN USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.1/input/input3 [ 4.917633] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-ehci-omap.0-2.3/input1 [ 5.419433] Bluetooth: Core ver 2.16 [ 5.430023] NET: Registered protocol family 31 [ 5.441833] Bluetooth: HCI device and connection manager initialized [ 5.455810] Bluetooth: HCI socket layer initialized [ 5.468383] Bluetooth: L2CAP socket layer initialized [ 5.480773] Bluetooth: SCO socket layer initialized >[ 5.572570] udevd[57]: starting version 182 [ 5.621337] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.691406] Bluetooth: RFCOMM TTY layer initialized [ 5.702484] Bluetooth: RFCOMM socket layer initialized [ 5.713623] Bluetooth: RFCOMM ver 1.11 [ 6.702911] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 8.460083] twl_rtc twl_rtc: Power up reset detected. [ 8.473175] smsc95xx v1.0.4 [ 8.482788] twl_rtc twl_rtc: Enabling TWL-RTC. [ 8.499511] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 8.571533] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 36:54:fc:6a:d1:1a [ 8.589538] usbcore: registered new interface driver smsc95xx [ 19.101470] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.154998] nf_conntrack version 0.5.0 (7603 buckets, 30412 max) [ 19.337768] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.815399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.823944] smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 64.624053] usb 1-2.2: USB disconnect, device number 4 [ 66.140533] usb 1-2.2: new low-speed USB device number 6 using ehci-omap [ 66.270141] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 66.277526] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 66.289001] usb 1-2.2: Product: USB Optical Mouse [ 66.297698] usb 1-2.2: Manufacturer: PixArt [ 66.312835] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input4 [ 66.330169] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 [ 126.318664] usb 1-2.2: USB disconnect, device number 6 [ 127.835723] usb 1-2.2: new low-speed USB device number 7 using ehci-omap [ 127.965576] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 127.977325] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.989440] usb 1-2.2: Product: USB Optical Mouse [ 127.998901] usb 1-2.2: Manufacturer: PixArt [ 128.014251] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input5 [ 128.033050] generic-usb 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.2/input0 Any help will be apprecaited. Regards, _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
