On Wed, Nov 27, 2013 at 3:21 PM, Koen Kooi <k...@dominion.thruhere.net>wrote:
> > Op 27 nov. 2013, om 00:22 heeft Brandon Stafford <bran...@rascalmicro.com> > het volgende geschreven: > > > Hi all, > > > > I'm trying to build Angstrom based on Yocto 1.4 'Dylan' for a SAMA5D3 > board. > > You're not doing that actually, if you where, you would be using > https://github.com/angstrom-distribution/setup-scripts and following the > instructions in the README. Sorry. To explain, the board I'm targeting is a new board based on the SAMA5D3, so I didn't think setting MACHINE would work properly. Sounds like I was wrong. > > > I have modified bblayers.conf: > > > > BBLAYERS ?= " \ > > /home/ubuntu/poky/meta-angstrom \ > > /home/ubuntu/poky/meta-openembedded/meta-oe \ > > /home/ubuntu/poky/meta-openembedded/meta-systemd \ > > /home/ubuntu/poky/meta-atmel \ > > /home/ubuntu/poky/meta \ > > /home/ubuntu/poky/meta-yocto \ > > /home/ubuntu/poky/meta-yocto-bsp \ > > The above is an incomplete collection of incompatible layers, don't do > that. > How can I tell whether a layer is compatible or not? Brandon _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
