I downloaded the 20070512 files to install on my C3100 (currently
running OZ 3.5.4.1, and prior to that an older Angstrom release.
When I run the installer (you know, hold OK, option 4, yada yada yada),
the white screen with SHARP in red comes up, and then scrolls off the
screen with the following errors (typed in not copy/paste):
INIT: version 2.78 booting
INIT: Entering run level: 4
INIT: cannot execute "/sbin/getty"
{the above repeats 6 times)
INIT: Id "s0" respawning too fast: disabled for 5 minutes
INIT: no more processes
the hdimage1.tgz's md5 checks out OK when I re-downloaded...
Any ideas? Here's what's on my CF card (which I used before OK)
[EMAIL PROTECTED]:/media/cf# md5sum g* h* u* z*
34b647d6444a9a38e269c2793c7d0bf2 gnu-tar
112602208d81683c1fd765c94291f6ba hdimage1.tgz
0015f9b8070664474283575767d5d28f updater.sh
62cd7ce45d53ce65f386e2d0641e9715 zImage.bin
I've also tried reflashing from a NAND backup with a Sharp image, and no
joy. Also, trying to use the magic D+B poweron sequence simply gives me
the "run level 4" message and after a long long time it simply reports
"Error!! HDD is not initialised" as if it's simply trying to boot normal
Sharp linux.
thanks
Paul
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
