"Hans Henry von Tresckow" <[EMAIL PROTECTED]> wrote: > Here is the output for df -k on my poodle: > > [EMAIL PROTECTED]:~# df -k /dev/mtdblock2 > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mtdblock2 22528 8232 14296 37% / > [EMAIL PROTECTED]:~# df -k /dev/mtdblock3 > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mtdblock3 35840 35368 472 99% /home > > as you can see, /dev/mtdblock2 is just shy of 23MB. Just to rule out a > hardware issue, I'd flash the console Image to see if that works.
Console image boots fine, but this doesn't rule out bad flash near the end, does it? Seems unlikely, however...a simpler explanation is afforded by the size of the partitions and the size of the image... > As > far as booting a X11 image, you would need to set up some way of > running / on SD. I personaly build a custom kernel with the > commandline pointing / to /dev/mmcblk0p1. I have a standard console > image installed in flash and I use kexec to boot my custom kernels. Hmmm, ok. Looks like it's time to check out and build an OE toolchain again... -- Andrew J. Barr Woke up in my clothes again this morning, don't know exactly where I am... _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
