Hi all, I would like to install Angstrom Linux, found in directory http://www.angstrom-distribution.org/unstable/images/h3900/20070929/ onto my iPAQ h3950. Where can I find a manual/tutorial or help for that? Some time ago Familiar-Linux was on it, then I uploaded in "load root" way the Angstrom-x11-image-glibc-ipk-2007.9-test-20070929-h3900.rootfs.jffs2 image-file, but I left in a certain state the boot-loader (pxa-bootldr) of Familiar. However the the new system does not work. After Launching the bootloader the display screen remains dark, in the system-log is geting:
boot> ser_con serial console at your service... boot> set linuxargs "root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200" setting param <linuxargs> to value <root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200> boot> boot booting jffs2... booting boot/zImage from partition >root< loaded file of size = 0x0012F968 at location 0xA0008000 kernel partition base A0008000 kernel_magic=E1A00000 kernel_region_words[9]=016F2818 Linux ELF flash_imgstart=50040000 size=01F80000 dest=A0000000 offset=00008000 MMU Control=00000079 MMU PIDVAM=00000000 Skipping kernel copy by request. A0008000: E1A00000 A0008004: E1A00000 A0008008: E1A00000 A000800C: E1A00000 A0008010: E1A00000 A0008014: E1A00000 A0008018: E1A00000 A000801C: E1A00000 A0008020: EA000002 A0008024: 016F2818 root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001 Using mach_type 000000CB setting boot parameters to root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200 Making core tag at A0000100 Making cmdline tag at A0000114 Making mem32 tag at A00001D4 command line is: mtdparts=ipaq:[EMAIL PROTECTED](bootldr)ro,[EMAIL PROTECTED](root),[EMAIL PROTECTED](asset) root=/dev/mtdblock1 rootfstype=jffs2 co nsole=ttyS00,115200 rootfstype=jffs2 Disabling LCD controller linuxEntryPoint=A0008000 Booting Linux image Uncompressing Linux.................................................................................. done, booting the kernel. [ 0.000000] Linux version 2.6.21-hh16 ([EMAIL PROTECTED]) (gcc version 4.1.2) #1 PREEMPT Sun Sep 16 18:36:53 EEST 2007 [ 0.000000] CPU: XScale-PXA250 [69052904] revision 4 (ARMv5TE), cr=0000397f [ 0.000000] Machine: HP iPAQ H3900 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Memory clock: 99.53MHz (*27) [ 0.000000] Run Mode clock: 199.07MHz (*2) [ 0.000000] Turbo Mode clock: 398.13MHz (*2.0, active) [ 0.000000] CPU0: D VIVT undefined 5 cache [ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets [ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets [ 0.000000] Built 1 zonelists. Total pages: 16256 [ 0.000000] Kernel command line: mtdparts=ipaq:[EMAIL PROTECTED](bootldr)ro,[EMAIL PROTECTED](root),[EMAIL PROTECTED](asset) root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200 rootfstype=jffs2 [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.090000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.100000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.110000] Memory: 64MB = 64MB total [ 0.110000] Memory: 62208KB available (2336K code, 242K data, 88K init) [ 0.340000] Mount-cache hash table entries: 512 [ 0.340000] CPU: Testing write buffer coherency: ok [ 0.350000] NET: Registered protocol family 16 [ 0.380000] asic2: using irq 178-193 on irq 33 [ 0.380000] SoC: registering asic2-gpio [ 0.390000] SoC: registering asic2-keys [ 0.390000] SoC: registering asic2-spi [ 0.400000] SoC: registering asic2-adc [ 0.400000] SoC: registering asic2-owm [ 0.420000] Time: pxa_timer clocksource has been installed. [ 0.420000] NET: Registered protocol family 2 [ 0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.530000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.540000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.550000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.550000] TCP reno registered [ 0.620000] PXA CPU frequency change support initialized [ 0.620000] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.630000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. [ 0.640000] io scheduler noop registered [ 0.650000] io scheduler anticipatory registered (default) [ 0.650000] io scheduler deadline registered [ 0.660000] Corgi Backlight Driver Initialized. [ 0.670000] Console: switching to colour frame buffer device 80x40 [ 0.800000] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART [ 0.810000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART [ 0.820000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART [ 0.830000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART [ 0.830000] pxa2xx-ir-serial: Initialized [ 0.840000] input: asic2 ts as /class/input/input0 [ 0.850000] pxa2xx_udc: version 4-May-2005 [ 0.850000] ether gadget: using random self ethernet address [ 0.860000] ether gadget: using random host ethernet address [ 0.870000] usb0: Ethernet Gadget, version: May Day 2005 [ 0.870000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk [ 0.880000] usb0: MAC 2a:33:49:1c:e0:2b [ 0.880000] usb0: HOST MAC 9a:2a:af:9e:a5:9f [ 0.890000] usb0: RNDIS ready [ 0.890000] input: gpio-keys as /class/input/input1 [ 0.900000] input: asic2 keyboard as /class/input/input2 [ 0.910000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0 [ 0.920000] APM Battery Driver [ 0.960000] TCP cubic registered [ 0.960000] NET: Registered protocol family 1 [ 0.960000] NET: Registered protocol family 17 [ 0.970000] XScale DSP coprocessor detected. [ 0.970000] sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01 00:06:01 (361) [ 0.980000] asic3_mmc: ASIC3 MMC/SD Driver, controller at 0x14000000 [ 0.990000] h3900_mmc: clock enabled [ 1.560000] Root-NFS: No NFS server available, giving up. [ 1.560000] VFS: Unable to mount root fs via NFS, trying floppy. [ 1.570000] No filesystem could mount root, tried: jffs2 [ 1.570000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) What should I do in different way to work it? Thanks for all. _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
