Hello Kresimir, Thursday, January 3, 2008, 8:11:14 PM, you wrote:
> Thursday, January 3, 2008, 3:48:28 AM, you wrote: > > I've installed angstrom unstable before and 2007.12 half an hour ago > and > > both suffer from the same problem: neither display my ipaq's main > battery > > status. > If you describe what you mean by the above, we could move on with > that. Otherwise, I only can tell that everything works great for me. > yes, it is as I described. > here's a list of files and their current state in > /sys/class/power_supply/ds2760-battery.0 / > charge_empty: 5000 > charge_full: 1842000 > charge_full_design:1440000 > charge_now:2932000 (and keeps decreasing, which is logical :) > current_now:-406250 > status: Discharging > temp: 287 > type: Battery > uevent: ? > voltage_now: 4069920 > apm output: > Off-line, battery status high: 100% (7:10:00) > so, as you can see, the battery works, everything is displayed correctly in > the driver, it's just that APM doesn't recognise the battery and hence is > not displayed in GPE. Based on the above, I don't see how APM doesn't recognize battery. It's just your charge somehow higher than the full value! Also, can confirm that for me, everything works great - apm tool output and matchbox applet. If something to come up out of this thread, it should be continued in bugtracker. [] -- Best regards, Paul mailto:[EMAIL PROTECTED] _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
