Hello, Sorry, this'll be a bit long since it has debug info...
I've had problems with the OPIE installkit (blank screen with cursor). So, I started with the r9 console installkit, installed, got networking and ssh working, then did a ipkg update, upgrade and install task-opie-everything. I have the same problem, but now I can debug. Here's what I get when I do a /etc/init.d/opie restart: -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= # /etc/init.d/opie restart Stopping Opie... You seem to already have a /home/root/Applications directory. Assuming it is the Opie Applications directory. Exiting. Starting Opie.... ODevice() - found 'Hardware : SHARP Husky' Zaurus::init() Zaurus::init() - Hinge Sensor Initialization successfully completed Zaurus::rotation() OInputSystem::OInputSystem() OInputSystem::synchronize() OInputSystem::synchronize() - checking if '/dev/input/event0' is a valid input system node... 'yes' [(ok)] OInputDevice::OInputDevice( '/dev/input/event0' ) OInputSystem::synchronize() - checking if '/dev/input/event1' is a valid input system node... 'yes' [(ok)] OInputDevice::OInputDevice( '/dev/input/event1' ) OInputSystem::synchronize() - checking if '/dev/input/event2' is a valid input system node... 'yes' [(ok)] OInputDevice::OInputDevice( '/dev/input/event2' ) OInputSystem::synchronize() - checking if '/dev/input/touchscreen0' is a valid input system node... 'yes' [(ok)] OInputDevice::OInputDevice( '/dev/input/touchscreen0' ) OInputSystem::synchronize() - checking if '/dev/input/uinput' is a valid input system node... 'no' [Invalid argument] OInputSystem::synchronize() done Zaurus::rotation() - hinge sensor = 0 Zaurus::rotation() - returning '0' Zaurus::init() - Using the 2.6 OpenZaurus HAL on a Zaurus SL-C760 or SL-C860 Zaurus::rotation() Zaurus::rotation() - hinge sensor = 0 Zaurus::rotation() - returning '0' OGlobal::creating global configuration instance. OConfig::OConfig() <unknown>: ODevice reports transformation to be 0 Zaurus::rotation() Zaurus::rotation() - hinge sensor = 0 Zaurus::rotation() - returning '0' <unknown>: setting QWS_DISPLAY to 'W100:Rot0:0' qt_init() - starting in daemon mode... # -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Looking at /etc/log/opie-qss.log... -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Waiting for qcop to startup: 0 ... Waiting for qcop to startup: 1 ... Waiting for qcop to startup: 2 ... Waiting for qcop to startup: 3 ... Waiting for qcop to startup: 4 ... Waiting for qcop to startup: 5 ... Waiting for qcop to startup: 6 ... Waiting for qcop to startup: 7 ... Waiting for qcop to startup: 8 ... Waiting for qcop to startup: 9 ... Waiting for qcop to startup: a ... Waiting for qcop to startup: b ... Waiting for qcop to startup: c ... Waiting for qcop to startup: d ... Waiting for qcop to startup: e ... Waiting for qcop to startup: f ... QSocket::writeBlock: Socket is not open QSocket::writeBlock: Socket is not open QSocket::writeBlock: Socket is not open QSocket::writeBlock: Socket is not open No Qt/Embedded server appears to be running. If you want to run qss as a server, add the "-qws" command-line option. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= I do not see qss running. I've tried running it manually but it does not stay running and doesn't seem to complain. Any thoughts or am I doomed to never get this running? Any other c760 users willing to give me a ROM backup? Thanks. -Chad _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
