I created an image using the Narcissus online builder. I added several optional packages including Apache, python, gdb, the native SDK, and the bootloader. When I try to boot from this image on my Beagleboard xM, it locks up during init. Here is the output:
Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42) OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #4fee00029ff800000168300f1601300f Hit any key to stop autoboot: 3 2 1 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 3203088 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Angstrom/2.6.32/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3203024 Bytes = 3.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux................................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue Jul 26 10:56:56 CEST 2011 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=auto buddy=none camera=lbcm3m1 vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait [ 0.000000] Beagle expansionboard: none [ 0.000000] Beagle cameraboard: lbcm3m1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 256MB 256MB = 512MB total [ 0.000000] Memory: 500352KB available (5900K code, 673K data, 204K init, 0K highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:402 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 525.17 BogoMIPS (lpj=2052096) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] tmpfs: No value for mount option 'mode' [ 0.000000] devtmpfs: initialized [ 0.000000] regulator: core version 0.5 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] OMAP3 Beagle Rev: xM C [ 0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1 [ 0.000000] Found NAND on CS0 [ 0.000000] Registering NAND on CS0 [ 0.000000] Unable to get DVI reset GPIO [ 0.000000] omap_init_mbox: platform not supported [ 8.990936] OMAP DMA hardware revision 5.0 [ 8.997253] bio: create slab <bio-0> at 0 [ 8.998474] SCSI subsystem initialized [ 8.999786] usbcore: registered new interface driver usbfs [ 8.999908] usbcore: registered new interface driver hub [ 9.000061] usbcore: registered new device driver usb [ 9.000427] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz [ 9.003112] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 9.003143] twl4030: power (irq 373) chaining IRQs 376..383 [ 9.003448] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 9.005126] regulator: VUSB1V5: 1500 mV normal standby [ 9.005340] regulator: VUSB1V8: 1800 mV normal standby [ 9.005554] regulator: VUSB3V1: 3100 mV normal standby [ 9.006805] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 9.007171] regulator: VMMC1: 1850 <--> 3150 mV normal standby [ 9.007446] regulator: VDAC: 1800 mV normal standby [ 9.007659] regulator: VPLL2: 1800 mV normal standby [ 9.007965] regulator: VSIM: 1800 <--> 3000 mV normal standby [ 9.008270] regulator: VAUX3: 1800 mV normal standby [ 9.008636] regulator: VAUX4: 1800 mV normal standby [ 9.008789] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz [ 9.021392] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz [ 9.022583] Switching to clocksource 32k_counter [ 9.031616] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 [ 9.035430] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 9.035461] musb_hdrc musb_hdrc: MUSB HDRC host driver [ 9.035583] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 [ 9.035705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.035736] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.035736] usb usb1: Product: MUSB HDRC host driver [ 9.035766] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd [ 9.035766] usb usb1: SerialNumber: musb_hdrc [ 9.036376] hub 1-0:1.0: USB hub found [ 9.036407] hub 1-0:1.0: 1 port detected [ 9.037445] NET: Registered protocol family 2 [ 9.037658] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 9.038208] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 9.038665] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 9.038879] TCP: Hash tables configured (established 16384 bind 16384) [ 9.038879] TCP reno registered [ 9.038909] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 9.038940] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 9.039184] NET: Registered protocol family 1 [ 9.039611] RPC: Registered udp transport module. [ 9.039611] RPC: Registered tcp transport module. [ 9.039642] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.040496] omap-iommu omap-iommu.0: isp registered [ 9.042175] VFS: Disk quotas dquot_6.5.2 [ 9.042297] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.043334] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.044128] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 9.044921] msgmni has been set to 977 [ 9.048675] alg: No test for stdrng (krng) [ 9.048980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 9.048980] io scheduler noop registered [ 9.049011] io scheduler deadline registered [ 9.049163] io scheduler cfq registered (default) [ 9.108825] OMAP DSS rev 2.0 [ 9.108886] OMAP DISPC rev 3.0 [ 9.108947] OMAP VENC rev 2 [ 9.109161] OMAP DSI rev 1.0 [ 9.445831] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 9.464538] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 [ 9.482604] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 [ 9.500671] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 [ 10.066955] console [ttyS2] enabled [ 10.077117] brd: module loaded [ 10.083404] loop: module loaded [ 10.087982] omap2-nand driver initializing [ 10.092376] No NAND device found!!! [ 10.096069] No NAND device found!!! [ 10.100585] usbcore: registered new interface driver catc [ 10.106079] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 10.112152] usbcore: registered new interface driver kaweth [ 10.117767] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 10.125396] usbcore: registered new interface driver pegasus [ 10.131103] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 10.138092] usbcore: registered new interface driver rtl8150 [ 10.143890] usbcore: registered new interface driver asix [ 10.149414] usbcore: registered new interface driver cdc_ether [ 10.155364] usbcore: registered new interface driver dm9601 [ 10.161071] usbcore: registered new interface driver smsc95xx [ 10.166961] usbcore: registered new interface driver gl620a [ 10.172668] usbcore: registered new interface driver net1080 [ 10.178436] usbcore: registered new interface driver plusb [ 10.184051] usbcore: registered new interface driver rndis_host [ 10.190124] usbcore: registered new interface driver cdc_subset [ 10.196166] usbcore: registered new interface driver zaurus [ 10.201843] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 10.209899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.216735] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 10.222717] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2 [ 10.230316] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 10.249359] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 10.255249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.262115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.269409] usb usb2: Product: OMAP-EHCI Host Controller [ 10.274749] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd [ 10.280212] usb usb2: SerialNumber: ehci-omap.0 [ 10.285430] hub 2-0:1.0: USB hub found [ 10.289276] hub 2-0:1.0: 3 ports detected [ 10.319763] Initializing USB Mass Storage driver... [ 10.324859] usbcore: registered new interface driver usb-storage [ 10.330932] USB Mass Storage support registered. [ 10.335937] mice: PS/2 mouse device common for all mice [ 10.341583] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 10.349395] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 10.360107] i2c /dev entries driver [ 10.364196] Linux video capture interface: v2.00 [ 10.369140] omap-iommu omap-iommu.0: isp: version 1.1 [ 10.375793] vpfe_init [ 10.378662] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 10.385406] cpuidle: using governor ladder [ 10.389556] cpuidle: using governor menu [ 10.499511] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect [ 10.506530] Registered led device: beagleboard::usr0 [ 10.511688] Registered led device: beagleboard::usr1 [ 10.518127] Registered led device: beagleboard::pmu_stat [ 10.525207] usbcore: registered new interface driver usbhid [ 10.530853] usbhid: USB HID core driver [ 10.534881] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 10.541778] usbcore: registered new interface driver snd-usb-audio [ 10.617004] usb 2-2: new high speed USB device using ehci-omap and address 2 [ 10.630584] No device for DAI omap-mcbsp-dai-0 [ 10.635101] No device for DAI omap-mcbsp-dai-1 [ 10.639587] No device for DAI omap-mcbsp-dai-2 [ 10.644073] No device for DAI omap-mcbsp-dai-3 [ 10.648590] No device for DAI omap-mcbsp-dai-4 [ 10.653045] OMAP3 Beagle SoC init [ 10.657226] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok [ 10.668640] ALSA device list: [ 10.671722] #0: omap3beagle (twl4030) [ 10.675659] oprofile: using arm/armv7 [ 10.679595] TCP cubic registered [ 10.682861] NET: Registered protocol family 17 [ 10.687408] NET: Registered protocol family 15 [ 10.691955] lib80211: common routines for IEEE802.11 drivers [ 10.697723] ThumbEE CPU extension supported. [ 10.702026] Power Management for TI OMAP3. [ 10.707366] SmartReflex driver initialized [ 10.711669] omap3beaglelmb: Driver registration complete [ 10.725372] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 10.733673] registered taskstats version 1 [ 10.738494] fbcvt: 640x480@60: CVT Name - .307M3-R [ 10.752227] Console: switching to colour frame buffer device 80x30 [ 10.764343] regulator_init_complete: incomplete constraints, leaving VAUX3 on [ 10.774658] regulator_init_complete: incomplete constraints, leaving VDAC on [ 10.782623] omap_vout omap_vout: probed for an unknown device [ 10.788818] Waiting for root device /dev/mmcblk0p2... [ 10.796447] usb 2-2: New USB device found, idVendor=0424, idProduct=9514 [ 10.803192] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.812561] hub 2-2:1.0: USB hub found [ 10.816558] hub 2-2:1.0: 5 ports detected [ 10.929016] mmc0: host does not support reading read-only switch. assuming write-enable. [ 10.937164] mmc0: new high speed SDHC card at address 1234 [ 10.942993] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 10.947784] mmcblk0: p1 p2 [ 11.109191] usb 2-2.1: new high speed USB device using ehci-omap and address 3 [ 11.234161] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 11.241088] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.251312] smsc95xx v1.0.4 [ 11.311340] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, fa:3c:04:4b:61:6f [ 18.863555] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 18.872955] kjournald starting. Commit interval 5 seconds [ 19.590057] EXT3-fs (mmcblk0p2): using internal journal [ 19.595336] EXT3-fs (mmcblk0p2): recovery complete [ 19.603515] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode [ 19.610687] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 19.620727] devtmpfs: mounted [ 19.623748] Freeing init memory: 204K INIT: version 2.86 booting warning: can't open /etc/mtab: No such file or directory mount: only root can mount proc on /proc Please wait: booting... mount: only root can do that (effective UID is 33) grep: /proc/filesystems: No such file or directory mount: only root can do that (effective UID is 33) grep: /proc/mounts: No such file or directory grep: /proc/mounts: No such file or directory Remounting root file system... mount: only root can do that (effective UID is 33) mount: only root can do that (effective UID is 33) mount: only root can do that (effective UID is 33) Caching udev devnodes Populating dev cachemv: cannot stat `/tmp/uname': No such file or directory error: "net.ipv4.conf.default.rp_filter" is an unknown key error: "net.ipv4.conf.all.rp_filter" is an unknown key logger: mount: only root can do that (effective UID is 33) chown: changing ownership of `/var/volatile/cache': Operation not permitted /etc/volatile.cache: line 3: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/volatile/lock': Operation not permitted /etc/volatile.cache: line 7: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/volatile/log': Operation not permitted /etc/volatile.cache: line 11: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/volatile/run': Operation not permitted /etc/volatile.cache: line 15: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/volatile/tmp': Operation not permitted /etc/volatile.cache: line 19: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/lock/subsys': Operation not permitted /etc/volatile.cache: line 23: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/log/wtmp': Operation not permitted /etc/volatile.cache: line 27: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/log/lastlog': Operation not permitted /etc/volatile.cache: line 31: can't create /dev/tty0: Permission denied touch: cannot touch `/var/run/utmp': Permission denied chown: changing ownership of `/var/run/utmp': Operation not permitted /etc/volatile.cache: line 35: can't create /dev/tty0: Permission denied chmod: changing permissions of `/var/run/utmp': Operation not permitted /etc/volatile.cache: line 36: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/run/resolv.conf': Operation not permitted /etc/volatile.cache: line 40: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/run/resolv.conf': Operation not permitted /etc/volatile.cache: line 44: can't create /dev/tty0: Permission denied chown: changing ownership of `/var/run/wpa_supplicant': Operation not permitted /etc/volatile.cache: line 48: can't create /dev/tty0: Permission denied grep: /proc/filesystems: No such file or directory ALSA: Restoring mixer settings... hostname: you must be root to change the host name Cleaning: /etc/network/run/ifstate. sed: /proc/mounts: No such file or directory /usr/sbin/alsactl: load_state:1625: No soundcards found... [ 22.120880] NET: Registered protocol family 10 INIT: Entering runlevel: 5 Starting system message bus: start-stop-daemon: user `messagebus' not found /etc/rc5.d/S10dropbear: line 31: can't open /proc/mounts: no such file Starting Dropbear SSH server: dropbear. Starting advanced power management daemon: start-stop-daemon: nothing in /proc - not mounted? (failed.) Starting syslog-ng:start-stop-daemon: nothing in /proc - not mounted? . * *[fail] Starting web server: apache2start-stop-daemon: nothing in /proc - not mounted? failed _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
