The following errata report has been submitted for RFC8994, "An Autonomic Control Plane (ACP)".
-------------------------------------- You may review the report below and at: https://www.rfc-editor.org/errata/eid7558 -------------------------------------- Type: Technical Reported by: J. William Atwood <[email protected]> Section: 6.2.1 Original Text ------------- ACP nodes MUST NOT support certificates with RSA public keys of less than a 2048-bit modulus or curves with group order of less than 256 bits. They MUST support certificates with RSA public keys with 2048-bit modulus and MAY support longer RSA keys. They MUST support certificates with ECC public keys using NIST P-256 curves and SHOULD support P-384 and P-521 curves. ACP nodes MUST NOT support certificates with RSA public keys whose modulus is less than 2048 bits, or certificates whose ECC public keys are in groups whose order is less than 256 bits. RSA signing certificates with 2048-bit public keys MUST be supported, and such certificates with longer public keys MAY be supported. ECDSA certificates using the NIST P-256 curve MUST be supported, and such certificates using the P-384 and P-521 curves SHOULD be supported. Corrected Text -------------- ACP nodes MUST NOT support certificates with RSA public keys whose modulus is less than 2048 bits, or certificates whose ECC public keys are in groups whose order is less than 256 bits. RSA signing certificates with 2048-bit public keys MUST be supported, and such certificates with longer public keys MAY be supported. ECDSA certificates using the NIST P-256 curve MUST be supported, and such certificates using the P-384 and P-521 curves SHOULD be supported. Notes ----- The second paragraph in the original text appears to be a more carefully-written version of the first paragraph. Therefore the first paragraph should be deleted and the second paragraph retained. Instructions: ------------- This erratum is currently posted as "Reported". If necessary, please use "Reply All" to discuss whether it should be verified or rejected. When a decision is reached, the verifying party can log in to change the status and edit the report, if necessary. -------------------------------------- RFC8994 (draft-ietf-anima-autonomic-control-plane-30) -------------------------------------- Title : An Autonomic Control Plane (ACP) Publication Date : May 2021 Author(s) : T. Eckert, Ed., M. Behringer, Ed., S. Bjarnason Category : PROPOSED STANDARD Source : Autonomic Networking Integrated Model and Approach Area : Operations and Management Stream : IETF Verifying Party : IESG _______________________________________________ Anima mailing list [email protected] https://www.ietf.org/mailman/listinfo/anima
