Hello again,
Sorry to keep asking about the same topic, but can't figure this out
on my own and don't know where else to ask.
Your patch tells me that DV Cam is not connected
But when I change DVCamInput block for FrameGrabber block, it
initializes it (it recognizes the camera).
The problem is that then it gives me an error starting the eyesweb
execution engine
it finally stops the patch...
Would someone be so kind as to give me a hand with all this?
Many thanks,
Opie

On Wed, Mar 3, 2010 at 3:48 PM, sahAL meRchaNT <sah...@gmail.com> wrote:
> Hey Boba!
>
> The patch that i acquired from the guys at Kitchen Budapest uses object from
> the older versions of EyesWeb. I installed these almost a year back... but
> according to my memory I installed the previous versions of EyesWeb just
> like I've written down in my mail.
>
> I'll try to load EyesWeb from scratch on another PC and see if it works...
>
> If before that you find a solution dont forget to post it on the forum...
>
> You can also get in touch with Eduardo on eduardomcmagalh...@gmail.com he
> has managed to get it to work...
>
> ---
> sahAL
> Ph.: +31611334896
> http://www.sahalmerchant.com/
> http://zamonia.blogspot.com/
> "The Biggest factor that makes you a saint is the amount of press coverage
> you get." - Tender Branson
>
>
> 2010/2/24 Bo Ba <bo...@mail.ru>
>>
>> Hi Sahal,
>>
>> This is the place where Eyes Web can be found (I think all of them):
>> ftp://ftp.infomus.org/Evaluate/EyesWeb/
>>
>> However, while following your installation instructions, I am running into
>> undeterministic issues. I installed
>> ftp://ftp.infomus.org/Evaluate/EyesWeb/Legacy/EyesWeb_legacy_setup.exe (is
>> this what you call "Legacy Setup"), then proceeded to install
>> ftp://ftp.infomus.org/Evaluate/EyesWeb/Version_3.0.0/EyesWeb_addons_3.0.0.exe
>> (my guess is this  corresponds to "EyesWeb Ver. 3 add on") and get message
>> "Eyes Web 2.5 or later must be installed".
>>
>> I am able to install the latest version (5) of Eyes Web, however, when I
>> run your patch I get an error on load.
>>
>> I would appreciate it very much if you could detail installation procedure
>> in terms of links to the files on the above ftp site.
>>
>> Thanks a lot.
>>
>>
>> -Vladimir
>> -----Original Message-----
>> From: sahAL meRchaNT <sah...@gmail.com>
>> To: ross.branni...@aut.ac.nz, bo...@mail.ru,
>> thierry.cailhe...@laposte.net,
>> victorjaco1...@yahoo.it, andre.hay...@gmail.com,
>> animata-users@lists.kitchenbudapest.hu, Mary Rodriguez <mary...@gmail.com>
>> Date: Mon, 22 Feb 2010 23:33:03 +0100
>> Subject: Patches - Animata+Eyes Web+MaxMSP
>>
>> > Hi All,
>> >
>> > I finally got down to writing ans getting all my patches together...
>> > although they dont look like much i had a lot of organising to do.
>> >
>> >
>> > Find attached the patches for Animata to work with EyesWeb+MaxMSP
>> >
>> > I don't think the Animata mailing list stores attachments so all those
>> > who
>> > need the patches mailed to them personally reply to this thread.
>> >
>> > If the EyesWeb patch attached doesnt not work well with the latest
>> > version
>> > of EyesWeb I suggest uninstalling your current EyesWeb version
>> >
>> > =====================
>> >
>> > 1. Uninstall all previous versions of EyesWeb and start with a clean
>> > Install
>> > of the EyesWeb Legacy setup
>> > 2. then The EyesWeb Ver.3 & Ver.4 addons setup
>> > 3. then the current version of EyesWeb.
>> > (If you cant find any of these versions, mail me and I'll try and upload
>> > them somewhere for u to download)
>> >
>> > =====================
>> >
>> > Ok Now we're good to go
>> >
>> > For my Animata setup I use
>> > 1. A PC for EyesWeb and then for MaxMSP to capture OSC data
>> > 2. A Mac to recieve the OSC data from the PC and then finally Animata
>> >
>> > =====================
>> > *
>> > PC Patches
>> > *1. "*oscmanLive.eywx*" - This patch should work perfectly if you've
>> > installed all previous versions of EyesWeb. Make sure your camera is on
>> > &
>> > running before u start this patch. Make sure Windows has detected your
>> > camera. (I use a firewire port for an external camera. I havent tried an
>> > inbuilt cam or a webcam). Press play and wallah!!
>> > 2.* "UDP Receive.maxpat"* - this is a basic MaxMSP patch for stealing
>> > OSC
>> > data from EyesWeb. Make sure you change the IP address in the "updsend"
>> > object box which is now 145.33.220.47. Change this to the IP address of
>> > your
>> > Mac where you are going to run Animata from. 7000 is the port. You can
>> > leave
>> > it as it is.
>> >
>> > You should see numbers fluctuating which means the patch is capturing
>> > OSCs
>> > from EyesWeb.
>> >
>> > =====================
>> > *
>> > MAC Patches
>> > *1.*"OSC_Receive Animata.maxpat"* This patch receives the OSC data from
>> > the
>> > *"UDP Receive.maxpat" *on the PC. Once you see numbers fluctuating you
>> > know
>> > alls working well. Make sure the gate is unchecked if u dont see
>> > anything
>> > moving. Below u will see a series of bpatchers with names like "head' ,
>> > "hd1rt", "hd1lt"etc.
>> > These are the names of the joints...
>> > Find attached *Animata_Joints.jpg* to see how I've named the joints.
>> > hd = Hand
>> > lg = Leg
>> > rt= Right
>> > lt  = Left
>> > After  you've named the joints as in the jpg, lastly on your projector
>> > settings you will have to flip the image so that your movements
>> > corresponds
>> > with your projected Animata character.
>> > If your projector doesnt have a flip option or you don't wish to go
>> > through
>> > the pain of flipping ur image just flip the names of the joints in
>> > Animata
>> > and interchange them. i.e. name all the joints on the right of your
>> > screen
>> > are "hd1rt" etc. and the ones on the left with "hd1lt" etc.
>> >
>> > 2. *"OSC_Scalar.maxpat"* - this is a patch that *"OSC_Receive
>> > Animata.maxpat"* refers to for the pictslider. Make sure this is in the
>> > same
>> > folder as the main patch.
>> >
>> > =====================
>> >
>> > Well thats about all there is to it.
>> > It should work fine if you've gone through all these steps.
>> >
>> > Once again thanks to the KitchenBudapest team for sharing their  patches
>> > with me and also a big thank you to Jan Klug my teacher at the Frank
>> > Mohr
>> > Instituut.
>> >
>> > If anyone has any more questions feel free to write to me and share your
>> > videos. I'm curious to see them,
>> >
>> > Warm regards from COLD COLD HOLLAND!!
>> >
>> > ---
>> > sahAL
>> > Ph.: +31611334896
>> > http://www.sahalmerchant.com/
>> > http://zamonia.blogspot.com/
>> > "The Biggest factor that makes you a saint is the amount of press
>> > coverage
>> > you get." - Tender Branson
>> >
>> > ATTACHMENT: application/zip (PC Patches.zip)
>> > ATTACHMENT: application/zip (MAC Patches.zip)
>> >
>
>
> _______________________________________________
> animata-users mailing list
> animata-users@lists.kitchenbudapest.hu
> http://lists.kitchenbudapest.hu/cgi-bin/mailman/listinfo/animata-users
>
>
_______________________________________________
animata-users mailing list
animata-users@lists.kitchenbudapest.hu
http://lists.kitchenbudapest.hu/cgi-bin/mailman/listinfo/animata-users

Reply via email to