If that's all you are getting from -vvvv this implies you are using paramiko (Enterprise Linux default), and not openssh. Try it with an explicit -c ssh and let's see if you get more detail. You won't want to run this normally but may provide more detail.
On Sat, Jul 12, 2014 at 9:03 AM, Chris Jones <[email protected]> wrote: > *I did use -vvvv and I posted the output from it.* > > I have looked at the docs and found them to be a little sparse on details > but good at high-level concepts. They seem to leave out specific details > with VERY specific how-tos to make sure simple things do not impede > progress (not being critical - simply frustrated). > > I also tried -c ssh and -c paramiko with no luck. > > If there is a permission's issue then what would be the suggested fix and > where in the docs does it show a DETAILED example? > > thx > > > On Saturday, July 12, 2014 8:52:56 AM UTC-4, Michael DeHaan wrote: > >> Try running with -vvvv if you are using the OpenSSH (-c ssh, or the >> default on mostly all but CentOS/RHEL control machines) and it will provide >> some expanded detail for starters. >> >> Seems to be a permissions problem on your homedir though. >> >> >> On Sat, Jul 12, 2014 at 8:49 AM, Chris Jones <[email protected]> wrote: >> >>> Environments: >>> - 2 VMs (one VirtualBox with CentOS 7 and one Fusion with Fedora 20) >>> -Python 2.7.5 >>> -Ansible 1.6.6 installed via PIP >>> -host file with IP of other VM >>> -ssh works fine in both directions >>> -sftp on both vms >>> -sudo user on both vms >>> -ssh-key-gen on centos 7 vm and copied to fedora vm in authorized_keys >>> (tested ssh w/o password and it works) >>> >>> The following command works: >>> ansible all -m ping -vvvv -c local >>> >>> The following command fails: >>> ansible all -m ping -vvvv >>> >>> --- Begin output ---- >>> 192.168.1.233> ESTABLISH CONNECTION FOR USER: cjones >>> <192.168.1.233> REMOTE_MODULE ping >>> <192.168.1.233> EXEC ['ssh', '-C', '-tt', '-vvv', '-o', >>> 'ControlMaster=auto', '-o', 'ControlPersist=60s', '-o', >>> 'ControlPath=/home/cjones/.ansible/cp/ansible-ssh-%h-%p-%r', '-o', >>> 'KbdInteractiveAuthentication=no', '-o', 'PreferredAuthentications= >>> gssapi-with-mic,gssapi-keyex,hostbased,publickey', '-o', >>> 'PasswordAuthentication=no', '-o', 'ConnectTimeout=10', '192.168.1.233', >>> "/bin/sh -c 'mkdir -p >>> $HOME/.ansible/tmp/ansible-tmp-1405139922.21-267195074145055 >>> && chmod a+rx $HOME/.ansible/tmp/ansible-tmp-1405139922.21-267195074145055 >>> && echo $HOME/.ansible/tmp/ansible-tmp-1405139922.21-267195074145055'"] >>> <192.168.1.233> PUT /tmp/tmpa1DdNK TO /home/cjones/.ansible/tmp/ >>> ansible-tmp-1405139922.21-267195074145055/ping >>> 192.168.1.233 | FAILED => failed to transfer file to >>> /home/cjones/.ansible/tmp/ansible-tmp-1405139922.21- >>> 267195074145055/ping: >>> >>> Received message too long 1097295214 >>> ---- End output ---- >>> >>> Suggestions? What gives? This is taking way too long to evaluate :( >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >>> To view this discussion on the web visit https://groups.google.com/d/ >>> msgid/ansible-project/41323394-c166-46a7-b231- >>> c70799164a53%40googlegroups.com >>> <https://groups.google.com/d/msgid/ansible-project/41323394-c166-46a7-b231-c70799164a53%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/90cedf71-5c5f-428a-9de0-454ac9d54c35%40googlegroups.com > <https://groups.google.com/d/msgid/ansible-project/90cedf71-5c5f-428a-9de0-454ac9d54c35%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CA%2BnsWgz22cND6Cfp_CM%3DGcXmqsjjgWP_3d9T-C24N2kBTzzfsA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
