Hello, I'm running ansible-playbook 1.7.2 on Centos 6 and after running ok for a couple of weeks, now I'm getting this:
<https://lh5.googleusercontent.com/-I6RPfiltD-o/VFP4D5X6e2I/AAAAAAAABYY/DAxhmNUlszc/s1600/Screen%2BShot%2B2014-10-31%2Bat%2B3.48.28%2BPM.png> Note that the /tmp full path is missing. I used to get this: <https://lh5.googleusercontent.com/-rdS2kRUL1ws/VFP4Ncf8flI/AAAAAAAABYg/dAocJ3Q2KKk/s1600/Screen%2BShot%2B2014-10-31%2Bat%2B3.48.58%2BPM.png> Same playbook, same command. The playbook has not changed, and the two examples you see above were run on the same day. The weird thing is that around half the time it now fails with the above symptom. The other half it continues to work just fine for the entire playbook. It is as if between the EXEC line and the PUT line that the path-to-be-appended is being lost. I have tried reverting to 1.7.1 without success. Suggestions? Thank you, Paul -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/457f781f-d3da-473c-9929-0f6163fa03c7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
