I am using ios_template to deploy some DMVPN tunnels. For some reason it is not recognising two commands that already exist on the router - *ip nhrp map a.a.a.a b.b.b.b* and* ip nhrp nhs a.a.a.a*. I'm not really sure what is unique about these two commands to produce this affect, and it isn't currently stopping me from doing anything. It just throws a spanner in the idea of being idempotent. My guess would be a problem with the underlying regex doing the screen scraping.
Running the playbook with -vvv option produces this output (cleaned up): "src": ! interface Tunnel10 description primary tunnel ip vrf forwarding VRF-A ip address 10.0.0.11 255.255.240.0 no ip redirects ip mtu 1400 ip nhrp authentication 10 ip nhrp map multicast 172.16.0.11 ip nhrp map 10.0.0.1 172.16.0.11 ip nhrp network-id 10 ip nhrp holdtime 360 ip nhrp nhs 10.0.0.1 ip nhrp shortcut ip tcp adjust-mss 1360 load-interval 30 delay 600 qos pre-classify tunnel source Loopback1 tunnel mode gre multipoint tunnel key 10 end "updates": interface Tunnel10 ip nhrp map 10.0.0.1 172.16.0.11 ip nhrp ohs 10.0.0.1 -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/837e4cc8-d4cb-4091-998d-d0470f06372b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
