Hi,
My goal is to pull down a switch's(HP Procurve Switch 5400zl) running
config using Ansible 2.1.1.0 on Centos7.
I'm just trying to run basic commands using adhoc ansible commands. I've
tried using different connection types but, none of them work. I did notice
at the end of the SSH session output "debug3: mux_client_read_packet: read
header failed: Broken pipe".
Any ideas on how I can troubleshoot any further? I do have
"host_key_checking=false".
Thanks.
====================================================
When I run the following command with "ansible_connection=paramiko" set in
the inventory file for this host.
>ansible sw1 -u admin -m raw -a "show run" -vvvv
Using /etc/ansible/ansible.cfg as config file
Loaded callback minimal of type stdout, v2.0
<xxx.xxx.169.40> ESTABLISH CONNECTION FOR USER: admin on PORT 22 TO
xxx.xxx.169.40
sw1 | UNREACHABLE! => {
"changed": false,
"msg": "Authentication failed.",
"unreachable": true
}
if I set "ansible_connection=ssh" or "smart" i get the following.
> ansible sw1 -u admin -m raw -a "show run" -vvvv
Using /etc/ansible/ansible.cfg as config file
Loaded callback minimal of type stdout, v2.0
<xxx.xxx.169.40> ESTABLISH SSH CONNECTION FOR USER: admin
<xxx.xxx.169.40> SSH: EXEC sshpass -d12 ssh -C -vvv -o ControlMaster=auto
-o ControlPersist=60s -o User=admin -o ConnectTimeout=10 -o
ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r -tt xxx.xxx.169.40 'show
run'
sw1 | SUCCESS | rc=0 >>
SSH command execution is not supported.
OpenSSH_6.6.1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 56: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket
"/root/.ansible/cp/ansible-ssh-xxx.xxx.169.40-22-admin" does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to xxx.xxx.169.40 [xxx.xxx.169.40] port 22.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 9999 ms remain after connect
debug1: permanently_set_uid: 0/0
debug3: Incorrect RSA1 identifier
debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 2.0, remote software version Mocana SSH
5.3.1
debug1: no match: Mocana SSH 5.3.1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "xxx.xxx.169.40" from file
"/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:22
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs:
[email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit:
[email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-dss
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit:
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa
debug2: kex_parse_kexinit:
aes256-ctr,aes256-cbc,[email protected],aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,3des-cbc
debug2: kex_parse_kexinit:
aes256-ctr,aes256-cbc,[email protected],aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,3des-cbc
debug2: kex_parse_kexinit: hmac-sha1-96,hmac-md5,hmac-sha1,hmac-md5-96
debug2: kex_parse_kexinit: hmac-sha1-96,hmac-md5,hmac-sha1,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: setup hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: kex: diffie-hellman-group14-sha1 need=16 dh_need=16
debug1: kex: diffie-hellman-group14-sha1 need=16 dh_need=16
debug2: bits set: 1035/2048
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Server host key: RSA 65:da:57:c1:c8:99:ba:e0:fa:65:78:41:d6:5a:9e:53
debug3: load_hostkeys: loading entries for host "xxx.xxx.169.40" from file
"/root/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:22
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'xxx.xxx.169.40' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:22
debug2: bits set: 1042/2048
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/id_rsa (0x7fa066fc3e90),
debug2: key: /root/.ssh/id_dsa ((nil)),
debug2: key: /root/.ssh/id_ecdsa ((nil)),
debug2: key: /root/.ssh/id_ed25519 ((nil)),
debug3: input_userauth_banner
debug1: Authentications that can continue: password
debug3: start over, passed a different list password
debug3: preferred
gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup password
debug3: remaining preferred:
,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to xxx.xxx.169.40 ([xxx.xxx.169.40]:22).
debug1: setting up multiplex master socket
debug3: muxserver_listen: temporary control path
/root/.ansible/cp/ansible-ssh-xxx.xxx.169.40-22-admin.DDZxiRwjLNWQxWdm
debug2: fd 4 setting O_NONBLOCK
debug3: fd 4 is O_NONBLOCK
debug3: fd 4 is O_NONBLOCK
debug1: channel 0: new
[/root/.ansible/cp/ansible-ssh-xxx.xxx.169.40-22-admin]
debug3: muxserver_listen: mux listener channel 0 fd 4
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x08
debug1: control_persist_detach: backgrounding master process
debug2: control_persist_detach: background process is 21748
debug2: fd 4 setting O_NONBLOCK
debug1: forking to background
debug1: Entering interactive session.
debug2: set_control_persist_exit_time: schedule exit in 60 seconds
debug1: multiplexing control connection
debug2: fd 5 setting O_NONBLOCK
debug3: fd 5 is O_NONBLOCK
debug1: channel 1: new [mux-control]
debug3: channel_post_mux_listener: new mux channel 1 fd 5
debug3: mux_master_read_cb: channel 1: hello sent
debug2: set_control_persist_exit_time: cancel scheduled exit
debug3: mux_master_read_cb: channel 1 packet type 0x00000001 len 4
debug2: process_mux_master_hello: channel 1 slave version 4
debug2: mux_client_hello_exchange: master version 4
debug3: mux_client_forwards: request forwardings: 0 local, 0 remote
debug3: mux_client_request_session: entering
debug3: mux_client_request_alive: entering
debug3: mux_master_read_cb: channel 1 packet type 0x10000004 len 4
debug2: process_mux_alive_check: channel 1: alive check
debug3: mux_client_request_alive: done pid = 21750
debug3: mux_client_request_session: session request sent
debug3: mux_master_read_cb: channel 1 packet type 0x10000002 len 78
debug2: process_mux_new_session: channel 1: request tty 1, X 0, agent 0,
subsys 0, term "xterm-256color", cmd "show run", env 1
debug3: process_mux_new_session: got fds stdin 6, stdout 7, stderr 8
debug2: fd 7 setting O_NONBLOCK
debug2: fd 8 setting O_NONBLOCK
debug1: channel 2: new [client-session]
debug2: process_mux_new_session: channel_new: 2 linked to control channel 1
debug2: channel 2: send open
debug2: callback start
debug2: client_session2_setup: id 2
debug2: channel 2: request pty-req confirm 1
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 2: request env confirm 0
debug1: Sending command: show run
debug2: channel 2: request exec confirm 1
debug3: mux_session_confirm: sending success reply
debug2: callback done
debug2: channel 2: open confirm rwindow 32768 rmax 32768
debug1: mux_client_request_session: master session id: 2
debug2: channel_input_status_confirm: type 99 id 2
debug2: PTY allocation request accepted on channel 2
debug2: channel_input_status_confirm: type 99 id 2
debug2: exec request accepted on channel 2
debug2: channel 2: rcvd eof
debug2: channel 2: output open -> drain
debug1: client_input_channel_req: channel 2 rtype exit-status reply 0
debug3: mux_exit_message: channel 2: exit message, exitval 0
debug2: channel 2: rcvd close
debug2: channel 2: close_read
debug2: channel 2: input open -> closed
debug3: channel 2: will not send data after close
debug1: channel 0: free:
/root/.ansible/cp/ansible-ssh-xxx.xxx.169.40-22-admin, nchannels 3
debug3: channel 0: status: The following connections are open:
#2 client-session (t4 r85460946 i3/0 o1/0 fd -1/7 cc 1)
debug1: channel 1: free: mux-control, nchannels 2
debug3: channel 1: status: The following connections are open:
#2 client-session (t4 r85460946 i3/0 o1/0 fd -1/7 cc 1)
debug1: channel 2: free: client-session, nchannels 1
debug3: channel 2: status: The following connections are open:
#2 client-session (t4 r85460946 i3/0 o1/0 fd -1/7 cc 1)
debug3: fd 0 is not O_NONBLOCK
debug3: fd 1 is not O_NONBLOCK
debug1: fd 2 clearing O_NONBLOCK
Connection to xxx.xxx.169.40 closed by remote host.
debug3: mux_client_read_packet: read header failed: Broken pipe
Transferred: sent 2976, received 1600 bytes, in 0.2 seconds
Bytes per second: sent 15203.1, received 8173.7
debug1: Exit status -1
debug2: Received exit status from master 0
Shared connection to xxx.xxx.169.40 closed.
====================================================
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/39f508af-b1e3-49f7-9a49-56ab9dcb3e4f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
