Have you tried using the "raw" module?
On May 31, 2017 4:53 PM, "Siva Subramaniyan" <[email protected]> wrote:
> LIke, i am able to connect to the GTM over CLI via putty, and below
> command to run disable/enable, Same way is it possible to connect ansible
> and run the below commands. Please advice.
>
> *Disable:-*
>
> testuser@(RS1-PV-INTRA-NET-GTM)(cfg-sync
> Standalone)(Active)(/Common)(tmos.cli)#
> modify /gtm pool pool_mviewuat.vbr.net members modify {
> /Common/RS1-PV-INTRA-NET-LTM:mviewuat_vbr_net { disabled }}
>
> *Enable:-*
>
> testuser@(RS1-PV-INTRA-NET-GTM)(cfg-sync
> Standalone)(Active)(/Common)(tmos.cli)#
> modify /gtm pool pool_mviewuat.vbr.net members modify {
> /Common/RS1-PV-INTRA-NET-LTM:mviewuat_vbr_net { enabled }}
>
>
> Thanks
> Siva Subramaniyan
>
> On Wednesday, May 31, 2017 at 5:38:19 PM UTC-6, Siva Subramaniyan wrote:
>>
>> Oh Ok, Thanks for the Details Tim....!
>>
>> Is it possible to connect my GTM over SSH/TMOS to disable/enable GTM
>> traffic from Ansible by just running as remote command.
>>
>> Thanks
>> Siva Subramaniyan
>>
>> On Wednesday, May 31, 2017 at 5:24:56 PM UTC-6, Tim Rupp wrote:
>>>
>>> bigip_pool_member uses the SOAP api instead of the REST api. this may be
>>> the reason that the gtm module is returning the error that it is; not
>>> because of your credential level.
>>>
>>> At this point I would advise to begin considering an upgrade path for
>>> the devices as the Ansible modules that are currently under development as
>>> well as the existing ones that are being refactored will require version 12
>>> or greater.
>>>
>>> On Wed, May 31, 2017 at 4:13 PM, Siva Subramaniyan <[email protected]>
>>> wrote:
>>>
>>>> Hi Tim,
>>>>
>>>> We use the BIG IP version *"BIG-IP 11.5.3 1.0.167 "*
>>>>
>>>> Since i am a DevOps engineer, i may not get admin access to GTM*, *But
>>>> i was able to control the traffic in LTM using the same credentials by
>>>> using *"**bigip_pool_member". *
>>>>
>>>> Any idea, in the same way i can do it in GTM as well.
>>>>
>>>> Thanks
>>>> Siva Subramaniyan
>>>>
>>>>
>>>> On Wednesday, May 31, 2017 at 4:58:52 PM UTC-6, Tim Rupp wrote:
>>>>>
>>>>> generally you need administrator access on the box. what version of
>>>>> bigip is this?
>>>>>
>>>>> On Wed, May 31, 2017 at 3:49 PM, Siva Subramaniyan <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Hi Tim,
>>>>>>
>>>>>> I just tried, with my "testuser" credentials.
>>>>>>
>>>>>> *Last login: Fri May 26 10:35:36 2017 from 172.21.132.162*
>>>>>>
>>>>>> *testuser@(RS1-PV-INTRA-NET-GTM)(cfg-sync
>>>>>> Standalone)(Active)(/Common)(tmos)# bigstart status restjavad*
>>>>>>
>>>>>> *Syntax Error: unexpected argument "bigstart"*
>>>>>>
>>>>>> My "testuser" have only operator access to the GTM.It will all only
>>>>>> to enable/disable the pool members. May i know what kind of access i
>>>>>> should
>>>>>> have to make REST API calls. So that i will work with Network team to
>>>>>> enable it.
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>> Siva Subramaniyan
>>>>>>
>>>>>>
>>>>>> On Wednesday, May 31, 2017 at 4:35:09 PM UTC-6, Tim Rupp wrote:
>>>>>>>
>>>>>>> what version of bigip are you using? that could be a result of an
>>>>>>> outdated REST daemon, or a crashed REST daemon.
>>>>>>>
>>>>>>> what is the output of
>>>>>>>
>>>>>>> bigstart status restjavad
>>>>>>>
>>>>>>> on the bigip CLI?
>>>>>>>
>>>>>>> On Wed, May 31, 2017 at 3:32 PM, Siva Subramaniyan <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Hi Tim,
>>>>>>>>
>>>>>>>> Thanks for notifying it, I was trying to connect to the unreachable
>>>>>>>> GTM in different Datacenter.
>>>>>>>>
>>>>>>>>
>>>>>>>> I have pointed to the correct GTM where i have the connectivity and
>>>>>>>> ran the Playbook to disable the GTM pool. Getting the Below error.
>>>>>>>> Please
>>>>>>>> advice.
>>>>>>>>
>>>>>>>> *Play book :-*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *$ cat f5-GTM-pool-disable.yml---- hosts: testgtm connection:
>>>>>>>> local tasks: - name: Force pool member offline bigip_gtm_pool:
>>>>>>>> server: "10.46.193.39" user: "testuser" password:
>>>>>>>> "testuser123" state: "disabled" name:
>>>>>>>> "pool_mviewuat.vbr.net
>>>>>>>> <http://pool_mviewuat.vbr.net>" delegate_to: localhost*
>>>>>>>>
>>>>>>>>
>>>>>>>> $ *ansible-playbook f5-GTM-pool-disable.yml -i ../inv/fact-host*
>>>>>>>>
>>>>>>>> PLAY [testgtm] ******************************
>>>>>>>> ************************************************************
>>>>>>>> *****************
>>>>>>>>
>>>>>>>> TASK [Gathering Facts] ******************************
>>>>>>>> ************************************************************
>>>>>>>> *********
>>>>>>>> ok: [10.46.193.39]
>>>>>>>>
>>>>>>>> TASK [Force pool member offline] ******************************
>>>>>>>> ***********************************************************
>>>>>>>> fatal: [10.46.193.39 -> localhost]: FAILED! => {"changed": false,
>>>>>>>> "failed": true, "msg": "404 Unexpected Error: Not Found for uri:
>>>>>>>> https://10.46.193.39:443/mgmt/shared/authn/login\nText:
>>>>>>>> u'{\"code\":404,\"message\":\"http://localhost:8100/mgmt/sha
>>>>>>>> red/authn/login\",\"restOperationId\":87930106,\"errorStack\
>>>>>>>> ":[\"com.f5.rest.common.RestWorkerUriNotFoundException:
>>>>>>>> http://localhost:8100/mgmt/shared/authn/login\",\"at
>>>>>>>> com.f5.rest.common.RestServer.trySendInProcess(RestServer.java:231)\",\"at
>>>>>>>> com.f5.rest.common.RestRequestReceiver.dispatchToService(Res
>>>>>>>> tRequestReceiver.java:93)\",\"at com.f5.rest.common.RestRequest
>>>>>>>> Receiver.processNext(RestRequestReceiver.java:57)\",\"at
>>>>>>>> com.f5.rest.common.RestHelper$2.run(RestHelper.java:1910)\",\"at
>>>>>>>> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)\",\"at
>>>>>>>> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)\",\"at
>>>>>>>> java.lang.Thread.run(Thread.java:722)\\\\n\"]}'"}
>>>>>>>>
>>>>>>>> msg: 404 Unexpected Error: Not Found for uri:
>>>>>>>> https://10.46.193.39:443/mgmt/shared/authn/login
>>>>>>>> Text: u'{"code":404,"message":"http://localhost:8100/mgmt/shared/a
>>>>>>>> uthn/login","restOperationId":87930106,"errorStack":["com.f5
>>>>>>>> .rest.common.RestWorkerUriNotFoundException:
>>>>>>>> http://localhost:8100/mgmt/shared/authn/login","at
>>>>>>>> com.f5.rest.common.RestServer.trySendInProcess(RestServer.java:231)","at
>>>>>>>> com.f5.rest.common.RestRequestReceiver.dispatchToService(RestRequestReceiver.java:93)","at
>>>>>>>> com.f5.rest.common.RestRequestReceiver.processNext(RestRequestReceiver.java:57)","at
>>>>>>>> com.f5.rest.common.RestHelper$2.run(RestHelper.java:1910)","at
>>>>>>>> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)","at
>>>>>>>> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)","at
>>>>>>>> java.lang.Thread.run(Thread.java:722)\
>>>>>>>> "]}'
>>>>>>>> to retry, use: --limit @/apps/ansible-scripts/f5-BigI
>>>>>>>> P/playbooks/f5-GTM-pool-disable.retry
>>>>>>>>
>>>>>>>> PLAY RECAP ******************************
>>>>>>>> ************************************************************
>>>>>>>> *********************
>>>>>>>> 10.46.193.39 : ok=1 changed=0 unreachable=0
>>>>>>>> failed=1
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wednesday, May 31, 2017 at 4:10:54 PM UTC-6, Tim Rupp wrote:
>>>>>>>>>
>>>>>>>>> that error indicates the module cannot reach your F5 device.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> """
>>>>>>>>> requests.exceptions.ConnectionError: HTTPSConnectionPool(host='10.
>>>>>>>>> 44.193.38', port=443): Max retries exceeded with url:
>>>>>>>>> /mgmt/shared/authn/login (Caused by NewConnectionError('<requests.
>>>>>>>>> packages.urllib3.connection.VerifiedHTTPSConnection object at
>>>>>>>>> 0x400a3d0>: Failed to establish a new connection: [Errno 110]
>>>>>>>>> Connection
>>>>>>>>> timed out',))
>>>>>>>>> """
>>>>>>>>>
>>>>>>>>> On Wed, May 31, 2017 at 3:04 PM, Siva Subramaniyan <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Tim,
>>>>>>>>>>
>>>>>>>>>> Thanks for the details..! i got the below error while running the
>>>>>>>>>> devel branch module. I am sorry to disturb you again.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> $ ansible-playbook f5-GTM-pool-disable.yml -i ../inv/fact-host
>>>>>>>>>> -vvvv
>>>>>>>>>> Using /etc/ansible/ansible.cfg as config file
>>>>>>>>>> Loading callback plugin skippy of type stdout, v2.0 from
>>>>>>>>>> /usr/lib/python2.7/site-packages/ansible/plugins/callback/__
>>>>>>>>>> init__.pyc
>>>>>>>>>>
>>>>>>>>>> PLAYBOOK: f5-GTM-pool-disable.yml ******************************
>>>>>>>>>> **********************************************************
>>>>>>>>>> 1 plays in f5-GTM-pool-disable.yml
>>>>>>>>>>
>>>>>>>>>> PLAY [testgtm] ******************************
>>>>>>>>>> ************************************************************
>>>>>>>>>> *****************
>>>>>>>>>>
>>>>>>>>>> TASK [Gathering Facts] ******************************
>>>>>>>>>> ************************************************************
>>>>>>>>>> *********
>>>>>>>>>> Using module file /usr/lib/python2.7/site-packag
>>>>>>>>>> es/ansible/modules/system/setup.py
>>>>>>>>>> <10.44.193.38> ESTABLISH LOCAL CONNECTION FOR USER: ansuser
>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo
>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496267129.89-253660434471106 `"
>>>>>>>>>> && echo ansible-tmp-1496267129.89-253660434471106="` echo
>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496267129.89-253660434471106 `"
>>>>>>>>>> ) && sleep 0'
>>>>>>>>>> <10.44.193.38> PUT /tmp/tmpOB79TI TO
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267129.89-2536604
>>>>>>>>>> 34471106/setup.py
>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c 'chmod u+x
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267129.89-253660434471106/
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267129.89-253660434471106/setup.py
>>>>>>>>>> && sleep 0'
>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c '/usr/bin/python
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267129.89-253660434471106/setup.py;
>>>>>>>>>> rm -rf "/home/ansuser/.ansible/tmp/an
>>>>>>>>>> sible-tmp-1496267129.89-253660434471106/" > /dev/null 2>&1 &&
>>>>>>>>>> sleep 0'
>>>>>>>>>> ok: [10.44.193.38]
>>>>>>>>>> META: ran handlers
>>>>>>>>>>
>>>>>>>>>> TASK [Force pool member offline] ******************************
>>>>>>>>>> ***********************************************************
>>>>>>>>>> task path: /apps/ansible-scripts/f5-BigIP
>>>>>>>>>> /playbooks/f5-GTM-pool-disable.yml:7
>>>>>>>>>> Using module file /usr/lib/python2.7/site-packag
>>>>>>>>>> es/ansible/modules/network/f5/bigip_gtm_pool.py
>>>>>>>>>> <localhost> ESTABLISH LOCAL CONNECTION FOR USER: ansuser
>>>>>>>>>> <localhost> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo
>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496267130.41-260369370140814 `"
>>>>>>>>>> && echo ansible-tmp-1496267130.41-260369370140814="` echo
>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496267130.41-260369370140814 `"
>>>>>>>>>> ) && sleep 0'
>>>>>>>>>> <localhost> PUT /tmp/tmpEWcAQZ TO /home/ansuser/.ansible/tmp/ans
>>>>>>>>>> ible-tmp-1496267130.41-260369370140814/bigip_gtm_pool.py
>>>>>>>>>> <localhost> EXEC /bin/sh -c 'chmod u+x
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267130.41-260369370140814/
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267130.41-260369370140814/bigip_gtm_pool.py
>>>>>>>>>> && sleep 0'
>>>>>>>>>> <localhost> EXEC /bin/sh -c '/usr/bin/python2
>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496267130.41-260369370140814/bigip_gtm_pool.py;
>>>>>>>>>> rm -rf "/home/ansuser/.ansible/tmp/an
>>>>>>>>>> sible-tmp-1496267130.41-260369370140814/" > /dev/null 2>&1 &&
>>>>>>>>>> sleep 0'
>>>>>>>>>> The full traceback is:
>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>> File "/tmp/ansible_cLPO8c/ansible_module_bigip_gtm_pool.py",
>>>>>>>>>> line 654, in <module>
>>>>>>>>>> main()
>>>>>>>>>> File "/tmp/ansible_cLPO8c/ansible_module_bigip_gtm_pool.py",
>>>>>>>>>> line 642, in main
>>>>>>>>>> required_if=spec.required_if
>>>>>>>>>> File "/tmp/ansible_cLPO8c/ansible_m
>>>>>>>>>> odlib.zip/ansible/module_utils/f5_utils.py", line 240, in
>>>>>>>>>> __init__
>>>>>>>>>> File "/tmp/ansible_cLPO8c/ansible_m
>>>>>>>>>> odlib.zip/ansible/module_utils/f5_utils.py", line 265, in
>>>>>>>>>> _get_mgmt_root
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/f5/bigip/__init__.py",
>>>>>>>>>> line 124, in __init__
>>>>>>>>>> self.post_configuration_setup()
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/f5/bigip/__init__.py",
>>>>>>>>>> line 91, in post_configuration_setup
>>>>>>>>>> self._get_tmos_version()
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/f5/bigip/__init__.py",
>>>>>>>>>> line 96, in _get_tmos_version
>>>>>>>>>> response = connect.get(base_uri)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/icontrol/session.py",
>>>>>>>>>> line 258, in wrapper
>>>>>>>>>> response = method(self, REST_uri, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/icontrol/session.py",
>>>>>>>>>> line 427, in get
>>>>>>>>>> return self.session.get(uri, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/sessions.py",
>>>>>>>>>> line 501, in get
>>>>>>>>>> return self.request('GET', url, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/sessions.py",
>>>>>>>>>> line 474, in request
>>>>>>>>>> prep = self.prepare_request(req)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/sessions.py",
>>>>>>>>>> line 407, in prepare_request
>>>>>>>>>> hooks=merge_hooks(request.hooks, self.hooks),
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/models.py",
>>>>>>>>>> line 306, in prepare
>>>>>>>>>> self.prepare_auth(auth, url)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/models.py",
>>>>>>>>>> line 543, in prepare_auth
>>>>>>>>>> r = auth(self)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/icontrol/authtoken.py",
>>>>>>>>>> line 203, in __call__
>>>>>>>>>> self.get_new_token(netloc)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/icontrol/authtoken.py",
>>>>>>>>>> line 100, in get_new_token
>>>>>>>>>> self.password))
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/api.py", line
>>>>>>>>>> 110, in post
>>>>>>>>>> return request('post', url, data=data, json=json, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/api.py", line
>>>>>>>>>> 56, in request
>>>>>>>>>> return session.request(method=method, url=url, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/sessions.py",
>>>>>>>>>> line 488, in request
>>>>>>>>>> resp = self.send(prep, **send_kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/sessions.py",
>>>>>>>>>> line 609, in send
>>>>>>>>>> r = adapter.send(request, **kwargs)
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/requests/adapters.py",
>>>>>>>>>> line 487, in send
>>>>>>>>>> raise ConnectionError(e, request=request)
>>>>>>>>>> requests.exceptions.ConnectionError:
>>>>>>>>>> HTTPSConnectionPool(host='10.44.193.38', port=443): Max retries
>>>>>>>>>> exceeded with url: /mgmt/shared/authn/login (Caused by
>>>>>>>>>> NewConnectionError('<requests.packages.urllib3.connection.VerifiedHTTPSConnection
>>>>>>>>>> object at 0x400a3d0>: Failed to establish a new connection: [Errno
>>>>>>>>>> 110]
>>>>>>>>>> Connection timed out',))
>>>>>>>>>>
>>>>>>>>>> fatal: [10.44.193.38 -> localhost]: FAILED! => {
>>>>>>>>>> "changed": false,
>>>>>>>>>> "failed": true,
>>>>>>>>>> "module_stderr": "Traceback (most recent call last):\n File
>>>>>>>>>> \"/tmp/ansible_cLPO8c/ansible_module_bigip_gtm_pool.py\", line
>>>>>>>>>> 654, in <module>\n main()\n File
>>>>>>>>>> \"/tmp/ansible_cLPO8c/ansible_module_bigip_gtm_pool.py\",
>>>>>>>>>> line 642, in main\n required_if=spec.required_if\n File
>>>>>>>>>> \"/tmp/ansible_cLPO8c/ansible_modlib.zip/ansible/module_utils/f5_utils.py\",
>>>>>>>>>> line 240, in __init__\n File \"/tmp/ansible_cLPO8c/ansible_
>>>>>>>>>> modlib.zip/ansible/module_utils/f5_utils.py\", line 265, in
>>>>>>>>>> _get_mgmt_root\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/f5/bigip/__init__.py\",
>>>>>>>>>> line 124, in __init__\n self.post_configuration_setup()\n
>>>>>>>>>> File \"/usr/lib/python2.7/site-packages/f5/bigip/__init__.py\",
>>>>>>>>>> line 91, in post_configuration_setup\n self._get_tmos_version()\n
>>>>>>>>>> File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/f5/bigip/__init__.py\", line
>>>>>>>>>> 96, in _get_tmos_version\n response = connect.get(base_uri)\n
>>>>>>>>>> File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/icontrol/session.py\", line
>>>>>>>>>> 258, in wrapper\n response = method(self, REST_uri, **kwargs)\n
>>>>>>>>>> File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/icontrol/session.py\", line
>>>>>>>>>> 427, in get\n return self.session.get(uri, **kwargs)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/sessions.py\", line
>>>>>>>>>> 501, in get\n return self.request('GET', url, **kwargs)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/sessions.py\", line
>>>>>>>>>> 474, in request\n prep = self.prepare_request(req)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/sessions.py\", line
>>>>>>>>>> 407, in prepare_request\n hooks=merge_hooks(request.hooks,
>>>>>>>>>> self.hooks),\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/models.py\",
>>>>>>>>>> line 306, in prepare\n self.prepare_auth(auth, url)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/models.py\", line
>>>>>>>>>> 543, in prepare_auth\n r = auth(self)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/icontrol/authtoken.py\", line
>>>>>>>>>> 203, in __call__\n self.get_new_token(netloc)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/icontrol/authtoken.py\", line
>>>>>>>>>> 100, in get_new_token\n self.password))\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/api.py\", line 110,
>>>>>>>>>> in post\n return request('post', url, data=data, json=json,
>>>>>>>>>> **kwargs)\n
>>>>>>>>>> File \"/usr/lib/python2.7/site-packages/requests/api.py\", line
>>>>>>>>>> 56, in request\n return session.request(method=method, url=url,
>>>>>>>>>> **kwargs)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/sessions.py\",
>>>>>>>>>> line 488, in request\n resp = self.send(prep, **send_kwargs)\n
>>>>>>>>>> File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/sessions.py\", line
>>>>>>>>>> 609, in send\n r = adapter.send(request, **kwargs)\n File
>>>>>>>>>> \"/usr/lib/python2.7/site-packages/requests/adapters.py\", line
>>>>>>>>>> 487, in send\n raise ConnectionError(e,
>>>>>>>>>> request=request)\nrequests.exceptions.ConnectionError:
>>>>>>>>>> HTTPSConnectionPool(host='10.44.193.38', port=443): Max retries
>>>>>>>>>> exceeded with url: /mgmt/shared/authn/login (Caused by
>>>>>>>>>> NewConnectionError('<requests.packages.urllib3.connection.VerifiedHTTPSConnection
>>>>>>>>>> object at 0x400a3d0>: Failed to establish a new connection: [Errno
>>>>>>>>>> 110]
>>>>>>>>>> Connection timed out',))\n",
>>>>>>>>>> "module_stdout": "",
>>>>>>>>>> "msg": "MODULE FAILURE",
>>>>>>>>>> "rc": 0
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>> msg: MODULE FAILURE
>>>>>>>>>> to retry, use: --limit @/apps/ansible-scripts/f5-BigI
>>>>>>>>>> P/playbooks/f5-GTM-pool-disable.retry
>>>>>>>>>>
>>>>>>>>>> PLAY RECAP ******************************
>>>>>>>>>> ************************************************************
>>>>>>>>>> *********************
>>>>>>>>>> 10.44.193.38 : ok=1 changed=0 unreachable=0
>>>>>>>>>> failed=1
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>>>> Siva Subramaniyan
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wednesday, May 31, 2017 at 2:24:28 PM UTC-6, Tim Rupp wrote:
>>>>>>>>>>>
>>>>>>>>>>> the module you're using is from "master" branch.
>>>>>>>>>>>
>>>>>>>>>>> Master is not the newest code. the one you want is in "devel"
>>>>>>>>>>> here is the link.
>>>>>>>>>>>
>>>>>>>>>>> https://github.com/F5Networks/f5-ansible/blob/devel/library/
>>>>>>>>>>> bigip_gtm_pool.py
>>>>>>>>>>>
>>>>>>>>>>> -tim
>>>>>>>>>>>
>>>>>>>>>>> On Wed, May 31, 2017 at 12:48 PM, Siva Subramaniyan <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> HI Tim,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks for the details.
>>>>>>>>>>>>
>>>>>>>>>>>> I have tried copying the https://github.com/F5Netwo
>>>>>>>>>>>> rks/f5-ansible/blob/master/library/bigip_gtm_pool.py module
>>>>>>>>>>>>
>>>>>>>>>>>> placed in "/usr/lib/python2.7/site-packa
>>>>>>>>>>>> ges/ansible/modules/network/f5"
>>>>>>>>>>>>
>>>>>>>>>>>> and tried my execution.. Some how it fails, can i wait till get
>>>>>>>>>>>> the stable version or can you advice the stable module to place
>>>>>>>>>>>> and try. i
>>>>>>>>>>>> have the requirement to control the GTM traffic from ansible as my
>>>>>>>>>>>> project
>>>>>>>>>>>> delivery. any help is much appreciated,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> $ ansible-playbook f5-GTM-pool-disable.yml -i ../inv/fact-host
>>>>>>>>>>>> -vvvv
>>>>>>>>>>>> Using /etc/ansible/ansible.cfg as config file
>>>>>>>>>>>> Loading callback plugin skippy of type stdout, v2.0 from
>>>>>>>>>>>> /usr/lib/python2.7/site-packages/ansible/plugins/callback/__
>>>>>>>>>>>> init__.pyc
>>>>>>>>>>>>
>>>>>>>>>>>> PLAYBOOK: f5-GTM-pool-disable.yml ******************************
>>>>>>>>>>>> **********************************************************
>>>>>>>>>>>> 1 plays in f5-GTM-pool-disable.yml
>>>>>>>>>>>>
>>>>>>>>>>>> PLAY [testgtm] ******************************
>>>>>>>>>>>> ************************************************************
>>>>>>>>>>>> *****************
>>>>>>>>>>>>
>>>>>>>>>>>> TASK [Gathering Facts] ******************************
>>>>>>>>>>>> ************************************************************
>>>>>>>>>>>> *********
>>>>>>>>>>>> Using module file /usr/lib/python2.7/site-packag
>>>>>>>>>>>> es/ansible/modules/system/setup.py
>>>>>>>>>>>> <10.44.193.38> ESTABLISH LOCAL CONNECTION FOR USER: ansuser
>>>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo
>>>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496259129.14-190984755053273
>>>>>>>>>>>> `" && echo ansible-tmp-1496259129.14-190984755053273="` echo
>>>>>>>>>>>> $HOME/.ansible/tmp/ansible-tmp-1496259129.14-190984755053273
>>>>>>>>>>>> `" ) && sleep 0'
>>>>>>>>>>>> <10.44.193.38> PUT /tmp/tmpg3h_hL TO
>>>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496259129.14-1909847
>>>>>>>>>>>> 55053273/setup.py
>>>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c 'chmod u+x
>>>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496259129.14-190984755053273/
>>>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496259129.14-190984755053273/setup.py
>>>>>>>>>>>> && sleep 0'
>>>>>>>>>>>> <10.44.193.38> EXEC /bin/sh -c '/usr/bin/python
>>>>>>>>>>>> /home/ansuser/.ansible/tmp/ansible-tmp-1496259129.14-190984755053273/setup.py;
>>>>>>>>>>>> rm -rf "/home/ansuser/.ansible/tmp/an
>>>>>>>>>>>> sible-tmp-1496259129.14-190984755053273/" > /dev/null 2>&1 &&
>>>>>>>>>>>> sleep 0'
>>>>>>>>>>>> ok: [10.44.193.38]
>>>>>>>>>>>> META: ran handlers
>>>>>>>>>>>>
>>>>>>>>>>>> TASK [Force pool member offline] ******************************
>>>>>>>>>>>> ***********************************************************
>>>>>>>>>>>> task path: /opt/ansible-scripts/f5-BigIP/
>>>>>>>>>>>> playbooks/f5-GTM-pool-disable.yml:7
>>>>>>>>>>>> fatal: [10.44.193.38]: FAILED! => {
>>>>>>>>>>>> "failed": true,
>>>>>>>>>>>> "msg": "Could not find imported module support code for
>>>>>>>>>>>> bigip_gtm_pool. Looked for either *.py or f5.py"
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> msg: Could not find imported module support code for
>>>>>>>>>>>> bigip_gtm_pool. Looked for either *.py or f5.py
>>>>>>>>>>>> to retry, use: --limit @/opt/ansible-scripts/f5-BigIP
>>>>>>>>>>>> /playbooks/f5-GTM-pool-disable.retry
>>>>>>>>>>>>
>>>>>>>>>>>> PLAY RECAP ******************************
>>>>>>>>>>>> ************************************************************
>>>>>>>>>>>> *********************
>>>>>>>>>>>> 10.44.193.38 : ok=1 changed=0 unreachable=0
>>>>>>>>>>>> failed=1
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Siva Subramaniyan
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Monday, May 29, 2017 at 1:19:01 PM UTC-6, Tim Rupp wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hey Siva,
>>>>>>>>>>>>>
>>>>>>>>>>>>> That module is not yet part of Ansible core. You need to
>>>>>>>>>>>>> install it locally from the f5-ansible repository until it is.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Instructions for doing that can be found here
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://f5-ansible.readthedocs.io/en/latest/usage/
>>>>>>>>>>>>> installing_modules.html
>>>>>>>>>>>>>
>>>>>>>>>>>>> -tim
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sat, May 27, 2017 at 10:25 PM, Siva Subramaniyan <
>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> HI Tim,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> When I run the Above play book, getting the error as below.
>>>>>>>>>>>>>> Looks like my Ansible version is not recognizing the
>>>>>>>>>>>>>> "bigip_gtm_pool"
>>>>>>>>>>>>>> module. Please advise.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Ansible Version:-*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ansible 2.3.0.0
>>>>>>>>>>>>>> config file = /etc/ansible/ansible.cfg
>>>>>>>>>>>>>> configured module search path = Default w/o overrides
>>>>>>>>>>>>>> python version = 2.7.5 (default, Aug 2 2016, 04:20:16)
>>>>>>>>>>>>>> [GCC 4.8.5 20150623 (Red Hat 4.8.5-4)]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Error while running :-*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *$ ansible-playbook f5-GTM-pool-disable.yml -i
>>>>>>>>>>>>>> ../inv/fact-host --syntax-check -vvvv*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Using /etc/ansible/ansible.cfg as config file
>>>>>>>>>>>>>> *ERROR! no action detected in task. This often indicates a
>>>>>>>>>>>>>> misspelled module name, or incorrect module path.*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The error appears to have been in
>>>>>>>>>>>>>> '/apps/ansible-scripts/f5-BigIP/playbooks/f5-GTM-pool-disable.yml':
>>>>>>>>>>>>>> line 7, column 5, but may
>>>>>>>>>>>>>> be elsewhere in the file depending on the exact syntax
>>>>>>>>>>>>>> problem.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The offending line appears to be:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - name: Force pool member offline
>>>>>>>>>>>>>> ^ here
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The error appears to have been in
>>>>>>>>>>>>>> '/apps/ansible-scripts/f5-BigIP/playbooks/f5-GTM-pool-disable.yml':
>>>>>>>>>>>>>> line 7, column 5, but may
>>>>>>>>>>>>>> be elsewhere in the file depending on the exact syntax
>>>>>>>>>>>>>> problem.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The offending line appears to be:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - name: Force pool member offline
>>>>>>>>>>>>>> ^ here
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> =======================================================
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>> Siva Subramaniyan.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tuesday, May 23, 2017 at 11:26:03 PM UTC-6, Siva
>>>>>>>>>>>>>> Subramaniyan wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi There,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can you please share the used case Playbook for the LTM/GTM
>>>>>>>>>>>>>>> traffic disable in F5 Big IP.
>>>>>>>>>>>>>>> I have the requirement to switch the Traffic during the
>>>>>>>>>>>>>>> change window to do the Server side deployments.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>>> Google Groups "Ansible Project" group.
>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>>>> To post to this group, send email to
>>>>>>>>>>>>>> [email protected].
>>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>>> https://groups.google.com/d/msgid/ansible-project/c635a269-
>>>>>>>>>>>>>> 9a9f-42ce-89ef-0d5db6338400%40googlegroups.com
>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/ansible-project/c635a269-9a9f-42ce-89ef-0d5db6338400%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "Ansible Project" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>> To post to this group, send email to
>>>>>>>>>>>> [email protected].
>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/ansible-project/ba448198-
>>>>>>>>>>>> 87d8-421d-8410-048b6f3e269b%40googlegroups.com
>>>>>>>>>>>> <https://groups.google.com/d/msgid/ansible-project/ba448198-87d8-421d-8410-048b6f3e269b%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "Ansible Project" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to [email protected].
>>>>>>>>>> To post to this group, send email to [email protected].
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/ansible-project/c7cec089-
>>>>>>>>>> 7b8b-459f-93d7-d0ae1b2686f3%40googlegroups.com
>>>>>>>>>> <https://groups.google.com/d/msgid/ansible-project/c7cec089-7b8b-459f-93d7-d0ae1b2686f3%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "Ansible Project" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>> To post to this group, send email to [email protected].
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/ansible-project/722fe644-
>>>>>>>> 5829-4eb2-857f-adead7ba0982%40googlegroups.com
>>>>>>>> <https://groups.google.com/d/msgid/ansible-project/722fe644-5829-4eb2-857f-adead7ba0982%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "Ansible Project" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> To post to this group, send email to [email protected].
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/ansible-project/9cc31800-
>>>>>> 8771-4398-8dc1-521d5d5d4e64%40googlegroups.com
>>>>>> <https://groups.google.com/d/msgid/ansible-project/9cc31800-8771-4398-8dc1-521d5d5d4e64%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Ansible Project" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To post to this group, send email to [email protected].
>>>> To view this discussion on the web visit https://groups.google.com/d/ms
>>>> gid/ansible-project/59604b6c-c75e-4d5c-ac9f-727711ec8514%
>>>> 40googlegroups.com
>>>> <https://groups.google.com/d/msgid/ansible-project/59604b6c-c75e-4d5c-ac9f-727711ec8514%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "Ansible Project" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/ansible-project/48c25309-8e45-49fc-ab75-e665bb411369%40googlegroups.
> com
> <https://groups.google.com/d/msgid/ansible-project/48c25309-8e45-49fc-ab75-e665bb411369%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/CAB0Zv8jRzuqEqwWWgzJUuibi%2BM7SmYVd0uBbpybDmZTTStV5Ug%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
