Hi there, I have a question.
I'm writing an ansible playbook for my cisco ASA device. As part of the playbook, I need to reset the "Current BOOT variable" in below output. sec/stby/Fw4Script(config)# show bootvar BOOT variable = disk0:/asa916-10-k8.bin;disk0:/asa916-k8.bin Current BOOT variable = disk0:/asa916-10-k8.bin;disk0:/asa916-k8.bin;disk0:/asa823-k8.bin CONFIG_FILE variable = Current CONFIG_FILE variable = sec/stby/Fw4Script(config)# And it should be done by 3 steps: no boot system disk0:/asa823-k8.bin no boot system disk0:/asa916-k8.bin no boot system disk0:/asa916-10-k8.bin So Ansible should get the output and register it, and remove the variables(which are seperated by ";" in the output) one by one. Anyone has any idea how to do it? -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/a871e688-c305-4bf0-896f-35c390c2dbab%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
