Hi, use cisco ios config module with a jinja template. Works like a charm for me.
https://docs.ansible.com/ansible/latest/collections/cisco/ios/ios_config_module.html Michael [email protected] schrieb am Montag, 28. September 2020 um 22:16:43 UTC+2: > Hello experts, I am looking for a way to automate access ports for NAC on > legacy authentication. I only want to configure ports that already have > "switchport mode access" and the "authentication event server dead action > authorize vlan" we would like to match to the current vlan. > > I need to go from > int gi 0/1 > switchport access vlan 3216 > switchport mode access > switchport voice vlan 120 > spanning-tree portfast > > to > switchport access vlan 105 > switchport mode access > switchport voice vlan 120 > ip device tracking maximum 10 > authentication event server dead action authorize vlan 105 > authentication host-mode multi-auth > authentication order dot1x mab webauth > authentication priority dot1x mab > authentication port-control auto > authentication periodic > authentication timer reauthenticate server > mab > dot1x pae authenticator > dot1x timeout tx-period 10 > spanning-tree portfast > > > > > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/6a76ee96-0298-43d2-aa1c-8c8fb882c3f3n%40googlegroups.com.
