Below is the script i have written to perform MD5 verification for stacked
switch 2. Problem with this script is that iam saving output of MD5
verification command to a custom varriable called 'md5_flash2' using
register and then checking if correct md5 value is present there.
Since iam using register, so only the output of last device will get saved
(and over-write previous data) in this custom variable. So iam forced to
check MD5 verification for 1 device at a time. Is there any alternate way
to write script to do do MD5 verification (and other tasks) simultaneously
for several devices?
- name: DO MD5 VERIFICATION FOR FLASH 2 AND END PLAYBOOK IF IT FAILS
block:
- ios_command:
commands: "verify /md5
flash2:/c2960x-universalk9-mz.152-7.E3/c2960x-universalk9-mz.152-7.E3.bin"
vars:
ansible_command_timeout: 360
register: md5_flash2
- debug:
msg: MD5 VERIFICATION IS SUCCESSFUL FOR FLASH 2
when: "'f148fc860a1d4d08532bc616724e632d' in md5_flash2.stdout[0]"
- meta: end_host
when: "'f148fc860a1d4d08532bc616724e632d' not in
md5_flash2.stdout[0]"
when:
- "'Switch 02' in show_version.stdout[0]"
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/7d337e4d-7e6f-461c-a975-45447925e9a5n%40googlegroups.com.
