Hi Smith,
Thanks for your suggestions but unfortunately, it's a single command and we
cannot split it.
I am planning to use the 'ansible.netcommon.cli_command' module instead
which has an option to check all conditions and I'm going to test it soon.
I find this module more effective than the ios_command module
*- name: Install and activate new IOS image*
* ansible.netcommon.cli_command:*
* command: 'install add file {{ fsystem }}:{{ image_9300.image_name }}
activate commit'*
* check_all: true*
* prompt:*
* - 'Please confirm you have changed boot config to
flash:packages.conf \[y/n\]'*
* - 'Do you want to proceed\? \[y/n\]'*
* answer:*
* - 'y'*
* - 'y'*
* vars:*
* ansible_command_timeout: 14400*
-Bikram
On Fri, Jan 26, 2024 at 11:51 AM dbs34 <[email protected]> wrote:
>
> Hi Bikram,
>
> You could try splitting the tasks into two seperate tasks and adding a
> pause. see below.
>
> - name: Install new IOS image hosts: cisco_switches tasks: - name: Add
> IOS image ios_command: commands: - command: install add file
> flash:cat9k_iosxe.17.09.04a.SPA.bin
> activate commit prompt: - 'Please confirm you have changed boot config to
> flash:packages.conf [y/n]' answer: - y register: add_result - name:
> Confirm flash boot config pause: seconds: 15 when: add_result is
> succeeded - name: Activate IOS image ios_command: commands: - '' prompt: -
> 'This
> operation requires a reload of the system. Do you want to proceed? [y/n]'
> answer: - y when: add_result is succeeded
> On Thursday, January 25, 2024 at 4:10:02 PM UTC-5 Bikram wrote:
>
>> Hi Team,
>>
>> I am trying to upgrade a cat9300 switch from version 16.06.06 to
>> 17.09.04a. The switch is in bundle mode and will convert it to install mode
>> as well.
>>
>> Here is my task:
>>
>> - name: Install and activate new IOS image
>>
>> cisco.ios.ios_command:
>>
>> commands:
>>
>> - command: 'install add file flash:
>> cat9k_iosxe.17.09.04a.SPA.bin activate commit'
>>
>> prompt:
>>
>> - 'Please confirm you have changed boot config to
>> flash:packages.conf \[y/n\]'
>>
>> - 'This operation requires a reload of the system. Do you
>> want to proceed\? \[y/n\]'
>>
>> answer:
>>
>> - 'y'
>>
>> - 'y'
>>
>> register: install_image
>>
>> vars:
>>
>> ansible_command_timeout: 1400
>>
>>
>> Problem is dealing with multi prompt (with some delay between prompts).
>> My task can catch the first prompt and answer accordingly but failed to
>> catch the second prompt.
>>
>>
>> Here is the actual output when I upgrade the switch manually:
>>
>> XX-9300#install add file flash:cat9k_iosxe.17.09.04a.SPA.bin activate
>> commit
>> install_add_activate_commit: START Sat Jan 20 04:36:32 UTC 2024
>> install_add_activate_commit: Adding PACKAGE
>>
>>
>>
>> This operation requires a reload of the system. Do you want to proceed?
>> *Please confirm you have changed boot config to flash:packages.conf
>> [y/n]y*
>>
>>
>>
>> --- Starting initial file syncing ---
>> [1]: Copying flash:cat9k_iosxe.17.09.04a.SPA.bin from switch 1 to switch 2
>> Finished initial file syncing
>>
>> --- Starting Add ---
>> --- cut off some text----
>> Finished Add
>>
>> install_add_activate_commit: Activating PACKAGE
>> Following packages shall be activated:
>> /flash/cat9k-wlc.17.09.04a.SPA.pkg
>> ---cut off some text--
>>
>> *This operation requires a reload of the system. Do you want to proceed?
>> [y/n]y*
>> --- Starting Activate ---
>> Performing Activate on all members
>> [1] Activate package(s) on switch 1
>>
>>
>> Any help is much appreciated.
>>
>>
>> Thanks
>>
>> Bikram
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Ansible Project" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ansible-project/60d09529-517d-4e00-abb7-2b5e27031754n%40googlegroups.com
> <https://groups.google.com/d/msgid/ansible-project/60d09529-517d-4e00-abb7-2b5e27031754n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/CAEFfMJSChujwsQd73o3VVtSBDruDyVazNk3bq46RJGqsZsUv%3DA%40mail.gmail.com.
