Visit our website: HTTP://WWW.STOPNATO.ORG.UK
---------------------------------------------

Because the Towers were of unconventional steel
construction - grave doubts have been expressed over
the years, but always splatted.

The outer steel curtain wal and the central pylon held
up what was essentially a concrete slab floor.

If the supports at the edges go, the slab will fall.

When this happens the top of the building becomes a
pilegriver failing onto each floor in term, imploding
the building.

Steel becomes plastic and distorts at 800%, basically
they had about an hour once the fire stated.

 
--- Party of Citizens <[EMAIL PROTECTED]> wrote:
> Visit our website: HTTP://WWW.STOPNATO.ORG.UK
> ---------------------------------------------
> 
> Can anyone explain how a tower hit at the corner
> would fall 1-2 hours
> later in a perfect demolition manner (straight
> down)? How would the
> aircraft fuel manage to get distributed so
> consistently all over that
> layer of the building so as to weaken all of the
> vertical red iron to
> the same degree at the same time? Why didn't it
> collapse "lop-sided"? If
> this method works so well, all future
> construction-demolition projects
> should emulate it.
> POC
> 
> -------------------------------------------------
> This Discussion List is the follow-up for the old
> stopnato @listbot.com that has been shut down
> 
>
> 


__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/

-------------------------------------------------
This Discussion List is the follow-up for the old stopnato @listbot.com that has been 
shut down

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84x2u.a9spWA
Or send an email To: [EMAIL PROTECTED]
This email was sent to: [email protected]

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================

Reply via email to