> vblade-19 on the target side AoE v72 kernel module on the > initiator. Using mtu 9000 on all of the interfaces involved. HP > ProCurve 2810 switch with a dedicated VLAN for the AoE SAN. The switch > is set up for 9000 MTU also. The initiator says:
I had issues with a different HP set to 9000 MTU. The switch worked fine at 1500 MTU with very little retransmits and no noticeable throughput degradation but switching to 9000 seemed to confuse it and throughput went from around 90MB/s to around 1MB/s after a few seconds of continuous writing. Changing out the switch to a different brand cleared this ( running at 9000 MTU ) and it now has normal retransmissions without decreased throughput. This was running a newer kernel 2.6.26.8, newest vblade and the aoe initiator that comes with the vanilla kernel. Doing a direct connection worked fine for when I tested and like Ed said, it may have to do with your versions. -- Matth Ingersoll ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Aoetools-discuss mailing list Aoetools-discuss@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
