Well this is the demo code so I have not changed anything on the server or on the client, I gave you this info because I thought you were working on the development of APE :) As for the ajax calls yes, I double checked before sending the previous message (And I checked again as I write just to be sure ;))
As Anthony said this particular demo does not work (yet?), maybe the missing command server side is all that is needed and will be added in a future build? On Fri, Nov 13, 2009 at 4:05 PM, Dominik <[email protected]>wrote: > Hi! > > > > First connexion, closes immediately: > > [{"time":"1258122064","raw":"LOGIN","data": > > {"sessid":"46bd8bfbfee522da10e5591b855f88c3"}}, > > {"time":"1258122064","raw":"IDENT","data":{"user": > > > {"casttype":"uni","pubid":"5d63fc55190913a9af46ec8c732625fd","properties": > > {"name":"ugasy"}}}},{"time":"1258122064","raw":"CHANNEL","data": > > {"users": > > > [{"casttype":"uni","pubid":"5d63fc55190913a9af46ec8c732625fd","properties": > > {"name":"ugasy"},"level":1}],"pipe": > > > {"casttype":"multi","pubid":"9c7ee2a51059a68bb3705533fbf874b6","properties" > : > > {"name":"move"}}}}] > > That's the correct behaviour. > > > > > [{"time":"1258122068","raw":"CLOSE","data":{"value":"null"}}] > > Hm...usually this is the response when a request times out and a new > one is created, are you sure that you have chosen the right response? > > > > > [{"time":"1258122068","raw":"ERR","data":{"chl": > > 4,"code":"003","value":"BAD_CMD"}}] > > This response means, that there is no Javascript loaded on the server, > which registers the sent command... > As far as I remember the Browser send a SETPOS-Command when you change > the position...did you write and include an appropriate Javascript- > File on the server-side, which handles these commands. > So, did you include a Javascript which calls > > Ape.registerCmd('SETPOS', true, function(params, infos){ > //Code to send position to other users... > }); > > > Such a javascript is not shipped with the APE by default, you got to > write it on your own if I remember correctly... > > > > > > > Hope it helps! > > > > On Nov 13, 3:22 pm, Dominik <[email protected]> wrote: > > > > > > > > > And what is the response from the APE-Server when the connection is > > > closed after 10s? Is it the BAD_SESSION-error or which one? > > > > > On Nov 13, 3:06 pm, Cadrach <[email protected]> wrote: > > > > > > Wow thanks for all the quick answers! > > > > > > Ok, I deactivated the rewrite and the Chat demo now works properly, > > > > the Move demo still gets the same bug (as expected if I follow > > > > Anthony) > > > > > > Is the proxy feature going to disappear, or is it going to be > > > > functionnal again in the future? 6969 port cannot be open on all > > > > configuration, and sometimes even the 443 has to be used for > something > > > > else. > > > > > > As for the error itself in the Move demo, yes I use firebug and what > > > > happens is most of the time the pooled connection closes rather > > > > quickly (like 10s after loading if I click too much), and then there > > > > is no permanent loading ajax request. When you move however an ajax > > > > request is properly sent to ape, and closes immediatly. The other > > > > browser does not get the move even if the pooled connection is > > > > running. Dunno if it helps! > > > > > > Again thanks a lot for your answers, and keep up the excellent work! > > > > > > Cadrach > > > > > > On Nov 13, 2:23 pm, Anthony Catel <[email protected]> wrote: > > > > > > > > Hi Cadrach. > > > > > > > > APE 1.0 doesn't support Apache mod_proxy. (If you use the old > htaccess). > > > > > > Try a direct connection to APE by specifing the right port in > config.js > > > > > > > > Btw the demo doesn't work on 1.0 yet ;) > > > > > > > Oups : The demo "Move". Others work. > > > > > > > > Thanks > > > > > > > > Cadrach a crit : > > > > > > > >> The following issue happens on 1.0 Beta1 and 1.0 Beta5: > > > > > >> - The test page displays correctly > > > > > >> - The server is setup using apache with a rewrite rule, ape > listening > > > > > >> on port 6969 > > > > > > > >> When I load the "Move" demo on my first browser (FF for > example), the > > > > > >> bubble and random name display correctly > > > > > >> When I load the demo on my other browser (Safari for example), > the > > > > > >> bubble is created correctly, and appears in the first browser. > However > > > > > >> when I try to move, it does not move on the first browser. Same > if I > > > > > >> move something from the first browser: it does not move in the > second. > > > > > > > >> I have the same kind of issue with the chat: I connect using a > > > > > >> nickname, it appears immediatly on all connected browsers, but > > > > > >> messages (either personnal or on test channel) are not "sent" to > other > > > > > >> browser. > > > > > > > >> Even reloading the page does not change anything. > > > > > > > >> These demos worked when I used 0.9, any idea what might be > missing? > > -- > You received this message because you are subscribed to the Google > Groups "APE Project" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected]<ape-project%[email protected]> > For more options, visit this group at > http://groups.google.com/group/ape-project?hl=en > --- > APE Project (Ajax Push Engine) > Official website : http://www.ape-project.org/ > Git Hub : http://github.com/APE-Project/ -- You received this message because you are subscribed to the Google Groups "APE Project" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/ape-project?hl=en --- APE Project (Ajax Push Engine) Official website : http://www.ape-project.org/ Git Hub : http://github.com/APE-Project/
