Matt, do a Command-Control-Escape, and check the control panel, to make sure that the startup sequence is set to Scan (the default setting). Also, make sure that you do have the 3.5" drive connected first, then the 5.25" drive, and, also make sure that the Slot 6 assignment is set to Disk Port, instead of Your Card. With respect to the lid on the 3.5" drive, there are some tabs on it, IIRC that engage the bracket for the floppy drive, then, the bottom half gets attached to the drive. -J
Matt Jordan wrote: > > Hi, > > My Apple IIgs won't use the 5.25" floppy and 3.5" floppy at the same > time. If I have them both plugged in (chained) the IIgs will only try > to boot from the 5.25" disk no matter where it is in the chain. If > *only* the 3.5" floppy is plugged in then it will boot from that. If I > plug in the 5.25" disk later then the IIGS won't recognize it on the > desktop. If I do get it to recognize that drive whenever it tries to > copy a file from the 3.5" to the 5.25" drive it locks up. > > Anyone know how to fix this? > > Also, I had to remove the top of my 3.5" drive to readjust the drive > mechanism, anyone know how to reseat the top? I can't get it back on. > > Thanks a lot, > > Matt > -- Apple2list is sponsored by <http://lowendmac.com/> and... / Buy books, CDs, videos, and more from Amazon.com \ / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \ Support Low End Mac <http://lowendmac.com/lists/support.html> Apple2list info: <http://lowendmac.com/lists/apple2.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/apple2list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
