Hello all,
I had an easy installation on this computer. On the video setup
screen, I selected VGA 640x480 in the left column, and
640 x 480 1MB Hicolor in the right column, and this combo worked.
Had several other combinations that didn't, but was able to get
right back to video setup to try again with two "enters" on the
first two setup choices.
I already had a good arachne.cfg file in my Arachne 1.50 directory,
so the installation of 1.60 picked that right up. Actually, I had
just run Arachne 1.50 prior to this installation, and made sure
my ibmps1.acf was loaded into arachne.cfg.
I use another .acf also when I use my Netdial 1.3-Arachne combination
to load the packet driver (no really necessary on this IBM)
So I saved it onto a disk prior to the installation, so It wouldn't
be lost.
So far everything seems "normal".
Thanks,
Michael L. Dawley
Pearl, Missisippi
-- IBM PS/1 486SX-25 with 32MB RAM --
-- Arachne V1.60;b1, NON-COMMERCIAL copy, http://arachne.cz/
