HI ALL
I have just finished installing 1.60b1 on our pentium 200 download and install
went with no problems whole thing took about ten minutes and I was back on
line.
I also installed it on my 486 some trouble with exe download so used zip file
installation went ok only struck one problem so far and that was in video
selection. I have Tseng ET4000 video card witch had been running in 600x800 256
mode under 1.50src but in 1.60 there seems to be some problem (I no not what),
because the plus and minus keys do not work to change video mode when Tseng
600x800 option is selected. However I reloaded my tlivesa driver back in
autoexec and selected vesa 600x800 option and every thing works in that mode,
only problem being I have to use extra memory to load driver 4k ish I still have
enough to run ok but........
With 1.50 I had 139+ and after logon 70+ with 1.60 117+ after logon 92?
On the pentium under win95 (no gui installed) I get 129+ after logon 105?
with 1.50 it was 156+ and 110+.
By the way the windows button works on both machines for 95 and 3.11.
All in all a good package, downloads are definately quicker.
ARACHNE STILL REMAINS THE BEST THING I'VE SEEN IN AGES.
Wayne & Vicki
