Hello all, The new Arachne 1.60b1 allows several valid choices for the video setup, unlike 1.50, which required you to know what video you have installed on your box, or Arachne would perhaps crash. I have an Evergreen Technologies ETDIAG disk, that allowed me to (in some cases) to see my video setup, and between that and MSD, could make better choices during 1.60b1 video setup. On the first go around, before using ETDIAG, I setup Arachne, and was not entirely happy with the video quality. Did the setup again, and wound up with outstanding (for this box) video quality in Arachne. Setup in Arachne 1.60b1 is really a big improvement over 1.50, and in it's mandate to get you up and running can allow you to setup a video combination that is less than what you might get otherwise. Trying other combinations doesn't hurt, and if you have an image to use for comparison in your recent history, your results will be immediately obvious. Thanks, Michael L. Dawley Pearl, Mississippi -- IBM PS/1 486SX-25 with 32MB RAM -- -- Arachne V1.60;b1, NON-COMMERCIAL copy, http://arachne.cz/
