> My knowledge about dialers & packet-drivers is not much, so I am
> wondering if there is somebody who knows how to do this.
I don't have so much knowledge on this topic either, but since about one
week or so I'm connecting to my ISP over an ISDN line using Arachne without
any problems. I have a USRobotics Courier I-modem, and the first thing I had
to change was the
init string. Now I'm using AT&F*V2=5 This will load the default hardware
flow control profile (&F) and put the modem in "Internet access mode"
(*V2=5).
The second thing I had to change was to NOT use the login script, which I
use over an analog line. This is simply beacuse that I found that when I
connect to my ISP using ISDN there's no Username nor any Password prompts to
log in. But Arachne logs in properly in this case. My guess (somebody please
correct me if I'm wrong here) is that this is what they call a Chap/Pap
login (it appears that the login/user verification procedure is built-in in
the protocol).
Eventhough I do not entirely understand what I'm doing, it does work :-)
