Tom,
    Here are some directions for setup and sample Arachne 
config file sent into the Arachne list by Roger Turk.

   Eric
--------------------

Roger Turk Wrote:

We both have similar machines and I also use Freewwweb, so I think that I can 
help you in that respect.

=-=-=-=-=-=-=-=-=-=-=-

NOTE 1:  Give the "Profile" a name that will identify which profile you are 
using, e.g., FW.ACF for browsing using Freewwweb; FW-HOT.ACF for getting your 
mail from Hotmail, etc.

NOTE 2:  These would get your mail from Freewwweb, but not from Hotmail.  You 
would have to create a different profile to download your mail from Hotmail 
using the proper SMTP and POP3 entries for Hotmail.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Once you make the changes to ARACHNE.CFG and are able to browse the web thru 
Freewwweb, copy ARACHNE.CFG to FW.ACF (or whatever you want to name it).  
Then go thru ARACHNE.CFG again and make changes to SMTP and POP3 so that you 
can get mail from Hotmail.  Once that works, copy ARACHNE.CFG to FW-HOT.ACF 
(or whatever you want to name it.)

Freewwweb is apparently experiencing growing pains and has too few lines at 
their telephone numbers which makes connections hard some times of the day.

I am going to post this message to the list and also send it to your Hotmail 
and Freewwweb addresses.

Hope this helps.

Roger Turk
Tucson, Arizona  USA

Your ARACHNE.CFG was:

;This is ARACHNE.CFG for Arachne version 1.4+
;If you want to use Arachne on PC with CPU 486+ you should start here.
;(tested on AMD K5/133)
;This configuration file can be completely controled from Arachne setup.
;Run "setup" if you are not sure what to change in configuration file.

[profile]
Profile FASTPC.ACF               <---See NOTE 1
Connection @epppd.exe>>PPP.LOG
Hangup @termin.com 0x60>NUL

;Connection @cmd    ... command cmd will estabilish connection
;Connection READY   ... connection is permanent, packet driver in 
AUTOEXEC...
;Connection NUL     ... do not start TCP/IP (run "arachne -c" to force this)

[dialer]
DialPage file:ppp_init.htm
Dialer @MINITERM.EXE>PPP.LOG
TerminalWindow @MINITERM.EXE
UseTerminal Yes                  <---Change to No
Port 2
Irq 3
Base Default
Mode 8N1
Speed 115200
InitString AT&F
DialString ATDT
PhoneNumber 425-739-0181         <---If this is a local number in
                                    Kirkland, remove: 425-
                                    If it is not a local number, do
                                    you normally have to preceed this
                                    with 1?
Autologin No                     <---Change to Yes
WaitFor1 -                       <---Remove all hyphens! Replace this
                                    hyphen with:  ogin:
Response1 -                      <---Replace this hyphen with: \u (or
                                    your Freewwweb user name)
WaitFor2 -                       <---Replace this hyphen with: ord:
Response2 -                      <---Replace this hyphen with: \p (or
                                    your Freewwweb password)
WaitFor3 -                       <---Remove hyphen
Response3 -                      <---Remove hyphen
WaitFor4 -                       <---Remove hyphen
Response4 -                      <---Remove hyphen
PPPusername [EMAIL PROTECTED]
PPPpassword *********

;Base values: Default|0x??? (eg. 0x3e8)
;Mode values: databits/parity/stopbits (eg. 8N1)

[tcp/ip]
IP_Address PPP
IP_Grab IP address set to
NameServer 216.70.64.1
AltNameServer 216.70.64.2
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig PPPTCP.CFG

;IP_Address n.n.n.n  ... fixed IP address
;IP_Address PPP      ... for PPP.EXE and PPPD.EXE (get address from PPP.LOG)
;IP_Address BOOTP    ... WatTcp attepmts to use BOOTP protocol
;IP_Address %enviro% ... Minuet style (enviroment variable, like %MYIP%)
;IP_Address WATTCP   ... use ONLY values from TCPconfig (variable "my_ip")
;IP_Grab string      ... prefix of IP address in PPP.LOG ("IP address set 
to")
;TCPconfig filename  ... name of WatTcp configuration file (often 
WATTCP.CFG)

[mail]
SMTPserver smtp.freewwweb.com    <---See NOTE 2
POP3server pop.freewwweb.com     <---See NOTE 2
POP3username reubenl1            <---See NOTE 2
POP3password ************        <---See NOTE 2
KeepOnServer Yes                 <---Do you want to keep *all* your
                                    mail on the server or do you want 
                                    it deleted after you download it?
eMail [EMAIL PROTECTED]
PersonalName Reuben L
Organization Arachne Fan Club
TimeZone +0000
UseSignature No                  <---I have mine set to Yes
SignatureFile SIGN.TXT
MailEncoding MIME
MailSortOrder DateSnt
NoHELO No
KillSent No
MailIdxTemplate idxhead.htp
ForwardString1 ----- Forwarded message begin -----
ForwardString2 ------ Forwarded message end ------
ReplyString On %s, %s wrote:
MyCharset US-ASCII
MailBodyEncoding 7bit

;MailSortOrder values: DateRcv|DateSnt|Address|Subject

[internet]
HTTPproxy proxy.provider.com:8080
UseProxy No
HomePage http://home.arachne.cz/       <---To continue to use Freewwweb,
                                          this has to be Freewwweb's home 
                                          page, http://home.freewwweb.com
SearchPage http://search.arachne.cz/
SearchEngine http://www.altavista.com/cgi-bin/query?q=
FTPusername user
FTPpassword xxxxxx
FTPhost ftp.provider.com
FTPpath /www/html/arachne/index.html
AcceptCharset ISO-8859-1,*

[system]                <---To avoid problems, these should be 
                           changed to show the full path.
Hotlist .\HOTLIST.HTM
History .\HISTORY.LST
CookieFile .\COOKIES.LST
CacheIndex .\CACHE.IDX
CachePath CACHE\
Cache2TEMP No
MailPath MAIL\
DownloadPath DOWNLOAD\

[misc]
Logo 4000         <---To turn off flashing logo (XC), change to 0
LoadImages Yes
Frames Yes
JPEGargs -bmp
FILEargs -l
RefreshDelay 5    <---Try 20 or 60
ScreenSaver 10
ScreenSaverStyle L
ScreenSaverColors 0
ESC Exit
F3key file:*.htm     <---I have mine as: http://
AutoF3key Yes        <---I have mine as: No
BigFont No
ScrollBarSize 14
ScrollBarStyle NextStep    <---I have mine as: XchaosStep
Colors 14 0
MouseColors 15 15
VirtualScreen 5000         <---I have mine as: 0
ScreenMode Auto
SmoothScroll Yes           <---I have mine as: No
ScrollStep 50              <---I have mine as: 1000
BgColor #000000
Text #F0F0F0
Link #00FF00
Background back.gif
ExitOnHangup No
Buttons serious
ASCIIwidth 78
HTMLtext #000000
HTMLbgColor #C4C4C4
HTMLlink #0000C4
;AfterPOP3 smtp:
;AfterSMTP file:mail.htm
ShiftF1 file://doc/howto.htm
ShiftF2 file://oops\*.*
ShiftF3 file:*.*
ShiftF4 file://examples\newfile.htm
ShiftF5 http://www.yahoo.com/
ShiftF6 http://www.wired.com/
ShiftF7 http://www.altavista.com/
ShiftF8 http://www.hotbot.com/
ShiftF9 http://www.slashdot.org/
ShiftF10 file://readmail.dgi
AltTab No
EditHotlistEntry Yes
Autodial No
UseCID Yes           <---I have mine set to: No
UseCDescr Yes        <---I have mine set to: No
AltSysFont 0
Index *.htm
FontShift 0
Multitasking Yes
XMS4allGIFs 4096     <---I have turned off animation (set to 0)
XMS4oneGIF 1040000   <---I have turned off animation (set to 0)

;ScrollBarStyle values: NextStep|Windows|Arachne|X
;BgColor,Text,Link values: #RRGGBB (hexadecimal values of red, green and 
blue)
;VirtualScreen value: vertical number of pixels, 0 disables virtual screen.
;ScreenMode values: Auto|Smart|Nice
;BodyArachne values: System|Default|All
;Colors values are <ink 0..15> <paper 0..15>

[security]
SavePasswords Yes
Cookies Yes
HTTPreferer Yes
;FakeFTPeMail user@domain

[auto-added]
Kill468x60 No
CacheFonts Yes
ScreenSaverMess 10
Engine http://www.altavista.com/cgi-bin/query?q=
POP3log No
SMTPlog No
KeepHTT Yes
-


--
             __________
            |  Ayrx |__\_       Eric S. Emerson
            | E-male:~_: !      [EMAIL PROTECTED]
            `~(*)~~~~(*)~'      `````````````````````````    

Reply via email to