On Tue, 09 May 2000 18:53:47 +0000, Kali McLaughlin wrote:

> thereafter dysfunctional.  I am playing with teflon lubricated ones.
> Has anyone else theories on these?

(Kali was speaking about diskettes)

Kali, Try this:

                 PROPER DISKETTE CARE AND USAGE

(1)  Never leave diskettes in the drive, as the data can leak out
     of the disk and corrode the inner mechanics of the drive.
     Diskettes should be rolled up and stored in pencil holders.

(2)  Diskettes should be cleaned and waxed once a week.
     Microscopic metal particles may be removed by waving a
     powerful magnet over the surface of the disk.  Any stubborn
     metal shavings can be removed with scouring powder and steel
     wool.  When waxing a diskette, make sure the surface is
     even.  This will allow the diskette to spin faster,
     resulting in better access time.

(3)  Do not fold diskettes unless they do not fit into the drive.
     "Big" diskettes may be folded and used in "Little" drives.

(4)  Never insert a diskette into the drive upside down.  The
     data can fall off the surface of the disk and jam the
     intricate mechanics of the drive.

(5)  Diskettes cannot be backed up by running them through a
     photocopy machine. If your data is going to need to be
     backed up, simply insert TWO diskettes into your drive.
     Whenever you update a document, the data will be written
     onto both disks.  A handy tip for more legible backup
     copies:  keep a container of iron filings at your desk.
     When you need to make two copies, sprinkle iron filings
     liberally between the diskettes before inserting them into
     the drive.

(6)  Diskettes should not be removed or inserted from the drive
     while the red light is on or flashing. Doing so could result
     in smeared or possibly unreadable text.  Occasionally, the
     red light remains flashing in what is known as a "hung" or
     "hooked" state.  If your system is hooking, you will
     probably need to insert a few coins before being allowed to
     access the slot.

(7)  If your diskette is full and needs more storage space,
     remove the disk from the drive and shake vigorously for two
     minutes.  This will pack the data enough (data compression)
     to allow for more storage.  Be sure to cover all openings
     with scotch tape to prevent loss of data.

(8)  Data access time may be greatly improved by cutting more
     holes in the diskette jacket.  This will provide more
     simultaneous access points to the disk.

(9)  Periodically spray diskettes with insecticide to prevent
     system bugs from spreading.

-- 
Glenn McCorkle [EMAIL PROTECTED] North Jackson, Ohio, USA
DOS prog. for QV cameras http://www.angelfire.com/id/glenndoom/qvplay.html
Other stuff http:[EMAIL PROTECTED]/
            Arachne, The Web Browser for DOS
   Open the 'DOOR' to the WWW. Keep the 'windows' closed.
      http://arachne.browser.org/ http://arachne.cz/

Reply via email to