Arachne start HELP

[Bastiaan Edelman]

Hi, it's me again...   I followed Torbens advice and added: SHELL=COMMAND.COM /p /e:2048 because I also got: "Arachne is out of conventional (low) DOS memory" (I can see this under the NORTON COMMANDER screen with Ctrl+O) There are 13856 bytes missing. This number of bytes changes.   The system is not running on a plain DOS machine as Windows is also there, but... after 'start' the machine is not going at once to Windows because it is halted first by the 'NORTON COMMANDER'. Now I can do anything I want in DOS. (Pentium I  75MHz)   When I leave DOS by leaving "NORTON" (F10) the machine goes on entering Windows 95. I did install this sequence because by going to Windows first and then back to DOS by the Windows 'DOS-prompt' gives problems with DOS-programmes that uses a temporary file. E.g. wordprocessors like WordStar or WordPerfect than lose the latest changes made. If I go to DOS first and not through to Windows there is never any problem with any DOS program.   I will ad to this file the config.sys and autoexec.bat.   **** Is there a possibility to create a logfile for or into Arachne in order to see what is happening and to ease problem solving ? ****   ==>autoexec.bat Call C:\TBAV\tbstart.bat mode con codepage prepare=((437) C:\WINDOWS\COMMAND\ega.cpi) mode con codepage select=437 PATH C:\TBAV;C:\;C:\NORTON nc (TBAV is virusscanner)   ==>config.sys device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1) Country=031,850,C:\WINDOWS\COMMAND\country.sys SHELL=command.com /p /e:2048   Waiting for your comments and tnx, Bastiaan =========================================== BTW are there still HTML pieces at the end of this mail? Line length reduced to 65 caracters. ===========================================