On Tue, 20 Jun 2000 14:01:33 +0100, Udo Mark wrote:
> Dear Gentlemen,
> this is to ask for advice regarding problems with Arachne
> 1.61:
> The problem is: Having successfully dialled, after the last
> message (which is "Installed packed driver handler at
> vector 0x60"), the browser window shows up, says "TCP/IP"
> in the right lower corner, but the machine is hanged up
> (cannot move mouse or do anything else).
> This happens no matter whether I work via COM1 or COM2.
> Its a 66MHz 80486 PC with 16 MB RAM, running MS-DOS 5.0,
> with an "ELSA Microlink 28.8 TQV" modem on COM2, connected
> via ordinary (not ISDN) telephone line.
> Let me say thankyou if you could help me !!
> Yours Sincerely
> Udo Mark
> --------------------------------
> Udo Mark
> Soiherweg 5
> D-85567 Oberpframmern, Germany
> Phone: 49-8093-2455
> E-Mail: [EMAIL PROTECTED]
==================================
Dear Udo & Danny
I had some problems about one month ago and 'the list' helped me out.
First:
I had to less memory so Arachne crashed.
The list advised to close all programms not needed (e.g. Norton
Commander, text edittors, etc.) to free more memory for Arachne.
I also had to install a smaller mouse driver: CMOUSE is OK
Second:
The dialer in the .cfg file comes with default:
WaitFor1 -
Response1 - As Howard's example to the list dated 23 jun
Waitfor2 -
Response -
WaitFor3 -
......
This is not good. This should be:
WaitFor1 ogin: provider asking for Login:
Response1 \u Arachne answers \u (username)
WaitFor2 sword: provider asking for Password:
Response2 \p Arachne answers \p (password)
WaitFor3 - "-" is not given by provider so waiting untill
time out.
Delete all the "-" and fill in "blanks" or delete WaitFor3 and all the
waitFor and responses not needed by placing ";" at the beginning of each
unwanted line
; WaitFor3 -
; Response3 -
A good example is given by Glenn also on 23 jun
Hope this will help you .. it did to me; I am writing this with Arachne
Bastiaan
+
-- This mail was written by user of Arachne, the Ultimate Internet Client
-- Arachne V1.61, NON-COMMERCIAL copy, http://arachne.cz/
